Advertisement

Journal of Superhard Materials

, Volume 40, Issue 6, pp 414–423 | Cite as

A Study of the Tendency and Extent of Variation of Morphometric Characteristics of Standard Synthetic Diamond Grits in a Continuous Series of Their Grades and Sizes

  • G. A. Petasyuk
  • V. I. Lavrinenko
  • Yu. V. Sirota
  • D. G. Muzichka
Tools, Powders, Pastes
  • 3 Downloads

Abstract

The authors have performed analytical processing of great body of experimental data (obtained by them) on static strength and morphometric characteristics of standard (to DSTU 3292–95) synthetic diamond grits. This has revealed tendencies and an extent of variation of morphometric characteristics of the grits within a wide range of grades and grit sizes. A review of the relevant publications has been done, which has demonstrated the originality of the proposed problem statement. The paper defines the lines of further development of such investigations and shows their practical significance.

Keywords

synthetic diamond grits grade grit size morphometric characteristics static strength 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Linke, B.S, A review on properties of abrasive grits and grit selection, Int. J. Abrasive Technology, 2015, vol. 7, no. 1, pp. 46–58.CrossRefGoogle Scholar
  2. 2.
    Lavrinenko, V.I., Il’nitskaya, G.D., Petasyuk, G.A., Tkach, V.N., Smokvina, V.V., Shamraeva, V.S., Zaitseva, I.N., and Muzychka, D.G., The influence of physical-mechanical characteristics of AS6 synthetic diamond powders on wear resistance of grinding tools, J. Superhard Mater., 2013, vol. 35, no. 5, pp. 309–315.CrossRefGoogle Scholar
  3. 3.
    Lavrinenko, V.I., Smokvina, V.V., Petasyuk, G.A., and Il’nytska, G.D., Investigation of the influence of morphometric characteristics of superabrasive grits on the cutting ability of diamond abrasive tools, in Rezanie i instrument v tekhnologicheskikh systemakh. Mezhdunarodnyi nauchno-tekhnicheskii sbornik (Cutting and Tools in Manufacturing Systems. International Scientific-Technical Collection), 2014, issue 84, pp. 153–157.Google Scholar
  4. 4.
    Bogatyreva, G.P., Sizonenko, O.N., Oleinik, N.A., Petasyuk, G.A., Il’nitskaya, G.D., Shamrayeva, V.S., Bazaliy, G.A., Taftai, E.I., Zaichenko, A.D., Torpakov, A.S., and Lipyan, E.V., The influence of high-voltage electrical discharge treatment on morphometric characteristics of diamond powders, in Porodorazrushayushchii i metalloobrabatyvayushchii instrument—tekhnika i tekhnologiya ego primeneniya. Sb. Nauch. Tr. (Rock-Destruction and Metal-Working Tools. Techniques and Technology of Their Applications. Collected Research Papers), Kiev: ISM NAN Ukrainy, 2011, issue 14, pp. 272–277.Google Scholar
  5. 5.
    Novikov, N.V., Bogatyreva, G.P., Il’nitskaya, G.D., Petasyuk, G.A., Isonkin, A.M., and Zaitseva, I.N., The influence of uniformity of synthetic diamond grits on the drilling tool performance, J. Superhard Mater., 2012, vol. 34, pp. 141–147.CrossRefGoogle Scholar
  6. 6.
    Bogatyreva, G.P., Oleinik, N.A., Il’nitskaya, G.D., Petasyuk, G.A., Bogdanov, R.K., Isonkin, A.M., and Zakora, A.P., The properties of high-strength synthetic diamond powders recovered from used drilling tools, in Porodorazrushayushchii i metalloobrabatyvayushchii instrument—tekhnika i tekhnologiya ego primeneniya. Sb. Nauch. Tr. (Rock-Destruction and Metal-Working Tools. Techniques and Technology of Their Applications. Collected Research Papers), Kyiv: ISM NAN Ukrainy, 2009, issue 12, pp. 198–204.Google Scholar
  7. 7.
    Lavrinenko, V.I., Petasyuk, G.A., and Sukharev, D.V., Morphometric characteristics of synthetic diamond single crystals as a criterion for uniformity of wear of precision diamond dressing rolls, in Rezanie i instrument v tekhnologicheskikh systemakh. Mezhdunarodnyi nauchno-tekhnicheskii sbornik (Cutting and Tools in manufacturing Systems. International Scientific-Technical Collection), 2012, issue 81, pp. 162–169.Google Scholar
  8. 8.
    Nikitin, Yu.I., Uman, S.M., Kobernichenko, L.V., and Martynova, L.M., Poroshki i pasty iz sinteticheskikh almazov (Synthetic Diamond Powders and Pastes), Kiev: Naukova Dumka, 1992.Google Scholar
  9. 9.
    DSTU (Ukrainian State Standard) 3292–95: Synthetic Diamond Powders. General Specification, 1995.Google Scholar
  10. 10.
    TU U 28.5–054717377–072–2003. Synthetic Diamond Grits of Grades AS200, AS250, AS300, AS350, AS400, 2003.Google Scholar
  11. 11.
    List, E., Frenzel, J., and Vollstadt, H., A new system for single particle strength testing of grinding powders, Ind. Diamond Rev., 2006, no. 1, pp. 42–47.Google Scholar
  12. 12.
    Novikov, N.V., Nikitin, Yu.I., and Petasyuk, G.A., Computer-based diagnostic sieve for identification of grain size and grain size distribution in microscopic samples of diamond grinding powders, Sverkhtverdye Materialy, 2003, no. 3, pp. 71–83 [J. Superhard Mater., 2003, no. 3].Google Scholar
  13. 13.
    Loshak, M., Aleksandrova, L., and Kosenchuk, T., Strength of diamond crystals under static loading, Metrolog. Pryl., 2013, no. 2 (40), pp. 11–15.Google Scholar
  14. 14.
    Safonova, M.N., Petasyuk, G.A., and Syromyatnikova, A.S., Kompyuterno-analiticheskie metody diagnostiki ekspluatatsionnykh kharakteristik almaznykh poroshkov i kompozitsionnykh materialov na ikh osnove (Computer-Analytical Methods of Diagnostics of Performance Characteristics of Diamond Powders and Related Composites), Novosibirsk: Izd. SO RAN, 2013.Google Scholar
  15. 15.
    Petasyuk, G.A., Diagnostics of morphometric characteristics of powders of superhard materials by means of digital image processing, Vidb. Obrob. Inf., 2009, issue 30 (106), pp. 138–145.Google Scholar
  16. 16.
    Petasyuk, G.A., Scientific Basis of Comprehensive Assessment of Quality of Synthetic Diamond and CBN Powders for Manufacture of Abrasive Tools, Extended Abstract of Dr. Sci. (Eng.) Dissertation, Kyiv, 2015.Google Scholar
  17. 17.
    Novikov, N.V., Petasyuk, G.A., and Bogatyreva, G.P., A study of the influence of the sieve modulus and shape of openings on the fraction-wise yield of powder and size uniformity of the fractions identified by the sieve analysis, J. Superhard Mater., 2010, vol. 32, no. 4, pp. 280–291.CrossRefGoogle Scholar
  18. 18.
    Petasyuk, G.A. and Petasyuk, O.U., LrAprox computer software system for multivariant construction and analysis of empirical mathematical models, for the use in theoretical and applied problems of materials science, in Poroshkovaya metallurgiya. Resp. mezhved. sb. nauchn. trudov (Powder Metallurgy. Republican Interpdepartmental Book of Collected Research Papers), Minsk, 2008, issue 31, pp. 58–63.Google Scholar

Copyright information

© Allerton Press, Inc. 2018

Authors and Affiliations

  • G. A. Petasyuk
    • 1
  • V. I. Lavrinenko
    • 1
  • Yu. V. Sirota
    • 1
  • D. G. Muzichka
    • 2
  1. 1.Bakul Institute for Superhard MaterialsNational Academy of Sciences of UkraineKyivUkraine
  2. 2.Dniprovsk State Technical UniversityKamianskeUkraine

Personalised recommendations