Advertisement

Tensile Strain of Alloys with the Martensitic Transformation under the External Impact

  • A.V. Frolova
  • Yu. V. Tsarenko
  • V. V. Rubanik
  • V. V. StolyarovEmail author
  • V. V. RubanikJr.
Article
  • 3 Downloads

Abstract

The tensile strain of Ti50 – хNi50 + х shape-memory alloys in the austenitic and martensitic states is considered during the alternating action of a pulsed electric current and ultrasound at room temperature and 200°С. The changes in stress are analyzed at different combinations of ultrasound and/or current, the direction and volume of which depend on the phase state of the material and the degree of strain. The difference between the directions of the changes in stress in shape-memory alloys is associated with the position of the temperature of deformation relative to that of the formation of martensite.

Notes

FUNDING

This work was supported by the Russian Foundation for Basic Research, project no. 16-58-48001-IND_omi; and by the Belarus’ Foundation for Basic Research, grant no. T16R-152.

REFERENCES

  1. 1.
    Samigullina, A.A., Mukhametgalina, A.A., Sergeyev, S.N., et al., Ultrasonics, 2018, vol. 82, p. 313.CrossRefGoogle Scholar
  2. 2.
    Zhilyaev, A.P., Samigullina, A.A., Medvedeva, A.E., et al., Mater. Sci. Eng. A, 2017, vol. 698, p. 136.CrossRefGoogle Scholar
  3. 3.
    Stolyarov, V.V., Mater. Sci. Technol., 2015, vol. 31, no. 13A, p. 1536.CrossRefGoogle Scholar
  4. 4.
    Beridze, E., Gennari, C., Michieletto, F., and Forzan, M., Appl. Mech. Mater., 2015, vol. 698, p. 264.CrossRefGoogle Scholar
  5. 5.
    Ghiotti, A., Bruschi, S., Simonetto, E., et al., CIRP Ann. Manuf. Technol., 2018, vol. 67, no. 1, p. 289.CrossRefGoogle Scholar
  6. 6.
    Yuryev, V.A., Baranov, Yu.V., Stolyarov, V.V., Shulga, V.A., and Kostina, I.V., Bull. Russ. Acad. Sci.: Phys., 2008, vol. 72, no. 9, p. 1248.CrossRefGoogle Scholar
  7. 7.
    Shirinkina, I.G., Brodova, I.G., Astaf’ev, V.V., Yablonskikh, T.I., Stolyarov, V.V., Potapova, A.A., Frolova, A.V., Mukhgalin, V.V., and Bel’tyukov, A.L., Phys. Met. Metallogr., 2014, vol. 115, no. 12, p. 1221.ADSCrossRefGoogle Scholar
  8. 8.
    Xu, Z., Tang, G., Tian, S., et al., J. Mater. Proc. Technol., 2007, vol. 182, p. 128.CrossRefGoogle Scholar
  9. 9.
    Kozlov, A.V., Mordyuk, B.N., and Chernyashevsky, A.V., Mater. Sci. Eng. A, 1995, vol. 190, p. 75.CrossRefGoogle Scholar
  10. 10.
    Tsarenko, Yu.V., Rubanik, V.V., Lutsko, V.F., et al., Materialy 60-i mezhdunarodnoi nauchnoi konferentsii “Aktual’nye problemy prochnosti” (Proc. 60th Int. Sci. Conf. “Topical Strength Issues”), Vitebsk, 2018, p. 561.Google Scholar
  11. 11.
    Samigullina, A.A. Mukhametgalina, A.A., et al., Materialy mezhdunarodnoi nauchnoi konferentsii “Ul’trazvuk: problemy, razrabotki, perspektivy” (Proc. Int. Sci. Conf. “Ultrasound: Problems, Developments, Perspectives”), Ufa, 2017, p. 71.Google Scholar
  12. 12.
    Potapova, A.A., Stolyarov, V.V., Bondarev, A.B., and Andreev, V.A., Mashinostr. Inzh. Obraz., 2012, vol. 2, p. 33.Google Scholar
  13. 13.
    Rubanik, V.V., Rubanik, V.V., Dorodeiko, V.G., and Miliukina, S.N., Mater. Sci. Forum, 2013, vols. 738–739, p. 362.CrossRefGoogle Scholar
  14. 14.
    Misochenko, A.A., Tsarenko, Yu.V., Rubanik, V.V., and Stolyarov, V.V., Materialy mezhdunarodnoi nauchnoi konferentsii “Ul’trazvuk: problemy, razrabotki, perspektivy” (Proc. Int. Sci. Conf. “Ultrasound: Problems, Developments, Perspectives”), Ufa, 2017, p. 41.Google Scholar
  15. 15.
    Brailovski, V., Prokoshkin, S., Terriault, P., and Trochu, F., Shape Memory Alloys: Fundamentals, Modelling and Applications, Quebec: Univ. of Quebec, 2003.Google Scholar

Copyright information

© Allerton Press, Inc. 2019

Authors and Affiliations

  • A.V. Frolova
    • 1
  • Yu. V. Tsarenko
    • 2
  • V. V. Rubanik
    • 2
  • V. V. Stolyarov
    • 1
    • 3
    Email author
  • V. V. RubanikJr.
    • 2
  1. 1.National Research Nuclear University MEPhI (Moscow Engineering Physics Institute)MoscowRussia
  2. 2.Institute of Technical Acoustics, Belarus’ Academy of SciencesVitebskBelarus
  3. 3.Blagonravov Mechanical Engineering Research Institute, Russian Academy of SciencesMoscowRussia

Personalised recommendations