Advertisement

Steel in Translation

, Volume 48, Issue 7, pp 430–434 | Cite as

Quality of Rolled Steel for Cold Bulk Stamping

  • A. A. Filippov
  • G. V. Pachurin
  • N. A. Kuz’min
  • Yu. I. Matveev
  • V. B. Deev
Article
  • 2 Downloads

Abstract

Metal products obtained from rolled blanks by cold upsetting are used in every branch of manufacturing. The quality of such components is assessed in terms of the required chemical composition and the plasticity, the consistency of the mechanical characteristics over the whole length, and the lack of internal and surface defects. If such metal components are to be competitive, all the steps in the production chain must be optimized: from smelting of the steel to cold upsetting of the product. In attempting to minimize costs and ensure the required quality, it is important to ensure safety and to decrease energy and labor costs in manufacturing. In this chain, the preparation of the material for cold bulk stamping is a key step. The high-strength fasteners obtained by cold upsetting are most often made of chrome steel. Recently, alternative boron-bearing steels have been actively introduced. However, their thermal hardening in quenching is unstable because boron oxides and nitrides may be formed, with decrease in their hardenability. In addition, chrome steels are 12–16% cheaper, as a rule. Also, since foreign supplies of boron steels are associated with additional costs, fasteners made of boron steels are even more expensive. That is a further impetus to using chrome steels. In the present work, we obtain standard mechanical characteristics and failure criteria for 40Kh steel components patented in a saltpeter bath at different temperatures, with subsequent drawing. The optimal preparation of the rolled steel in terms of its structural and mechanical characteristics after cold bulk stamping is determined: patenting (in a saltpeter bath at 400°C) and drawing (with 5–10% reduction). Such treatment yields products of the required quality and is preferable to the existing technology.

Keywords

hot-rolled steel cold bulk stamping fasteners defects heat treatment reduction structure mechanical properties 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Terent’ev, V.F., Ustalostnaya prochnost’ metallov i splavov (Fatigue Strength of Metals and Alloys), Moscow: Intermet Inzhiniring, 2002.Google Scholar
  2. 2.
    Terent’ev, V.F., Ustalost’ metallicheskikh materialov (Fatigue of Metal Materials), Moscow: Nauka, 2003.Google Scholar
  3. 3.
    Terent’ev, V.F. and Petukhov, A.N., Ustalost’ vysokoprochnykh metallicheskikh materialov (Fatigue of High-Strength Metal Materials), Moscow: Inst. Metall. Materialoved., Ross. Akad. Nauk, Tsentr Inst. Aviats. Motorostr., 2013.Google Scholar
  4. 4.
    Gurov, V.D. and Vinogradov, A.G., Improvement in quality of fasteners, Stal’, 2005, no. 12, pp. 52–54.Google Scholar
  5. 5.
    Sokolov, A.A. and Artyukhin, V.I., Criteria of the choice of materials and technological parameters for production of a wire for cold volume forging, Metizy, 2008, no. 2 (18), pp. 50–54.Google Scholar
  6. 6.
    Amirov, M.G. and Lavrinenko, Yu.A., Osnovy tekhnologii avtomatizirovaniya kholodnovysadochnogo proizvodstva. Uchebnoe posobie (Technological Basics of Automation of Cold Headed Production: Manual), Ufa: Ufimsk. Aviats. Inst., 1992.Google Scholar
  7. 7.
    Moiseichik, E.A., Operation of stretched high-strength bolts in elements of steel structures and their tendency to the slow destruction, Vestn. Mosk. Gos. Stroit. Univ., 2014, no. 11, pp. 58–67.Google Scholar
  8. 8.
    Bunatyan, G.V., Fasteners: prospects in consolidation, Metizy, 2010, no. 1 (22), pp. 12–15.Google Scholar
  9. 9.
    Pachurin, G.V. and Vlasov, V.A., Mechanical properties of sheet structural steels at operating temperatures, Met. Sci. Heat Treat., 2014. V. 56, nos. 3–4, pp. 219–223.Google Scholar
  10. 10.
    Lavrinenko, V.Yu., Mathematical models of processes of cold volume forging of fasteners, Metizy, 2007, no. 1, pp. 35–37.Google Scholar
  11. 11.
    Tomigana, D., Vakimoto, K., Mori, T., Murakami, M., and Ioshimura, T., Production of rod iron with high ability to scale removal, Metizy, 2008, no. 2 (18), pp. 32–42.Google Scholar
  12. 12.
    Zinuti, A. and Saro, D., Drawing of a wire on mills, Metizy, 2003, no. 2 (3), pp. 41–47.Google Scholar
  13. 13.
    Kulesha, V.A., Features of production of steel for highquality metalwares, Trudy tret’ego kongressa prokatchikov (Proc. Third Congr. of Roller Mill Operators), Moscow, 2000, pp. 543–546.Google Scholar
  14. 14.
    Pachurin, G.V. and Filippov, A.A., Economical preparation of 40X steel for cold upsetting of bolts, Russ. Eng. Res., 2008, vol. 28, no. 7, pp. 670–673.CrossRefGoogle Scholar
  15. 15.
    Filippov, A.A., Pachurin, G.V., Naumov, V.I., and Kuz’min, N.A., Low-cost treatment of rolled products used to make long high-strength bolts, Metallurgist, 2016, V. 59, no. 9–10, pp. 810–815.Google Scholar
  16. 16.
    Ivchenko, A.V., Ambrazhei, M.Yu., Machuskaya, N.D., and Kokashinskaya, G.V., High-strength fastener of 8.8 class from thermomechanically strengthened rod iron, Metizy, 2010, no. 1 (22), pp. 58–63.Google Scholar
  17. 17.
    Galkin, V.V., On microstructural assessment of distribution of plastic deformations of metal of cold headed fasteners, Kuznechno-Shtampovochnoe Proizvod.-Obrab. Mater. Davleniem, 2014, no. 8, pp. 11–14.Google Scholar
  18. 18.
    Galkin, V.V., Structural and deformation assessment of metal hardening in multioperational processes of cold deformation, Uprochnyayushchie Tekhnol. Pokrytiya, 2014, no. 8, pp. 8–12.Google Scholar
  19. 19.
    Pachurin, G.V. and Filippov, A.A., Rational reduction of hot-rolled 40X steel before cold upsetting, Steel Transl., 2008, vol. 38, no. 7, pp. 522–524.CrossRefGoogle Scholar
  20. 20.
    Skudnov, V.A., Sinergetika yavlenii i protsessov v metallovedenii, uprochnyayushchikh tekhnologiyakh i razrushenii: uchebnoe posobie dlya studentov vuzov (Synergy of Phenomena and Processes in Metal Science, Strengthening Technologies, and Destruction: Manual for Higher Education Institutions), Nizhny Novgorod: Nizhegorod. Gos. Ttekh. Univ., 2007.Google Scholar

Copyright information

© Allerton Press, Inc. 2018

Authors and Affiliations

  • A. A. Filippov
    • 1
  • G. V. Pachurin
    • 1
  • N. A. Kuz’min
    • 1
  • Yu. I. Matveev
    • 2
  • V. B. Deev
    • 3
  1. 1.Alekseev Nizhny Novgorod State Technical universityNizhny NovgorodRussia
  2. 2.Volga State University of Water TransportNizhny NovgorodRussia
  3. 3.National University of Science and Technology “MISIS,”MoscowRussia

Personalised recommendations