Advertisement

Automatic Control and Computer Sciences

, Volume 52, Issue 6, pp 489–495 | Cite as

Theoretical Design of Band Pass Filter Utilizing Long Period Fiber Grating Having Cladding Refractive Index Perturbation

  • Jie Shen
  • Qiuping Ji
  • Yaoju Zhang
  • Xiukai Ruan
  • Zhennao Cai
  • Zhihong LiEmail author
Article
  • 8 Downloads

Abstract

In this work, theoretical design of a novel band pass filter based on the turning-around-point long period fiber grating (TAP-LPFG) having cladding index modulation is proposed and demonstrated. Cladding modes are excited by introducing the incident light into the fiber cladding of the input end of the TAP-LPFG. At the grating region, only those cladding modes that satisfy the phase matching condition couple back to the fiber core to obtain the band pass transmission. It is shown that a band pass filter with –3 dB width of from ~115 to ~198 nm with the center wavelength of ~1554.4 nm can be obtained, and the suppression of more than 10 dB for the side-lobes is achieved in a wide wavelength range. This novel TAP-LPFG based device can find applications in optical communications for wide band pass filter.

Keywords:

band pass filter long period fiber grating (LPFG) turning around point (TAP) cladding refractive index modulation 

Notes

ACKNOWLEDGMENTS

This work was supported by Natural Science Foundation of China (nos. 61377021 and 61671329) and Science and Technology Plan Project of Wenzhou of China (no. H20110003).

REFERENCES

  1. 1.
    James, S. and Tatam, R., Optical fibre long-period grating sensors: Characteristics and application, Meas. Sci. Technol., 2003, vol. 14, no. 5, pp. R49–R61.CrossRefGoogle Scholar
  2. 2.
    Erdogan, T., Cladding-mode resonances in short-and long-period fiber grating filters, J. Opt. Soc. Am. A, 1997, vol. 14, no. 8, pp. 1760–1773.CrossRefGoogle Scholar
  3. 3.
    Vengsarkar, A.M., Lemaire, P.J., Judkins, J.B., Bhatia, V., Erdogan, T., and Sipe, J.E., Long-period fiber gratings as band-rejection filters, J. Lightwave Technol., 1996, vol. 14, no. 1, pp. 58–65.CrossRefGoogle Scholar
  4. 4.
    Choi, S., Eom, T.J., Yu, J.W., Lee, B.H., and Oh, K., Novel all-fiber bandpass filter based on hollow optical fiber, IEEE Photon. Technol. Lett., 2002, vol. 14, no. 12, pp. 1701–1703.CrossRefGoogle Scholar
  5. 5.
    Mohammed, W.S. and Gu, X., Fiber optics devices based on selective modal excitation, 2011 2nd International Conference on Photonics, Kota Kinabalu, 2011, pp. 1–4.Google Scholar
  6. 6.
    Song, W., Kim, D.Y., Yu, B.A., Lee, J.H., and Shin, W., All-fiber band pass filter based on long period fiber grating pair and null core fiber for applications in 2 Qm band, 2015 Opto-Electronics and Communications Conference (OECC), Shanghai, 2015.Google Scholar
  7. 7.
    Zhang, Q., Zhu, T., Shi, L., and Liu, M., All-fiber bandpass filter based on asymmetrical modes exciting and coupling, Opt. Commun., 2013, vol. 286, no. 2013, pp. 161–165.Google Scholar
  8. 8.
    Sakata, H., Kibune, T., and Sano, H., Bandpass filter response through concatenation of graded-index and step-index few-mode fibers, J. Lightwave Technol., 2016, vol. 34, no. 13, pp. 3206–3211.CrossRefGoogle Scholar
  9. 9.
    Abrishamian, F. and Morishita, K., Single-channel bandpass filters formed by a metal-doped fiber and long-period gratings, IEEE Photon. Technol. Lett., 2016, vol. 28, no. 8, pp. 868–871.CrossRefGoogle Scholar
  10. 10.
    Li, Z., Ruan, X., Dai, Y., Zhang, Z., Zhou, Y., Chen, T., and Xie, Z., Numerical analysis of high-sensitivity refractive index sensor based on LPFG with bandpass transmission, IEEE Sensors J., 2016, vol. 16, no. 20, pp. 7500–7507.CrossRefGoogle Scholar
  11. 11.
    Mohammed, W.S., Mehta, A., and Johnson, E.G., Wavelength tunable fiber lens based on multimode interference, J. Lightwave Technol., 2004, vol. 22, no. 2, pp. 469–477.CrossRefGoogle Scholar
  12. 12.
    Anemogiannis, E., Glytsis, E.N., and Gaylord, T.K., Transmission characteristics of long-period fiber gratings having arbitrary azimuthal/radial refractive index variations, J. Lightwave Technol., 2003, vol. 21, no. 1, pp. 218–227.CrossRefGoogle Scholar
  13. 13.
    Brunet, C., Ung, B., Bélanger, P.A., Messaddeq, Y., LaRochelle, S., and Rusch, L.A., Vector mode analysis of ring-core fibers: Design tools for spatial division multiplexing, J. Lightwave Technol., 2014, vol. 32, no. 23, pp. 4648–4659.CrossRefGoogle Scholar
  14. 14.
    Zhu, X., Yuan, L., Yang, J., and Cao, S., Coupling model of standard single-mode and capillary fiber, Appl. Opt., 2009, vol. 48, no. 29, pp. 5624–5628.CrossRefGoogle Scholar

Copyright information

© Allerton Press, Inc. 2018

Authors and Affiliations

  • Jie Shen
    • 1
  • Qiuping Ji
    • 1
  • Yaoju Zhang
    • 1
    • 2
  • Xiukai Ruan
    • 1
    • 2
  • Zhennao Cai
    • 1
  • Zhihong Li
    • 1
    • 2
    Email author
  1. 1.College of Physics and Electronic Information Engineering, Wenzhou UniversityWenzhouChina
  2. 2.Institute of Laser and Optoelectronics, Wenzhou UniversityWenzhouChina

Personalised recommendations