Skip to main content
Log in

Ni-W alloy coatings deposited from a citrate electrolyte

  • Original Paper
  • Published:
Chemical Papers Aims and scope Submit manuscript

Abstract

Ni-W alloy coatings were deposited by applying current pulses with different pulse parameters at 60°C onto mild steel substrates from aqueous electrolytes with different tungstate concentration. Morphology and composition of the alloys were analyzed by SEM and EDX, respectively. XRD was used to determine metallic phases. Scanning electron micrographs revealed that deposition parameters had a strong effect on the morphology of the coatings. Increasing the duty cycle or decreasing the off time led to a compact morphology. Corrosion properties of the coatings were investigated by potentiodynamic polarization in a chloride medium. It was found that compact morphology of the deposits and high content of tungsten in the coating contribute to satisfactory corrosion results of Ni-W alloy coatings under the conditions studied.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  • Alimadadi, H., Ahmadi, M., Aliofkhazraei, M., & Younesi, S. R. (2009). Corrosion properties of electrodeposited nanocrystalline and amorphous patterened Ni-W alloy. Materials & Design, 30, 1356–1361. DOI: 10.1016/j.matdes.2008.06.036.

    Article  CAS  Google Scholar 

  • Atanassov, N., Gencheva, K., & Bratoeva, M. (1997). Properties of nickel-tungsten alloys electrodeposited from sulphamate electrolyte. Plating and Surface Finishing, 84, 67–71.

    CAS  Google Scholar 

  • Bard, A. J., & Faulkner, L. R. (2001). Electrochemical methods (Vol. II). New York, NY, USA: Wiley.

    Google Scholar 

  • Brenner, A. (1963). Electrodeposition of alloys (Vol. II). New York, NY, USA: Academic Press.

    Google Scholar 

  • de Lima-Neto, P., Correia, A. N., Santana, R. A. C., Colares, R. P., Barros, E. B., Casciano, P. N. S., & Vaz, G. L. (2010). Morphological, structural, microhardness and electrochemical characterizations of electrodeposited Cr and Ni-W coatings. Electrochimica Acta, 55, 2078–2086. DOI: 10.1016/j.electacta.2009.11.037.

    Article  Google Scholar 

  • Donten, M., & Stojek, Z. (1996). Pulse electroplating of rich-in-tungsten thin layers of amorphous Co-W alloys. Journal of Applied Electrochemistry, 26, 665–672. DOI: 10.1007/bf00253466.

    Article  CAS  Google Scholar 

  • Eliaz, N., Sridhar, T. M., & Gileadi, E. (2005). Synthesis and characterization of nickel tungsten alloys by electrodeposition. Electrochimica Acta, 50, 2893–2904. DOI: 10.1016/j.electacta.2004.11.038.

    Article  CAS  Google Scholar 

  • Farzaneh, M. A., Zamanzad-Ghavidel, M. R., Raeissi, K., Golozar, M. A., Saatchi, A., & Kabi, S. (2011). Effects of Co and W alloying elements on the electrodeposition aspects and properties of nanocrystalline Ni alloy coatings. Applied Surface Science, 257, 5919–5926. DOI: 10.1016/j.apsusc.2011.02.008.

    Article  CAS  Google Scholar 

  • Gáliková, Z., Chovancová, M., & Danielik, V. (2006). Properties of Ni-W alloy coatings on steel substrate. Chemical Papers, 60, 353–359. DOI: 10.2478/s11696-006-0064-2.

    Article  Google Scholar 

  • Hui, W. H., Liu, J. J., & Chaug, Y. S. (1994). A study of the corrosion resistance of brush plated Ni-Fe-W-P films. Surface & Coatings Technology, 68, 546–551. DOI: 10.1016/0257-8972(94)90215-1.

    Article  Google Scholar 

  • Joska, L., & Novák, P. (2001). Polarization resistance. In Proceedings of the 2nd International Conference Corrosion and Influence on Steel Constructions, March 12–13, 2001 (pp. 61–66). Brno, Czech Republic.

  • Juškènas, R., Valsiunas, I., Pakštas, V., & Giraitis, W. (2009). On the state of W in electrodeposited Ni-W alloys. Electrochimica Acta, 54, 2616–2620. DOI: 10.1016/j.electacta.2008.10.060.

    Article  Google Scholar 

  • Landolt, D., & Marlot, A. (2003). Microstructure and composition of pulse-plated metals and alloys. Surface and Coatings Technology, 169–170, 8–13. DOI: 10.1016/s0257-8972(03)00042-2.

    Article  Google Scholar 

  • Lillard, R. S., Kanner, G. S., & Daemen, L. L. (2002). The influence of a mixed radiation environment on the properties of the passive film on tungsten. Electrochimica Acta, 47, 2473–2482. DOI: 10.1016/s0013-4686(02)00107-x.

    Article  CAS  Google Scholar 

  • Mizushima, I., Tang, P. T., Hansen, H. N., & Somers, M. A.J. (2005). Development of a new electroplating process for Ni-W alloy deposits. Electrochimica Acta 51, 888–896. DOI: 10.1016/j.electacta.2005.04.050.

    Article  CAS  Google Scholar 

  • Oblonsky, L. J., & Devine, T.M. (1995). A surface enhanced Raman spectroscopic study of the passive films formed in borate buffer on iron, nickel, chromium and stainless steel. Corrosion Science, 37, 17–41. DOI: 10.1016/0010-938x(94)00102-c.

    Article  CAS  Google Scholar 

  • Obradović, M. D., Bošnjakov, G. Ž., Stevanović, R. M., Maksimović, M. D., & Despić, A. R. (2006). Pulse and direct current plating of Ni-W alloys from ammonia-citrate electrolyte. Surface and Coatings Technology, 200, 4201–4207. DOI: 10.1016/j.surfcoat.2004.12.013.

    Article  Google Scholar 

  • Puippe, J. C., & Leaman, F. (1986). Theory and practice of pulse plating. Orlando, FL, USA: American Electroplaters and Surface Finisher Society.

    Google Scholar 

  • Schacham-Diamand, Y., & Lopatin, S. (1999). Integrated electroless metalization for ULSI. Electrochimica Acta, 44, 3639–3649. DOI: 10.1016/s0013-4686(99)00067-5.

    Article  Google Scholar 

  • Schultze, J. W., & Bresel, A. (2001). Principles of electrochemical micro- and nano-system technologies. Electrochimica Acta, 47, 3–21. DOI: 10.1016/s0013-4686(01)00584-9.

    Article  CAS  Google Scholar 

  • Slavcheva, E., Mokwa, W., & Schnakenberg, U. (2005). Electrodeposition and properties of NiW films for MEMS application. Electrochimica Acta, 50, 5573–5580. DOI: 10.1016/j.electacta.2005.03.059.

    Article  CAS  Google Scholar 

  • Sriraman, K. R., Ganesh Sundara Raman, S., & Seshdari, S. K. (2007). Corrosion behaviour of electrodeposited nanocrystalline Ni-Wand Ni-Fe-Walloys. Materials Science and En gineering: A, 460–461, 39–45. DOI: 10.1016/j.msea.2007.02. 055.

    Article  Google Scholar 

  • Tury, B., Lakatos-Varsányi, M., & Roy, S. (2006). Ni-Co alloys plated by pulse currents. Surface and Coatings Technology, 200, 6713–6717. DOI: 10.1016/j.surfcoat.2005.10.008.

    Article  CAS  Google Scholar 

  • Yamasaki, T., Tomohira, R., Ogino, Y., Schlossmacher, P., & Ehrlich, K. (2000). Formation of ductile amorphous & nanocrystalline Ni-W alloys by electrodeposition. Plating and Surface Finishing, 87, 148–152.

    CAS  Google Scholar 

  • Younes, O., & Gileadi, E. (2002). Electroplating of Ni/Walloys. Journal of The Electrochemical Society, 149, C100–C111. DOI: 10.1149/1.1433750.

    Article  CAS  Google Scholar 

  • Younes-Metzler, O., Zhu, L., & Gileadi, E. (2003). The anomalous codeposition of tungsten in the presence of nickel. Electrochimica Acta, 48, 2551–2562. DOI: 10.1016/s0013-4686(03)00297-4.

    Article  CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Matilda Zemanová.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Zemanová, M., Kurinec, R., Jorík, V. et al. Ni-W alloy coatings deposited from a citrate electrolyte. Chem. Pap. 66, 492–501 (2012). https://doi.org/10.2478/s11696-011-0116-0

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.2478/s11696-011-0116-0

Keywords

Navigation