Abstract
The aim of this work was to investigate the displacement washing of kraft pulp manufactured from a blend of hardwoods. The experiments were carried out in a laboratory washing cell. In order to characterise the pulp fibres, the degree of freeness, kappa number, fibre length, as well as the specific volume and specific surface of swollen fibres were determined. The displacement washing process was described by displacement washing curves recorded for alkali lignin as a tracer. Mathematical treatment of the washing curves, obtained as a response to the step input signal, gave the Péclet number characterising the displacement of alkali lignin from the pulp pad. For detailed description of the displacement washing process, further parameters, such as the traditional wash yield, axial dispersion coefficient as well as the mean residence time and the space time were also evaluated. The results obtained for hardwood pulp were compared with those for softwood pulp published earlier. With respect to different chemical composition and morphological characteristics affecting both concentration of alkali lignin in mother liquor and physical properties of pulp pad, the displacement washing efficiency of hardwood pulp was found to be unambiguously greater in comparison with softwood pulp.
Similar content being viewed by others
References
Blažej, A., & Krkoška, P. (1989). Technológia výroby papiera. Bratislava, Slovakia: Alfa.
Brenner, H. (1962). The diffusion model of longitudinal mixing in beds of finite length. Numerical values. Chemical Engineering Science, 17, 229–243. DOI: 10.1016/0009-2509(62)85002-7.
Grähs, L.-E. (1976). Displacement washing of packed beds of cellulose fibres. Part 3. A comparison of the washing behaviour of sodium and lignin. Svensk Papperstidning, 79, 123–128.
Ingmanson, W. L. (1953). Filtration resistance of compressible materials. Chemical Engineering Progress, 49(11), 577–584.
Lee, P. F. (1979). Optimizing the displacement washing of pads of wood pulp fibers. Tappi Journal, 62(9), 75–78.
Lee, P. F. (1984). Channeling and displacement washing of wood pulp fiber pads. Tappi Journal, 67(11), 100–103.
Mauret, E., & Renaud, M. (2002). Measurement of axial dispersion in fibre beds: application to displacement washing of pulp. Appita Journal, 55, 123–129.
Poirier, N. A., Crotogino, R. H., Trinh, D. T., & Douglas, W. J. M. (1987). Displacement washing of wood pulp — an experimental study at low initial liquor concentration. In Proceedings of Pulp Washing Symposium, May 19–21, 1987 (pp. 1–19). Mariehamn, Finland.
Potůček, F. (1997). Washing of pulp fibre bed. Collection of Czechoslovak Chemical Communications, 62, 626–644. DOI: 10.1135/cccc19970626.
Potůček, F. (2003). Displacement and leaching — two principal mechanisms of displacement washing of pulp. Cellulose Chemistry and Technology, 37, 141–152.
Potůček, F., & Marhanová, M. (2002). Displacement washing of pulp with solutions of cationic polyacrylamides in water. Cellulose Chemistry and Technology, 36, 527–542.
Potůček, F., & Pulcer, M. (2004). Displacement of black liquor from pulp bed. Chemical Papers, 58, 377–381.
Sherman, W. R. (1964). The movement of a soluble material during the washing of a bed of packed solids. AIChE Journal, 10, 855–860. DOI: 10.1002/aic.690100615.
Tappi Test Methods (2004). Tappi Test Methods. Atlanta, Georgia: Tappi Press.
Trinh, D. T., Poirier, N. A., & Crotogino, R. H. (1987). Displacement washing of wood pulp — an experimental study at high initial liquor concentration. In Proceedings of Pulp Washing Symposium, May 19–21, 1987 (pp. 21–34). Mariehamn, Finland.
Trinh, D. T., Poirier, N. A., Crotogino, R. H., & Douglas, W. J. M. (1989). Displacement washing of wood pulp — an experimental study. Journal of Pulp and Paper Science, 15(1), J28–J35.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Potůček, F., Miklík, J. Displacement washing of kraft pulp cooked from a blend of hardwoods. Chem. Pap. 64, 147–153 (2010). https://doi.org/10.2478/s11696-009-0078-7
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.2478/s11696-009-0078-7