Abstract
We investigate motion synchronization of dual-cylinder pneumatic servo systems and develop an adaptive robust synchronization controller. The proposed controller incorporates the cross-coupling technology into the integrated direct/indirect adaptive robust control (DIARC) architecture by feeding back the coupled position errors, which are formed by the trajectory tracking errors of two cylinders and the synchronization error between them. The controller employs an online recursive least squares estimation algorithm to obtain accurate estimates of model parameters for reducing the extent of parametric uncertainties, and uses a robust control law to attenuate the effects of parameter estimation errors, unmodeled dynamics, and disturbances. Therefore, asymptotic convergence to zero of both trajectory tracking and synchronization errors can be guaranteed. Experimental results verify the effectiveness of the proposed controller.
Similar content being viewed by others
References
Carneiro, J.F., de Almeida, F.G., 2006. Reduced-order thermodynamic models for servo-pneumatic actuator chambers. Proc. Inst. Mech. Eng. Part I: J. Syst. Contr. Eng., 220(4): 301–314. [doi:10.1243/09596518JSCE203]
Chen, C., Liu, L., Cheng, C., et al., 2008. Fuzzy controller design for synchronous motion in a dual-cylinder electrohydraulic system. Contr. Eng. Pract., 16(6):658–673. [doi:10.1016/j.conengprac.2007.08.005]
Chen, C.Y., 2007. Synchronous motion of two-cylinder electrohydraulic system with unbalanced loading and uncertainties. Proc. Inst. Mech. Eng. Part I: J. Syst. Contr. Eng., 221(7):937–955. [doi:10.1243/09596518JSCE372]
Hsieh, M., Tung, C., Yao, W., et al., 2007. Servo design of a vertical axis drive using dual linear motors for high speed electric discharge machining. Int. J. Mach. Tools Manuf., 47(3–4):546–554. [doi:10.1016/j.ijmachtools.2006.05.011]
Jang, J.S., Kim, Y.B., Lee, I.Y., et al., 2004. Design of a synchronous position controller with a pneumatic cylinder driving system. SICE Annual Conf., p.2943–2947.
Koren, Y., 1980. Cross-coupled biaxial computer controls for manufacturing systems. J. Dynam. Syst. Meas. Contr., 102(4):265–272. [doi:10.1115/1.3149612]
Meng, D., Tao, G., Chen, J., et al., 2011. Modeling of a pneumatic system for high-accuracy position control. Proc. Int. Conf. on Fluid Power and Mechatronics, p.505–510. [doi:10.1109/FPM.2011.6045817]
Meng, D., Tao, G., Zhu, X., 2013. Integrated direct/indirect adaptive robust motion trajectory tracking control of pneumatic cylinders. Int. J. Contr., 86(9):1620–1633. [doi:10.1080/00207179.2013.792002]
Shan, J., Liu, H., Nowotny, S., 2005. Synchronized trajectory-tracking control multiple 3-DOF experimental helicopters. IEE Proc.-Contr. Theory Appl., 152(6):683–692. [doi:10.1049/ip-cta:20050008]
Shibata, S., Yamamoto, T., Jindai, M., 2006. A synchronous mutual position control for vertical pneumatic servo system. JSME Int. J. Ser. C, 49(1):197–204. [doi:10.1299/jsmec.49.197]
Su, Y., Sun, D., Ren, L., et al., 2006. Integration of saturated PI synchronous control and PD feedback for control of parallel manipulators. IEEE Trans. Robot., 22(1):202–207. [doi:10.1109/TRO.2005.858852]
Sun, D., 2003. Position synchronization of multiple motion axis with adaptive coupling control. Automatica, 39(6): 997–1005. [doi:10.1016/S0005-1098(03)00037-2]
Sun, D., Mills, K., 2002. Adaptive synchronized control of coordination of multi-robot assembly tasks. IEEE Trans. Robot. Autom., 18(4):498–510. [doi:10.1109/TRA.2002.802229]
Sun, D., Lu, R., Mills, J.K., et al., 2006. Synchronous tracking control of parallel manipulators using cross-coupling approach. Int. J. Robot. Res., 25(11):1137–1147. [doi:10.1177/0278364906072037]
Sun, D., Shao, X., Feng, G., 2007. A model-free cross-coupled control for position synchronization of multi-axis motions: theory and experiments. IEEE Trans. Contr. Syst. Technol., 15(2):306–314. [doi:10.1109/TCST.2006.883201]
Sun, D., Wang, C., Feng, G., 2009. A synchronization approach to trajectory tracking of multiple mobile robots while maintaining time-varying formations. IEEE Trans. Robot., 25(5):1074–1086. [doi:10.1109/TRO.2009.2027384]
Xiao, Y., Zhu, K., 2006. Optimal synchronization control of high-performance motion systems. IEEE Trans. Ind. Electron., 53(4):1160–1169. [doi:10.1109/TIE.2006.878317]
Xiao, Y., Zhu, K., Liaw, H., 2005. Generalized synchroni-zation control of multi-axis motion systems. Contr. Eng. Pract., 13(7):809–819. [doi:10.1016/j.conengprac.2004.09.005]
Zhu, X., Cao, J., Tao, G., et al., 2009. Synchronization strategy research of pneumatic servo system based on separate control of meter-in and meter-out. IEEE/ASME Int. Conf. on Advanced Intelligent Mechatronics, p.24–29. [doi:10.1109/AIM.2009.5230043]
Author information
Authors and Affiliations
Corresponding author
Additional information
Project supported by the Fundamental Research Funds for the Central Universities, China (No. 2014QNA40) and the Natural Science Foundation of Jiangsu Province, China (No. BK20140188)
Rights and permissions
About this article
Cite this article
Meng, Dy., Tao, Gl., Li, Am. et al. Motion synchronization of dual-cylinder pneumatic servo systems with integration of adaptive robust control and cross-coupling approach. J. Zhejiang Univ. - Sci. C 15, 651–663 (2014). https://doi.org/10.1631/jzus.C1300360
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1631/jzus.C1300360