Abstract
The purpose of this study was to build a flexible mechanical system with a hydrostatic skeleton. The main components of this system are two type flexible bags. One is a structural bag with constant inner pressure. The other is an actuator bag with controlled inner pressure. To design the system, it was necessary to estimate both structural deformation and driving force. Numerical analysis of flexible bags, however, is difficult because of large nonlinear deformation. This study analyzed structural strength and driving force of flexible bags with the nonlinear finite element analysis (FEA) software ABAQUS. The stress concentration dependency on the bag shape is described and the driving force is calculated to include the large deformation. From the analytical results, this study derives an empirical equation of driving force. The validity of the equation was confirmed by condition-changed analyses and experimental results.
Similar content being viewed by others
References
Hayakawa, Y., Pandian, S.R., 2005. Development of a Hybrid Element by using Sponge Core Soft Rubber Actuator. IEEE International Conference on Robotics and Automation, p.538–543. [doi:10.1109/ROBOT.2005.1570174]
Kimura, H., Kajimura, F., Maruyama, D., Koseki, M., Inou, N., 2006. Flexible Hermetically-sealed Mobile Robot for Narrow Spaces Using Hydrostatic Skeleton Driving Mechanism. IEEE/RSJ International Conference on Intelligent Robot and Systems, p.4006–4011. [doi:10.1109/IROS.2006.281840]
Kozulin, A.A., Skripnyak, V.A., 2004. Strength Calculation of Polymer Pipeline Elements. The 8th Russian-Korean International Symposium on Science and Technology KORUS, p.29–32. [doi:10.1109/KORUS.2004.1555661]
Ogden, R.W., 1972. Large deformation isotropic elasticity—on the correlation of theory and experiment for incompressible rubberlike solids. The Royal Society of London, Series A, Mathematical and Physical Sciences, 326:565–584.
Ogden, R.W., 1997. Non-linear Elastic Deformations. Dover Publications, New York.
Pamplona, D.C., Goncalves, P.B., Lopes, S.R.X., 2006. Finite deformations of cylindrical membrane under internal pressure. Journal of Mechanical Sciences, 48:683–696.
Suzumori, K., Abe, T., 1993. Applying a Flexible Microactuators to Pipeline Inspection Robots. International Symposium on Robotics and Manufacturing System IMACS/SICE, p.515–520.
Suzumori, K., Maeda, T., Watanabe, H., Hisada, T., 1997. Fiberless flexible microactuator designed by finiteelement method. IEEE/ASME Transactions on Mechatronics, 2(4):281–286. [doi:10.1109/3516.653052]
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Maruyama, D., Kimura, H., Koseki, M. et al. Driving force and structural strength evaluation of a flexible mechanical system with a hydrostatic skeleton. J. Zhejiang Univ. Sci. A 11, 255–262 (2010). https://doi.org/10.1631/jzus.A000030
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1631/jzus.A000030