Visible ITO Pattern in Capacitive Touch Lens: Cause and Countermeasure


Market demand for touch panel/lens has been exceptionally high for the recent years due to smartphones, tablet PCs, etc. Among the available technologies to envision touch functionality, capacitive touch screen has received the great attention due to the various superiorities over the competing ones. Capacitive touch screen features two transparent conductive electrodes, such as ITO (indium tin oxide). However, the difference in refractive indices of ITO, substrate, and air, ITO pattern is clearly visible if there is no proper countermeasure. Most of touch screen makers and ITO substrate supplier utilize “index-matching technology” to prevent this phenomenon.

Even though of the attempts to minimize visible ITO pattern in final product, there are many technical and process challenges. In this study, the causes around visible ITO pattern were investigated to understand and provide the proper countermeasures.

One of the possible causes for visible ITO pattern was improper annealing process in ITO especially for film substrate. According to XPS (X-ray photoelectron spectroscopy)/ESCA (electron spectroscopy for chemical analysis) and other analysis results, ITO, which is normally deposited through sputtering, is not fully transformed to oxidized state. After aligning and adjusting annealing condition, acknowledged visible ITO pattern was disappeared.

Other causes for visible patterns were also discussed in detail, and the relevant countermeasures were provided.

This is a preview of subscription content, access via your institution.


  1. 1.

    Touch screens in mobile devices to deliver $5 billion next year, Press release, ABI Research, 2008-09-10.

  2. 2.

    D. M. Usher, C. Ilett, Displays, Vol. 7 No. 2, 59–66, 1986.

    Article  Google Scholar 

  3. 3.

    J. Colegrove, Info. Display, Vol. 26 No. 3, 22–24, 2010.

    Article  Google Scholar 

  4. 4.

    X. Yan, F. W. Mon, D. J. Poxson, M. F. Schubert, J. K. Kim, J. Cho, E. F. Schubert, Japanese J. Appl. Phys., Vol. 48, 120203, 2009.

    Article  Google Scholar 

  5. 5.

    A. G. Michette, Z. Wang, Opt. Comm., Vol. 177 No. 1–6, 47-55, 2000.

    CAS  Article  Google Scholar 

  6. 6.

    T. Uchida, M. Wakana, T. Satoh, Proceeding of ICCE-17 (International Conference on Composite/Nano Engineering), 2009.

  7. 7.

    P. A. Bertrand, J. Vac . Sci. Technol., Vol. 18 No. 1, 28–33, 1981.

    CAS  Google Scholar 

  8. 8.

    L. Kerkache, A. Layadi, D. Dogheche, D. Remiens, J. Phys. D: Appl. Phys., Vol. 39 No. 1, 184, 2006

    CAS  Article  Google Scholar 

Download references

Author information



Corresponding author

Correspondence to Duk Su Kim.

Rights and permissions

Reprints and Permissions

About this article

Cite this article

Su Kim, D., Lee, GG., Yang, J. et al. Visible ITO Pattern in Capacitive Touch Lens: Cause and Countermeasure. MRS Online Proceedings Library 1315, 301 (2011).

Download citation