Erratum

The Original Article is available

The Original Article is available

The Original Article is available

The Original Article is available

The Original Article is available

The Original Article is available

Single versus successive pop-in modes in nanoindentation tests of single crystals – ERRATUM

Yuzhi Xia, Yanfei Gao, George M. Pharr, and Hongbin Bei

doi: https://doi.org/10.1557/jmr.2016.193, Published by Materials Research Society with Cambridge University Press, 24 May 2016

Study of phase separation in an InGaN alloy by electron energy loss spectroscopy in an aberration corrected monochromated scanning transmission electron microscope – ERRATUM

Thomas Walther, Xiaoyi Wang, Veerendra C. Angadi, Pierre Ruterana, Paolo Longo, and Toshihiro Aoki

doi: https://doi.org/10.1557/jmr.2016.447, Published by Materials Research Society with Cambridge University Press, 8 December 2016

Length-dependent melting behavior of Sn nanowires – ERRATUM

Qiyue Yin, Fan Gao, Jirui Wang, Zhiyong Gu, Eric A. Stach, and Guangwen Zhou

doi: https://doi.org/10.1557/jmr.2017.45, Published by Materials Research Society with Cambridge University Press, 21 February 2017

Determination of the strain-rate sensitivity of ultrafine-grained materials by spherical nanoindentation – ERRATUM

Patrick Feldner, Benoit Merle, and Mathias Göken

doi: https://doi.org/10.1557/jmr.2017.69, Published by Materials Research Society with Cambridge University Press, 6 March 2017

Fluorographene: Synthesis and sensing applications – ERRATUM

Tharangattu N. Narayanan, Ravi K. Biroju, and Venkatesan Renugopalakrishnan

doi: https://doi.org/10.1557/jmr.2017.135, Published by Materials Research Society with Cambridge University Press, 20 April 2017

Electromagnetic interference shielding and mechanical properties of Si 3 N 4 –SiOC composites fabricated by 3D-printing combined with polymer infiltration and pyrolysis – ERRATUM

Wenyan Duan, Zhe Fan, Hui Wang, Jingyi Zhang, Tianlu Qiao, and Xiaowei Yin

doi: https://doi.org/10.1557/jmr.2017.150, Published by Materials Research Society with Cambridge University Press, 2 May 2017

References

  1. 1.

    Y. Xia, Y. Gao, G.M. Pharr, and H. Bei: Single versus successive pop-in modes in nanoindentation tests of single crystals. J Mater. Res. 31 (14), 2065–2075 (2016). doi: https://doi.org/10.1557/jmr.2016.193.

    CAS  Article  Google Scholar 

  2. 2.

    T. Walther, X. Wang, V.C. Angadi, P. Ruterna, P. Longo, and T. Aoki: Study of phase separation in an InGaN alloy by electron energy loss spectroscopy in an aberration corrected monochromated scanning transmission electron microscope. J Mater. Res. 32 (5), 983–995 (2017). doi: https://doi.org/10.1557/jmr.2016.447.

    CAS  Article  Google Scholar 

  3. 3.

    Q. Yin, F. Gao, J. Wang, Z. Gu, E.A. Stach, and G. Zhou: Length-dependent melting behavior of Sn nanowires. J Mater. Res. 32 (6), 1194–1202 (2017). doi: https://doi.org/10.1557/jmr.2017.45.

    CAS  Article  Google Scholar 

  4. 4.

    P. Feldner, B. Merle, and M. Göken: Determination of the strain-rate sensitivity of ultrafine-grained materials by spherical nanoindentation. J Mater. Res. 32 (8), 1466–1473 (2017). doi: https://doi.org/10.1557/jmr.2017.69.

    CAS  Article  Google Scholar 

  5. 5.

    T.N. Narayanan, R.K. Biroju, and V. Renugopalakrishnan: Fluorographene: Synthesis and sensing applications. J Mater. Res. (2017). doi: https://doi.org/10.1557/jmr.2017.135.

    Google Scholar 

  6. 6.

    W. Duan, Z. Fan, H. Wang, J. Zhang, T. Qiao, and X. Yin: Electromagnetic interference shielding and mechanical properties of Si3N4–SiOC composites fabricated by 3D-printing combined with polymer infiltration and pyrolysis. J Mater. Res. (2017). doi: https://doi.org/10.1557/jmr.2017.150.

    Google Scholar 

Download references

Authors

Additional information

The online version of the original article can be found at https://doi.org/10.1557/jmr.2016.193, https://doi.org/10.1557/jmr.2016.447, https://doi.org/10.1557/jmr.2017.45, https://doi.org/10.1557/jmr.2017.69, https://doi.org/10.1557/jmr.2017.135, and https://doi.org/10.1557/jmr.2017.150

Rights and permissions

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Xia, Y., Gao, Y., Pharr, G.M. et al. Erratum. Journal of Materials Research 32, 2447–2448 (2017). https://doi.org/10.1557/jmr.2017.245

Download citation