Processing, microstructure and mechanical properties of Al-based metal matrix composites reinforced with mechanically alloyed particles — ERRATUM
A.K. Chaubey, S. Scudino, N.K. Mukhopadhyay, and J. Eckert
doi: https://doi.org/10.1557/jmr.2016.156, Published by Materials Research Society with Cambridge University Press, 19 April 2016.
Thermal oxidation behavior of glass-forming Ti–Zr–(Nb)–Si alloys — ERRATUM
Somayeh Abdi, Matthias Bönisch, Steffen Oswald, Mohsen Samadi Khoshkhoo, Wolfgang Gruner, Martina Lorenzetti, Ulrike Wolff, Mariana Calin, Jürgen Eckert, and Annett Gebert
doi: https://doi.org/10.1557/jmr.2016.122, Published by Materials Research Society with Cambridge University Press, 15 April 2016.
In Chaubey et al.1 and Abdi et al.2, there should have been a footnote for co-author Jürgen Eckert as follows:
This author was an editor of this journal during the review and decision stage. For the JMR policy on review and publication of manuscripts authored by editors, please refer to http://www.mrs.org/jmr-editor-manuscripts/.
Cambridge regrets these attribution errors, and the originals have since been corrected.
References
A.K. Chaubey, S. Scudino, N.K. Mukhopadhyay, and J. Eckert. Processing, microstructure and mechanical properties of Al-based metal matrix composites reinforced with mechanically alloyed particles. J Mater. Res. 31 (9), 1229–1236 (2016).
S. Abdi, M. Bönisch, S. Oswald, M.S. Khoshkhoo, W. Gruner, M. Lorenzetti, U. Wolff, M. Calin, J. Eckert, and A. Gebert. Thermal oxidation behavior of glass-forming Ti–Zr–(Nb)–Si alloys J Mater. Res. 31 (9), 1264–1274 (2016).
Additional information
The original article can be found online at https://doi.org/10.1557/jmr.2016.156
Rights and permissions
About this article
Cite this article
Chaubey, A., Scudino, S., Mukhopadhyay, N. et al. Erratum to: Processing, microstructure and mechanical properties of Al-based metal matrix composites reinforced with mechanically alloyed particles. Journal of Materials Research 31, 1372 (2016). https://doi.org/10.1557/jmr.2016.192
Published:
Issue Date:
DOI: https://doi.org/10.1557/jmr.2016.192