Erratum to: Microstructure design for fast oxygen conduction

The Original Article is available

The Original Article is available

Microstructure design for fast oxygen conduction – ERRATUM

Dilpuneet S. Aidhy and William J. Weber

doi: 10.1557/jmr.2015.327, Published by Materials Research Society with Cambridge University Press, 11 November 2015.

Processing of Al–12Si–TNM composites by selective laser melting and evaluation of compressive and wear properties – ERRATUM

Konda G. Prashanth, Sergio Scudino, Anil K. Chaubey, Lukas Löber, Pei Wang, Hooyar Attar, Frank P. Schimansky, Florian Pyczak, and Jürgen Eckert.

doi: 10.1557/jmr.2015.326, Published by Materials Research Society with Cambridge University Press, 12 November 2015.

In Aidhy,1 there should have been a footnote for co-author William Weber as follows:

This author was an editor of this journal during the review and decision stage. For the JMR policy on review and publication of manuscripts authored by editors, please refer to http://www.mrs.org/jmr-editor-manuscripts/.

In Prashanth,2 there should have been a footnote for co-author Jürgen Eckert as follows:

This author was an editor of this journal during the review and decision stage. For the JMR policy on review and publication of manuscripts authored by editors, please refer to http://www.mrs.org/jmr-editor-manuscripts/.

The editors regret these attribution errors, and the originals have since been corrected.

References

  1. 1.

    D. A. Aidhy and J. W. Weber. Microstructure design for fast oxygen conduction. J Mater. Res. 31(1), 2–16 (2016).

    CAS  Article  Google Scholar 

  2. 2.

    K. G. Prashanth, S. Scudino, A. K. Chaubey, L. Löber, P. Wang, H. Attar, F. P. Schimansky, F. Pyczak, and J. Eckert. Processing of Al–12Si–TNM composites by selective laser melting and evaluation of compressive and wear properties. J Mater. Res. 31(1), 55–65 (2016).

    CAS  Article  Google Scholar 

Download references

Authors

Additional information

The original article can be found online at https://doi.org/10.1557/jmr.2015.327

Rights and permissions

Reprints and Permissions

About this article

Verify currency and authenticity via CrossMark

Cite this article

Aidhy, D.S., Weber, W.J., Prashanth, K.G. et al. Erratum to: Microstructure design for fast oxygen conduction. Journal of Materials Research 31, 173 (2016). https://doi.org/10.1557/jmr.2016.15

Download citation