Erratum: “Representative strain of indentation analysis” [J. Mater. Res. 20, 2225 (2005)] and “Limit analysis-based approach to determine the material plastic properties with conical indentation” [J. Mater. Res. 21, 947 (2006)]

The Original Article is available

The Original Article is available

References

  1. 1.

    N. Ogasawara, N. Chiba, X. Chen: Representative strain of indentation analysis. J. Mater. Res. 20, 2225 (2005).

    CAS  Article  Google Scholar 

  2. 2.

    N. Ogasawara, N. Chiba, X. Chen: Limit analysis-based approach to determine the material plastic properties with conical indentation. J. Mater. Res. 21, 947 (2006).

    CAS  Article  Google Scholar 

  3. 3.

    Y. Cao, N. Huber: Further investigation on the definition of the representative strain in conical indentation. J. Mater. Res. 21, 1810 (2006).

    CAS  Article  Google Scholar 

  4. 4.

    N. Ogasawara, N. Chiba, M. Zhao, X. Chen: Comments on “Further investigation on the definition of the representative strain in conical indentation” by Y. Cao and N. Huber [J. Mater. Res. 21, 1810, (2006)], J. Mater. Res. (2006) (submitted).

    Google Scholar 

  5. 5.

    N. Ogasawara, N. Chiba, M. Zhao, X. Chen: Determine material plastic and elastic properties with optimized representative strain-based indentation technique. J. Mech. Mater. Struct. (2006) (submitted).

    Google Scholar 

Download references

Author information

Affiliations

Authors

Corresponding author

Correspondence to Xi Chen.

Additional information

The online version of the original article can be found at https://doi.org/10.1557/JMR.2005.0280 and https://doi.org/10.1557/jmr.2006.0108

Rights and permissions

Reprints and Permissions

About this article

Cite this article

Ogasawara, N., Chiba, N. & Chen, X. Erratum: “Representative strain of indentation analysis” [J. Mater. Res. 20, 2225 (2005)] and “Limit analysis-based approach to determine the material plastic properties with conical indentation” [J. Mater. Res. 21, 947 (2006)]. Journal of Materials Research 21, 2699–2670 (2006). https://doi.org/10.1557/jmr.2006.0319

Download citation