Article PDF
Avoid common mistakes on your manuscript.
References
N. Ogasawara, N. Chiba, X. Chen: Representative strain of indentation analysis. J. Mater. Res. 20, 2225 (2005).
N. Ogasawara, N. Chiba, X. Chen: Limit analysis-based approach to determine the material plastic properties with conical indentation. J. Mater. Res. 21, 947 (2006).
Y. Cao, N. Huber: Further investigation on the definition of the representative strain in conical indentation. J. Mater. Res. 21, 1810 (2006).
N. Ogasawara, N. Chiba, M. Zhao, X. Chen: Comments on “Further investigation on the definition of the representative strain in conical indentation” by Y. Cao and N. Huber [J. Mater. Res. 21, 1810, (2006)], J. Mater. Res. (2006) (submitted).
N. Ogasawara, N. Chiba, M. Zhao, X. Chen: Determine material plastic and elastic properties with optimized representative strain-based indentation technique. J. Mech. Mater. Struct. (2006) (submitted).
Author information
Authors and Affiliations
Corresponding author
Additional information
The online version of the original article can be found at https://doi.org/10.1557/JMR.2005.0280 and https://doi.org/10.1557/jmr.2006.0108
Rights and permissions
About this article
Cite this article
Ogasawara, N., Chiba, N. & Chen, X. Erratum: “Representative strain of indentation analysis” [J. Mater. Res. 20, 2225 (2005)] and “Limit analysis-based approach to determine the material plastic properties with conical indentation” [J. Mater. Res. 21, 947 (2006)]. Journal of Materials Research 21, 2699–2670 (2006). https://doi.org/10.1557/jmr.2006.0319
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1557/jmr.2006.0319