Preparation and Hydrogen Pumping Characteristics of BaCe0.8Y0.2O3−δ Thin Film

Abstract

Thin films of BaCe0.8Y0.2O3−δ (BCY) were prepared by colloidal spray deposition. Dense, crack-free BCY films having a grain size of 2–7 µm were successfully deposited on NiO/BCY substrates. Electrochemical hydrogen pumping with the BCY films showed that the maximum current density increased with temperature. The maximum current density was sensitive to the moisture in the cathode gas; the value obtained with a dry cathode gas was only half that with a wet cathode gas. A very high hydrogen-pumping current density of 3.4 A/cm2 was measured at 700°C with an applied voltage of 1.5 V.

This is a preview of subscription content, access via your institution.

References

  1. 1.

    H. Iwahara, H. Uchida, and S. Tanaka, Solid State Ionics 9–10 (1983) 1021.

    Article  Google Scholar 

  2. 2.

    T. Schober, Solid State Ionics 139 (2001) 95.

    Article  CAS  Google Scholar 

  3. 3.

    H. Matumoto, S. Hamajima, and H. Iwahara, Solid State Ionics 145 (2001) 25.

    Article  Google Scholar 

  4. 4.

    J. Eschenbaum, J. Rosenberger, R. Hempelmann, D. Nagengast, and A. Weidinger, Solid State Ionics 77 (1995) 222.

    Article  CAS  Google Scholar 

  5. 5.

    I. Kosacki and H. U. Anderson, Solid State Ionics 97 (1997) 429.

    Article  CAS  Google Scholar 

  6. 6.

    S. Hamakawa, L. Li, A. Li, and E. Iglesia, Solid State Ionics 148 (2002) 71.

    Article  CAS  Google Scholar 

  7. 7.

    V. Agarwal and M. Liu, J. Electrochem. Soc. 143 [10] (1996) 3239.

    Article  CAS  Google Scholar 

  8. 8.

    A. Pham, T. H. Lee, and R. S. Glass, Proc. 6th Int. Symp. on Solid Oxide Fuel Cells. The Electrochemical Society, PV 99–19 (1999) 172.

    Google Scholar 

  9. 9.

    A. Pham, R. Glass, T. H. Lee, U.S. Patent No. 6, 358, 567 (2002).

  10. 10.

    U. Balachandran, T. H. Lee, S. Wang, G. Zhang, and S. E. Dorris, Proceedings of the 27th International Conference on Coal Utilization and Fuel Systems, Gaithersburg, MD, Coal Technology Association, Vol. 27, p.1155, 2002.

    Google Scholar 

  11. 11.

    T. H. Lee, S. E. Dorris, and U. Balachandran, submitted for publication to Solid State Ionics.

  12. 12.

    N. Bonanos, Solid State Ionics 53–56 (1992) 967.

    Article  Google Scholar 

  13. 13.

    T. He, K. -D. Kreuer, Yu. M. Baikov, and J. Maier, Solid State Ionics 95 (1997) 301.

    Article  CAS  Google Scholar 

  14. 14.

    Unpublished results.

  15. 15.

    H. Iwahara, Solid State Ionics 77 (1995) 289.

    Article  CAS  Google Scholar 

  16. 16.

    J. Guan, S. E. Dorris, U. Balachandran, and M. Liu, J. Electrochem. Soc. 145 (1998) 1780.

    Article  CAS  Google Scholar 

  17. 17.

    H. Iwahara, T. Esaka, H. Uchida, T. Yamauchi, and K. Ogaki, Solid State Ionics 18/19 (1986) 1003.

    Article  Google Scholar 

Download references

Acknowledgments

This work is supported by U.S. Department of Energy, National Energy Technology Laboratory’s Gasification Technologies Program, under Contract W-31-109-Eng-38.

Author information

Affiliations

Authors

Corresponding author

Correspondence to T. H. Lee.

Rights and permissions

Reprints and Permissions

About this article

Cite this article

Lee, T.H., Harder, B.J., Zuo, C. et al. Preparation and Hydrogen Pumping Characteristics of BaCe0.8Y0.2O3−δ Thin Film. MRS Online Proceedings Library 835, K1.5 (2004). https://doi.org/10.1557/PROC-835-K1.5

Download citation