Abstract
Bi-2212 precursor films were deposited on both sides of polycrystalline Ag tapes by electrodeposition. After a melt-solidification process in flowing oxygen atmosphere, c-axis textured Bi-2212 films with Jc( 0T, 4.2K) up to 820,000 A/ cm2 were obtained. A post annealing in flowing nitrogen at 475°C for 25 minutes increased Tc from 72 K to 92 K, and Jc(H=0T) > 17, 000A/ cm2 was observed at 60 K. No scaling behavior of the pinning force was observed, indicating more than one pinning mechanism in thus obtained Bi-2212/Ag tapes.
This is a preview of subscription content, access via your institution.
References
- [1]
K. Heine et al., Appl. Phys. Lett. 55 (1989) 2441.
- [2]
J. Kase et al., Jpn. J. Appl. 29 (1990) L1096.
- [3]
K. Togano et al., Adv. Cryo. Eng. Mat. 38 (1992)1081.
- [4]
G. Villard et al., IEEE Transaction on Applied Superconductivity 11(2001) 3039.
- [5]
H. Miao et al., Physica C 303 (1998)81.
- [6]
D.J. Zuraski, et al, J. Electrochem. Soc. 135 (1988) 1607.
- [7]
M. Maxfield et al., Appl. Phys. Lett. 54 (1989) 1932.
- [8]
R.N. Bhattacharya et al., Science and Technology of Thin Film Superconductors, 2 (1991) 243.
- [9]
R.N. Bhattacharya et al., Physica C 211 (1993) 475.
- [10]
R.N. Bhattacharya et al., Physica C 333 (2000) 59.
- [11]
E.E. Hellstrom et al., Physica B 216 (1996) 252.
- [12]
M.R. Koblischika, Physica C 282-287 (1997) 2193.
Author information
Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Chen, J., Bhattachary, R., Padmanabhanl, R. et al. Preparation of Bi-2212/Ag Tapes by Electrodeposition. MRS Online Proceedings Library 689, 45 (2001). https://doi.org/10.1557/PROC-689-E4.5
Published: