In 1993 SKB launched its Encapsulation Plant Project. Within this project, SKB has:
designed a facility for encapsulation of nuclear fuel
laid down the design premises for a canister for disposal of nuclear fuel
tested and developed fabrication methods for copper canisters
evaluated the long term chemical and mechanical behaviour of the canister
made preliminary plans for a factory for the production of copper canister
constructed a canister laboratory for full scale testing of the key operations in an encapsulation plant.
The conclusions of this project were that a canister consisting of an outer layer of 50 mm copper over an insert of cast nodular iron would provide sufficient corrosion protection and would have sufficient mechanical strength. This canister can be produced by several methods such as forming from rolled plates, hot extrusion, and pierce and draw. These methods have been tested at full scale and the results from these manufacturing tests will be presented and discussed. The canister will be sealed by electron beam welding in the encapsulation plant and the integrity of the weld will be verified by ultrasonic testing and high-energy radiography. The final development work in this area will be performed in the Canister Laboratory in Oskarshamn, Sweden. The laboratory is now in operation and is equipped with a 100 kW EB-welding unit, a 9 MV digital X-ray unit and a state-of-the-art phased array ultrasonic testing unit.
L.O. Werme, “Design premises for canister for spent nuclear fuel”, Technical Report TR-98-08, 1998, Swedish Nuclear Fuel and Waste Management Co. (SKB).
B. Beverskog and I. Puigdomènech, “SITE-94. Revised Pourbaix diagrams for copper at 5-150°C”, SKI Report 95: 73, 1995, Swedish Nuclear Power Inspectorate.
The Swedish Corrosion Institute and its reference group, “Copper as canister material for unreprocessed nuclear waste - evaluation with respect to corrosion”, KBS Technical Report 90, 1978, Swedish Nuclear Fuel and Waste Management Co. (SKB).
The Swedish Corrosion Institute and its reference group, “Corrosion resistance of a copper canister for nuclear fuel”, SKBF/KBS Technical Report 83-26, 1983, Swedish Nuclear Fuel and Waste Management Co. (SKB).
L. Werme, P. Sellin and N. Kjellbert, “Copper canisters for nuclear high level waste disposal. Corrosion aspects”, SKB Technical report 92-26, 1992, Swedish Nuclear Fuel and Waste Management Co. (SKB).
P. Wersin, K. Spahiu and J. Bruno, “Kinetic modelling of bentonite-canister interaction. Long-term predictions of copper canister corrosion under oxic and anoxic conditions”, SKB Technical Report 94-25, 1994, Swedish Nuclear Fuel and Waste Management Co. (SKB).
K.R. Nightingale, A. Sanderson, C. Punshon, L.O. Werme, “Advances in EB Technology for the Fabrication and Sealing of Large Scale Copper Canisters for High Level Nuclear Waste Burial”, 6th International Conference on Welding and Melting by Electron and laser Beams, CISFFEL 6, 1998, Vol. 1, pp. 323–330.
P. Wu, T. Stepinski, “Inspection of copper canisters for spent nuclear fuel by means of Ultrasonic array System. Modelling, defect detection and grain noise estimation”, SKB Technical Report TR-99-12, 1999, Swedish Nuclear Fuel and Waste Management Co. (SKB).
C-G. Andersson, R.E. Andrews, “Fabrication of Containment Canisters for Nuclear Waste by Friction Stir Welding”, presented at the “1st International Symposium on Friction Stir Welding”, held at the Rockwell Science Center, Thousand Oaks, California, 14-16 June 1999. The Proceedings are available as a CD-ROM from TWI, Cambridge, UK.
About this article
Cite this article
Werme, L.O. Fabrication and Testing of Copper Canister for Long-Term Isolation of Spent Nuclear Fuel. MRS Online Proceedings Library 608, 77 (1999). https://doi.org/10.1557/PROC-608-77