Abstract
Measurement of the dependence of emission capacitance transients on filling pulse duration has been extended to devices with Ohmic back contacts. Capacitance transients on devices possessing identical bulk 20-ppm P doped a-Si:H but either Ohmic contacts or blocking contacts were compared. The devices with blocking contacts completely reproduced in quantitative detail the previously observed anomalous dependence of capacitance transients on filling pulse duration. The diodes with Ohmic contacts showed no evidence of the anomalous filling pulse effect even for light-degraded, resistive samples. Current injection measurements show that blocking contacts delay the charge injection into the device by about 10–100 msec.
Similar content being viewed by others
References
J. D. Cohen, T. M. Leen, and R. Rasmussen, Phys. Rev. Lett. 69, 3358 (1992).
J. D. Cohen, T. M. Leen, F. Zhong, and R. J. Rasmussen, Mat. Res. Soc. Symp. Proc. 297, 183 (1993)
U. W. Pachen, D. Kwon, and J. D. Cohen, Mat. Res. Soc. Symp. Proc. 336, 455 (1994).
M. W. Carlen, Y. Xu, and R. S. Crandall, Phys. Rev. B51, 2173 (1995).
H. M. Branz and E. A. Schiff, Phys. Rev. B48, 8667 (1993).
J. D. Cohen, D. V. Lang, and J. P. Harbison, Phys. Rev. Lett. 45, 197 (1980).
W. B. Jackson and N. M. Johnson, (in press).
N. M. Johnson and W. B. Jackson, J. Non-Cryst. Solids 68, 147 (1984).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Jackson, W.B., Johnson, N.M. & Walker, J. Effect of Contacts on Capacitance Transient Measurements in N-Type Hydrogenated Amorphous Silicon. MRS Online Proceedings Library 377, 233–238 (1995). https://doi.org/10.1557/PROC-377-233
Published:
Issue Date:
DOI: https://doi.org/10.1557/PROC-377-233