Abstract
Blends of polybenzimidazole (PBI) with either of two fluorine-containing polyimides were prepared by casting from solution and by precipitation. Dynamic mechanical thermal analysis (DMTA) and differential scanning calorimetry (DSC) were used to study miscibility in the two blend systems.
The blends of PBI with the first polyimide, the polysulfonimide Pl-1, consisted of a single phase when the blends contained less than 30 wt% Pl-1; above 50 wt% Pl-1, phase separation occurred even at room temperature. The PBI blends containing the second polyimide, Pl-2, were immiscible.
Similar content being viewed by others
References
L. Leung, D. J. Williams, F. E. Karasz and W. J. MacKnight, Polym. Bull. 16, 457 (1986).
S. Choe, W. J. MacKnight and F. E. Karasz, in Polyimides: Materials Chemistry and Characterization ed. C. Feger, M. M. Khojasteh and J. E. McGrath (Elsevier, Amsterdam 1989).
S. Choe, W. J. MacKnight and F. E. Karasz, in Multiphase Macromolecular Systems ed. B. M. Culbertson (Plenum, New York, 1989).
P. Musto, F. E. Karasz and W. J. MacKnight, Polymer 30, 1012 (1989).
T. G. Fox, Bull. Am. Phys. Soc. 1, 123 (1956).
H. Vogel and C. S. Marvel, J. Polym. Sci. 50, 511 (1961).
J. K. Gilham, Science 495, 1257 (1963).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Yamaoka, H., Aubrey, N.E., MAcknight, W.J. et al. Miscibiuty in Blends of Polybenzimidazole and Fluorine Containing Polyimides. MRS Online Proceedings Library 171, 197–202 (1989). https://doi.org/10.1557/PROC-171-197
Published:
Issue Date:
DOI: https://doi.org/10.1557/PROC-171-197