Abstract
In a recent MRS symposium, the effect of boron on grain boundary hardness (GBH) in Ni3Al was reported. Addition of 0.2 at.% of boron decreased the GBH in all three sets of alloys tested (24, 25, and 26 at.% Al). The present paper summarizes the study of the effect of boron on hardness within grains. Boron-induced softening was again observed in grain interiors. However, it occurred only in alloys with 24 and 25 at.% Al, but not in the alloy with 26 at.% Al. An explanation for this behavior is presented.
Similar content being viewed by others
References
C. T. Liu, C. L. White and J. A. Horton, Acta Metall. 33, 213 (1985).
S. C. Huang, A. I. Taub and K. M. Chang, Acta Metall. 32, 1703 (1984).
I. Baker, B. Huang and E. M. Schulson, Acta Metall. 36, 493 (1988).
E. M. Schulson, T. P. Weihs, I. Baker and H. J. Frost, Acta Metall. 34, 1395 (1986).
X. R. Qian and Y. T. Chou, Materials Lett. 6, 157 (1988), Scripta Metall. 22, 725 (1988).
X. R. Qian and Y. T. Chou, Proc. of the MRS Symposium on Interfacial Structure, Properties, and Design, M. H. Yoo, C. L. Brlant and W. A. T. Clark, eds., Materials Society, Press, Pittsburgh, 1988.
E. Pink and R. J. Arsenault, Progr. Mater. Sci. 24, 1 (1979).
R. W. Guard and J. H. Westbrook, Trans. AIME 215, 807 (1959).
D. P. Pope and S. S. Ezz. Int. Metall. Rev. 29, 136 (1984).
J. J. Gilman, J. Appl. Phys. 36, 3195 (1965).
M. H. Yoo, in Proc. of the MRS Symposium on High Temperature Ordered Intermetallic Alloys II, N. S. Stoloff, C. C. Koch, C. T. Liu and O. Izumi, eds., Materials Society Press, Pittsburgh, 1987, p. 207
B. W. Christ. Acta Metall. 17, 17 (1969).
Y. Nakada and A. S. Keh, Acta Metall. 16, 903 (1968).
A. Dasqupta, L. C. Smedskjaer, D. G. Legniki and R. W. Siegel, Mater. Lett. 3, 457 (1985).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Qian, X.R., Chou, Y.T. The Effect of Boron on Microhardness in Ni3 Al Polycrystals. MRS Online Proceedings Library 133, 529 (1988). https://doi.org/10.1557/PROC-133-529
Published:
DOI: https://doi.org/10.1557/PROC-133-529