Abstract
The various “building blocks” of a computational mechanics approach to plain and steel fibre reinforced concrete (SFRC) are briefly discussed. Experimental data are incorporated, as well. Theory and experiments deal with debond-ing as the leading mechanism of structural loosening.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
P. Stroeven, PhD thesis, Delft University of Technology, 1973.
H.W. Reinhardt, P. Stroeven, J.A. den Uijl, T.R. Kooistra and J.H.A.M. Vrencken, Betonw. Fertt. Techn. 44, 498 (1978).
P. Stroeven in Mechanical Behaviour of Materials, edited by K.J. Miller and R.F. Smith (Pergamon Press, Toronto, 1979), pp. 141–150.
P. Stroeven in Fracture Mechanics of Fibre Reinforced Cement–Based Composites, edited by P. Stroeven (Proc. Symp. Delft, 1970), pp.C1–C45.
P. Stroeven in Proc. Third Conf. Safety of Bridge Structures (Wroclaw, 1987) (in print).
S.D. Wicksel, Biom. 17, 84 (1925).
J.C. Lenain and A.R. Bunsell, J. Mater. Sci. 14, 321 (1979).
P. Stroeven, Mater. Constr. 12 (67), 9 (1979).
P. Stroeven, J. Microsc. 111 (pt 3), 283 (1977).
P. Stroeven in Proc. Sec. Eur. Conf. NDT (Austrian Soc. of NDT, Vienna, 1981), pp. 169–171.
P. Stroeven and R. Babut, Heron. 31 (2), 15 (1986).
P. Stroeven and R. Babut in Proc. Fourth Eur. Symp. Stereol., edited by B. Karlsson, R. Warren and J. Wasén (Chalmers Univ. Göteborg, 1987)
P. Stroeven and R. Babut in Brittle Matrix Composites, edited by A.M. Brandt and I.H. Marshall (Elsevier Appl. Sci. Publ., London, 1986).
P. Stroeven, Composites, 13 (4), 129 (1982).
P. Stroeven, S.P. Shah, Y.M. de Haan and C. Bouter in Proc RILEM Symp. Testing and Test Methods of Fibre Cement Composites (The Construction Press, Lancaster, 1978), pp. 345–353.
S.P. Shah, P. Stroeven. D. Dalhuisen and P. van Stekelenburg in Proc. RILEM Symp. Testing and Test Methods of Fibre Cement Composites (The Construction Press, Lancaster, 1978), pp. 399–408.
J. Aveston, G.A. Cooper and A. Kelly in Proc. Conf. Nat. Phys. Lab (IPC Science and Technology Press, 1971), pp. 15–24.
A.M. Brandt, Report Stevin Laboratory, 1985
P. Stroeven and G. de Wind in Bond in Concrete, edited by P. Bartos (Applied Science Publishers, London, 1982), pp. 40–50.
P. Stroeven, R.J. van Staveren and G. de Wind in Proc. Int. Kolloq. uber das Festigkeits– und Verformungsverhalten von Beton (Dresden, 1979), pp. 303–324.
Anonymus, Recommandations for approval, supply and acceptance of steels for prestressing tendons (RILEM-FIP-CEB, 1974).
J. Bień, Report 1–86–9 Stevin Laboratory, 1986.
P. Stroeven and J. Bien in Proc Int. Conf. Measurement of Static and Dynamic Parameters of Structures and Materials (IMEKO, Plzen, 1967), pp. 519–524.
H.G. Poulos and E.H. Davis, Pile Foundation Analysis and Design (J Wiley, New York, 1980), p. 71.
J. Bień and S. Grady, Report 1–86–12 Stevin Laboratory, 1986.
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Stroeven, P. Bond-Based Computational Mechanics Approach to Plain and Fibre Reinforced Concrete. MRS Online Proceedings Library 114, 233 (1987). https://doi.org/10.1557/PROC-114-233
Published:
DOI: https://doi.org/10.1557/PROC-114-233