Process and Material Requirements for Successful Heterogonous Passive Component Integration in RF System

Abstract

Applications using rf radios operating at frequencies above 1GHz are proliferating. The highest operating frequencies continue to increase and applications above 10GHz and up to 77GHz are already emerging. Systems become more complex and devices need to operate at several different frequency bands using different wireless standards. The rf-front end sections of these devices are characterized by a high diversity of components, in particular high precision passive components. In order to be produced cost-effectively, these elements need to be integrated along with the semiconductor devices. This paper describes the requirements for successful integration of rf-passive devices and proposes multilayer thin film technology as an effective rf-integration technology.

This is a preview of subscription content, access via your institution.

References

  1. 1.

    E.Beyne, R.Van Hoof, A.Achen, “The use of BCB and Photo-BCB Dielectrics for High Speed Digital and Microwave applications”, Proceedings of the 1995 International Conference on Multichip Modules, Denver, Colorado, April 19–21, 1995; pp.513–518.

  2. 2.

    Ph.Pieters, S.Brebels, E.Beyne, “Integrated Microwave filters in MCM-D”, Proceedings IEEE-MultiChip Module Conference MCMC-96, Santa Cruz, California, February 6–7, 1996.

  3. 3.

    G.Carchon, K.Vaesen, S. Brebels, W. De Raedt, E. Beyne, B. Nauwelaers, “Multilayer thin-film MCM-D for the integration of high- performance RF and microwave circuits”, IEEE Trans. Components and Packaging Technologies, Vol. 24: (3), 2001, pp.510–519..

    Article  Google Scholar 

  4. 4

    P.Soussan, L.Goux, M.Dehan, H.V.Meeren, G. Potoms, D. Wouters, E.Beyne, “Low Temperature Technology Options for Integrated Hight Density Capacitors”, Proceedings of the 2006 ECTC conference, May 30 – June 2, 2006, pp.515–519.

  5. 5.

    S.F.Mahmoud, E.Beyne, “Inductance and quality-factor evaluation of planar lumped inductors in a multilayer configuration”, IEEE Transactions on Microwave Theory and Techniques, Vol.45, 6, June 1997, pp.918 – 923.

    Article  Google Scholar 

  6. 6

    W.Ruythooren, E. Beyne, J.-P. Celis, J. De Boeck, “Integrated high-frequency inductors using amorphous electrodeposited Co-P core”, IEEE Transactions on Magnetics, Vol.38, 5, Sept. 2002, pp.3498 – 3500.

    CAS  Article  Google Scholar 

  7. 7.

    P.Pieters, K.Vaesen, S.Brebels, S.Mahmoud, W. De Raedt, E.Beyne, R.Mertens, “Accurate modelling of high Q-inductors in thin-film multilayer technology for wireless telecommunication applications”, IEEE trans. MMT-S, Vol. 49, (4), pp. 489–599, 2001.

    Google Scholar 

  8. 8.

    D.Schieber, “On the inductance of printed spiral coils”, Archiv für Elektrotechnik, 68, 1985, pp. 155–159.

    Article  Google Scholar 

  9. 9.

    G.Carchon, et. al. “High-Q RF Inductors on Standard Silicon Realised using Wafer-level Packaging Techniques”, MMTS conference, Philadelphia, June 9–12 2003.

  10. 10.

    X.Sun, O.Dupuis, D.Linten, G.Carchon, P.Soussan, S.Decoutere, E.Beyne, “High-Q above-IC inductors using thin film wafer-level packaging , demonstrated on 90nm rf-CMOS 5 GHz VCO and 24 GHz LNA”, IEEE transactions on advanced Packaging technology, part B, Vol.29, 4, nov 2006, pp.810–817.

    CAS  Article  Google Scholar 

Download references

Author information

Affiliations

Authors

Corresponding author

Correspondence to Eric Beyne.

Rights and permissions

Reprints and Permissions

About this article

Cite this article

Beyne, E., De Raedt, W., Carchon, G. et al. Process and Material Requirements for Successful Heterogonous Passive Component Integration in RF System. MRS Online Proceedings Library 969, 102 (2006). https://doi.org/10.1557/PROC-0969-W02-02-V01-02

Download citation