Abstract
Amorphous niobium oxide (Nb2O5) nano-tubes were fabricated inside anodic alumina templates using atomic layer deposition (ALD). The nanoporous templates were in-house fabricated anodic alumina membranes having an inter-pore distance of about 100 nm with pores lengths of 2 µm. The pores were parallel and well ordered in a hexagonal pattern. Atomic layer deposition was performed using gas pulses of niobium iodide (NbI5) and oxygen separated by purging pulses of argon. By employing long gas pulses (30 s) it was possible to get coherent and amorphous Nb2O5 films conformally covering the pore-walls of the alumina template. The outer diameter of the nano-tubes was tailored between 40 and 80 nm by using alumina templates with different pore sizes. By using template membranes with pores not opened in the bottom, nano-tubes with one side closed could be fabricated. Free-standing, and still parallel, nano-tubes could be obtained by selectively etching away the alumina template using phosphoric acid. Using the above mentioned procedure it was possible to fabricate unsurpassed parallel niobium oxide nano-tubes of equal length, diameter and wall-thickness, ordered in a perfect hexagonal pattern. The samples were analysed using high resolution scanning electron microscopy (HR-SEM), transmission electron microscopy (TEM), electron diffraction and x-ray fluorescence spectroscopy (XRFS).
Similar content being viewed by others
References
S. Iijima, Nature 354, 56 (1991)
M. Remškar and A. Mrzel, Vacuum 71, 177 (2003)
L. Qu, Q. Shi, X. Wu and B. Fan, Adv. Mater. 16, 1200 (2004)
A. Johansson, E. Widenkvist, J. Lu, M. Boman and U. Jansson, Nano Lett. 5, 1603 (2005)
G. S. Wu, Y. Lin, X. Y. Yuan, T. Xie, B. C. Cheng and L. D. Zhang, Nanotechnology 15, 568 (2004)
H. Shin, D. K. Jeong, J. Lee, M. M. Sung and J. Kim, Adv. Mater 16, 1197 (2004)
N. Özer, M. D. Rubin and C. M. Lampert, Sol. Energy Mater. Sol. Cells 40, 285 (1996)
T. Ushikubo, Catal. Today, 57, 331 (2000)
G. Barkhordarian, T. Klassen and R. Bormann, Scripta Mater. 49, 213 (2003)
J. Shirakashi, K. Matsumoto, N. Miura and M. Konagai, Jpn. J. Appl. Phys. 36, L1120 (1997)
J. J. Van Glabbeek and R. E. Van de Leest, Thin Solid Films 201, 137 (1991)
C. M. Lampert, Sol. Energy Mater. 11, 1 (1984)
D. Rosenfeld, P. E.Schmid, S. Szeles, F. Levy, V. Demarne and A. Grisel, Sens. Actuators B 37, 83 (1996)
B. Hunsche, M. Vergöhl, H. Neuhäuser, F. Klose, B. Szyszka and T. Matthee, Thin Solid Films 392, 184 (2001)
Z. -W. Fu, J. -J. Kong and Q. -Z. Qin, J. Electrochem. Soc. 146, 3914 (1999)
R. Romero, J. R. Ramos-Barrado, F. Martin and D. Leinen, Surf. Interface Anal. 36, 888 (2004)
M. Schmitt, S. Heusing, M. A. Aegerter, A. Pawlicka and C. Avellaneda, Sol. Energy Mater. Sol. Cells 54, 9 (1998)
S. -C. Jung, N. Imaishi and H. -C. Park, Jpn. J. Appl. Phys. 34, L775 (1995)
P. A. Williams, A. G. Jones, P. J. Wright, M. J. Crosbie, J. F. Bickley, A. Steiner, H. O. Davies and T. J. Leedham, Chem. Vap. Deposition 8, 110 (2002)
K. Kukli, M. Ritala, M. Leskelä and R. Lappalainen, Chem. Vap. Deposition 4, 29 (2002)
M. Rooth, K. Kukli and A. Hårsta, in EUROCVD 15, Proc. Vol. 2005–09, Eds.: A. Devi, R. Fischer, H. Parala, M. Allendorf and M. Hitchman (The Electrochem. Soc., Pennington, N. J. 2005) p. 598.
H. Masuda and K. Fukuda, Science 268, 1466 (1995)
J. Sundqvist, A. Hårsta, J. Aarik, K. Kukli and A. Aidla, Thin Solid Films 427, 147 (2003)
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Rooth, M., Johansson, A., Boman, M. et al. Ordered and parallel niobium oxide nano-tubes fabricated using Atomic Layer Deposition in anodic alumina templates. MRS Online Proceedings Library 901, 405 (2005). https://doi.org/10.1557/PROC-0901-Ra24-05
Received:
Accepted:
Published:
DOI: https://doi.org/10.1557/PROC-0901-Ra24-05