Effect of Cu addition on interfacial reactions between Sn-9Zn lead-free solder and Ni substrate

Abstract

This study investigates interfacial reactions of (Sn–9Zn) + xCu/Ni systems. Ni5Zn21, Cu5Zn8, (Ni,Zn,Cu)3Sn4, (Cu,Ni,Zn)6Sn5, and Cu6Sn5 phases were formed on the Sn–9Zn/Ni interface at 240–270 °C, when 0–10 wt% Cu was added to the Sn–9Zn solder. Experimental results indicate that changing the concentration of Cu in the Sn–9Zn solder dramatically changes the formation of intermetallic compounds (IMCs) in the (Sn–9Zn) + xCu/Ni system. Different diffusion and segregation rates of elements are the main reasons for a change in the IMC evolution.

This is a preview of subscription content, access via your institution.

FIG. 1
FIG. 2
FIG. 3
FIG. 4
FIG. 5
TABLE I.
FIG. 6

References

  1. 1

    K. Suganuma K. Niihara: Wetting and interface microstructure between Sn–Zn binary alloys and Cu. J. Mater. Res. 13, 2859 1998

    CAS  Article  Google Scholar 

  2. 2

    C.W. Huang K.L. Lin: Interfacial reactions of lead-free Sn-Zn based solders on Cu and Cu plated electroless Ni–P/Au layer under aging at 150 °C. J. Mater. Res. 19, 3560 2004

    CAS  Article  Google Scholar 

  3. 3

    J.M. Song, P.C. Liu, C.L. Shih K.L. Lin: Role of Ag in the formation of interfacial intermetallic phases in Sn–Zn soldering. J. Electron. Mater. 34, 1249 2005

    CAS  Article  Google Scholar 

  4. 4

    K. Suganuma, T. Murata, H. Noguchi Y. Toyoda: Heat resistance of Sn–9Zn solder/Cu interface with or without coating. J. Mater. Res. 15, 884 2000

    CAS  Article  Google Scholar 

  5. 5

    K.S. Kim, J.M. Yang, C.H. Yu, I.O. Jung H.H. Kim: Analysis on interfacial reactions between Sn–Zn solders and the Au/Ni electrolytic-plated Cu pad. J. Alloy. Compd. 379, 314 2004

    CAS  Article  Google Scholar 

  6. 6

    D.Q. Yu, H.P. Xie L. Wang: Investigation of interfacial microstructure and wetting property of newly developed Sn–Zn–Cu solders with Cu substrate. J. Alloy. Compd. 385, 119 2004

    CAS  Article  Google Scholar 

  7. 7

    C.Y. Chou, S.W. Chen Y.S. Chang: Interfacial reactions in the Sn–9Zn–(xCu)/Cu and Sn–9Zn–(xCu)/Ni couples. J. Mater. Res. 21, 1849 2006

    CAS  Article  Google Scholar 

  8. 8

    Y.W. Yen, C.C. Jao C. Lee: Effect of Cu addition on interfacial reaction between Sn-9Zn solder and Ag J. Mater. Res. 21, 2986 2006

    CAS  Article  Google Scholar 

  9. 9

    W.C. Luo, C.E. Ho, J.Y. Tsai, Y.L. Liu C.R. Kao: Solid-state reactions between Ni and Sn–Ag–Cu solders with different Cu concentrations. J. Mater. Sci. Eng., A 396, 385 2005

    Article  Google Scholar 

  10. 10

    C.E. Ho, Y.W. Lin, S.C. Yang, C.R. Kao D.S. Jinang: Effects of limited Cu supply on soldering reactions between SnAgCu and Ni. J. Electron. Mater. 35, 1017 2006

    CAS  Article  Google Scholar 

  11. 11

    H. Okamoto: Binary Phase Diagram ASM International Materials Park, OH 1990

    Google Scholar 

  12. 12

    B.F. Dyson, T.R. Anthony D. Turnbull: Interstitial diffusion of copper in tin. J. Appl. Phys. 38, 1479 1967

    Article  Google Scholar 

Download references

Author information

Affiliations

Authors

Corresponding author

Correspondence to Yee-wen Yen.

Rights and permissions

Reprints and Permissions

About this article

Cite this article

Yen, Yw., Liou, Wk. Effect of Cu addition on interfacial reactions between Sn-9Zn lead-free solder and Ni substrate. Journal of Materials Research 22, 2663–2667 (2007). https://doi.org/10.1557/JMR.2007.0339

Download citation