Erratum to: “Deformation and failure of a film/substrate system subjected to spherical indentation: Part II. Prediction of failure modes in a thin TiN film deposited on a compliant elastic substrate” [J. Mater. Res. 21, 783 (2006)]

The Original Article is available

With reference to the above mentioned article [J. Mater Res. 21, 783 (2006)], we would like to correct two equations and a reference:

1. In the subsection “Criterion for inclined crack initiation” under the section “Analysis”(page 785, column 2, line 15), the corrected equation should be read as:

The square root in the term (2/πl)1/2 is missing in the current article.

2. In the subsection “Criterion for bending crack” (page 786, column 1, line 12), the corrected equation should be read as:

The square root is missing in the term (2/πl)1/2, as in the earlier case.

3. The reference numbered 12 should be corrected as D.J. Green: An Introduction to the Mechanical Properties of Ceramics (Cambridge University Press, Cambridge, UK, 1998), p. 241.

Author information

Affiliations

Authors

Corresponding author

Correspondence to V. Jayaram.

Additional information

The online version of the original article can be found under http://dx.doi.org/10.1557/JMR.2006.0095e

Rights and permissions

Reprints and Permissions

About this article

Cite this article

Math, S., Jayaram, V. & Biswas, S. Erratum to: “Deformation and failure of a film/substrate system subjected to spherical indentation: Part II. Prediction of failure modes in a thin TiN film deposited on a compliant elastic substrate” [J. Mater. Res. 21, 783 (2006)]. Journal of Materials Research 23, 1185 (2008). https://doi.org/10.1557/JMR.2006.0095e

Download citation