Abstract
In this work, the effect of a sol-gel ZrO2–3 mol% Y2O3 thin film on the fracture properties of a variety of brittle substrates was investigated. The results suggest that the film does not have any appreciable influence on the fracture behavior of crystalline substrates but dramatically affects the fracture properties of amorphous layers. In particular, a significant reduction of average fracture strength and a major increase of the Weibull modulus were observed on coated glassy slides. The origin of such variations is attributed to the generation of a homogeneous flaw population in the vitreous substrates, and the possible mechanisms for the production of flaws are analyzed. Implications of these results for the practical use of coated glassy layers are discussed.
Similar content being viewed by others
References
M. Shane and M.I. Mecartney: Sol-gel synthesis of zirconia barrier coatings. J. Mater. Sci. 25, 1537 (1990).
Q. Zhang, X. Li, J. Shen, G. Wu, J. Wang, and L. Chen: ZrO2 thin films and ZrO2/SiO2 optical reflection filter deposited by sol-gel method. Mater. Lett. 45, 311 (2000).
A. Baraldi, R. Capelletti, M. Casalboni, C. Mora, M. Pavesi, R. Pizzoferrato, P. Prosposito, and F. Sarcinelli: Effects of composition and catalyst on the optical properties of ZrO2-based Ormosil films. J. Non-Cryst. Solids 317, 231 (2003).
D.R. Uhlmann, T. Suratwala, K. Davidson, J.M. Boulton, and G. Teowee: Sol-gel derived coatings on glass. J. Non-Cryst. Solids 218, 113 (1997).
C.J. Brinker and G.W. Scherer: Sol-Gel Science, The Physics and Chemistry of Sol-Gel Processing (Academic Press, San Diego, CA, 1989).
J.D. Wright and N.A.J.M. Sommerdijk: Sol-Gel Materials Chemistry and Applications (Taylor and Francis, London, U.K., 2001).
R. Caruso, A. Díaz-Parralejo, P. Miranda, and F. Guiberteau: Controlled preparation and characterization of multilayer sol-gel zirconia dip-coatings. J. Mater. Res. 16, 2391 (2001).
A. Díaz-Parralejo, R. Caruso, A.L. Ortiz, and F. Guiberteau: Densification and porosity evaluation of ZrO2–3 mol% Y2O3 sol-gel thin films. Thin Solid Films 458, 92 (2004).
M. Boulouz, A. Boulouz, A. Giani, and A. Boyer: Influence of substrate temperature and target composition on the properties of yttria-stabilized zirconia thin films grown by r.f. reactive magneto sputtering. Thin Solid Films 323, 85 (1998).
E. Sanchez-González, P. Miranda, A. Diaz-Parralejo, A. Pajares, and F. Guiberteau: Effect of sol-gel thin coatings on the fracture strength of glass. J. Mater. Res. 19, 896 (2004).
B.D. Fabes and D.R. Uhlmann: Strengthening of glass by sol-gel coatings. J. Am. Ceram. Soc. 73, 978 (1990).
F.H. Wang, R.J. Hand, B. Ellis, and A.B. Seddon: Glass strengthening using epoxy coatings. Phys. Chem. Glasses 36, 201 (1995).
H-W. Kim, Y. Deng, P. Miranda, A. Pajares, D.K. Kim, H-E. Kim, and B.R. Lawn: Effect of flaw state on the strength of brittle coatings on soft substrates. J. Am. Ceram. Soc. 84, 2377 (2001).
J.G.R. Kingston and R.J. Hand: Strengthening mechanism of epoxy based coatings on glass. Phys. Chem. Glasses 41, 1 (2000).
P. Miranda, A. Pajares, F. Guiberteau, F.L. Cumbrera, and B.R. Lawn: Role of flaw statistics in contact fracture of brittle coatings. Acta Mater. 49, 3719 (2001).
C-S. Lee, D.K. Kim, J. Sánchez, P. Miranda, A. Pajares, and B.R. Lawn: Rate effects in critical loads for radial cracking in ceramic coatings. J. Am. Ceram. Soc. 85, 2019 (2002).
R. Swanepoel: Determination of the thickness and optical constants of amorphous silicon. J. Phys. E: Sci. Instrum. 16, 1214 (1983).
H. Chai, B.R. Lawn, and S. Wuttiphan: Fracture modes in brittle coatings with large interlayer modulus mismatch. J. Mater. Res. 14, 3805 (1999).
Y-W. Rhee, H-W. Kim, Y. Deng, and B.R. Lawn: Contactinduced damage in ceramic on compliant substrates: fracture mechanics and design. J. Am. Ceram. Soc. 84, 1066 (2001).
B.R. Lawn, K.S. Lee, H. Chai, A. Pajares, D.K. Kim, S. Wuttiphan, I.M. Peterson, and X. Hu: Damage-resistant brittle coatings. Adv. Eng. Mater. 2, 745 (2000).
P. Miranda, A. Pajares, F. Guiberteau, F.L. Cumbrera, and B.R. Lawn: Contact fracture of brittle bilayer coatings on soft substrates. J. Mater. Res. 16, 115 (2001).
W.J. Weibull: A statistical distribution function of wide applicability. Appl. Mech. 18, 293 (1951).
B.R. Lawn: Fracture of Brittle Solids (Cambridge University Press, Cambridge, U.K., 1998), p. 338.
M.F. Gruninger, B.R. Lawn, E.N. Farabaugh, and J.B. Wachtman: Measurement of residual stresses in coatings on brittle substrates by indentation fracture. J. Am. Ceram. Soc. 70, 344 (1987).
T-J. Chuang and S. Lee: Elastic flexure of bilayered beams subject to strain differentials. J. Mater. Res. 15, 2780 (2000).
B.R. Lawn: Fracture of Brittle Solids (Cambridge University Press, Cambridge, U.K., 1998), p. 307.
B. Yu, K. Liang, and S. Gu: Effect of ZrO2 on crystallization of CaO–P2O5–SiO2 glasses. Ceram. Int. 28, 695 (2002).
K.J. Hong, J.M. Kim, and H.S. Kim: Microstructure and properties of CaO–ZrO2–SiO2 glass–ceramics prepared by sintering. J. Eur. Ceram. Soc. 23, 2193 (2003).
L. Höglund and J. Ågren: Analysis of the Kirkendall effect, marker migration and pore formation. Acta Mater. 49, 1311 (2001).
H. Strandlund and H. Larsson: Prediction of Kirkendall shift and porosity in binary and ternary diffusion couples. Acta Mater. 52, 4695 (2004).
E.O. Kirkendall: Diffusion of zinc in alpha brass. Trans. AIME 147, 104 (1942).
A.D. Smigelskas and E.O. Kirkendall: Zinc diffusion in alpha brass. Trans. AIME 171, 130 (1947).
Author information
Authors and Affiliations
Rights and permissions
About this article
Cite this article
Sánchez-González, E., Miranda, P., Díaz-Parralejo, A. et al. Influence of zirconia sol-gel coatings on the fracture strength of brittle materials. Journal of Materials Research 20, 1544–1550 (2005). https://doi.org/10.1557/JMR.2005.0191
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1557/JMR.2005.0191