Abstract
The microstructure of three kinds of porous carbon–carbon preforms prepared for carbon–carbon/aluminum composites was identified by x-ray diffraction, Raman spectroscopy, and field emission scan electronic microscope. Although manufactured at same processing conditions, including the temperature, type of organic gas, and pressure of pyrolysis, the structure of the pyrolytic carbon (Cpy) in three kinds of preforms is different. The morphology of the Cpy is influence by the topology of the preforms greatly, and the crystal structure of the Cpy is influenced by the crystal structure of the carbon fiber greatly, on which surface the Cpy was deposited. The degree of graphitization of the Cpy had been enhanced and the structure of the Cpy changed to more anisotropic form when the preforms were annealed at 2773 K.
Similar content being viewed by others
References
J.C. Bokros: in Chemistry and Physics of Carbon, Vol. 5, edited by P.L. Walker (Dekker, New York, 1968), pp. 1–118.
W. Benzinger and K.J. Hüttinger: Chemical vapour infiltration of pyrocarbon: I. Some kinetic considerations. Carbon 34, 1465 (1996).
W. Benzinger and K.J. Hüttinger: Chemical vapor infiltration of pyrocarbon—II. The influence of increasing methane partial pressure at constant total pressure on infiltration rate and degree of pore filling. Carbon 36, 1033 (1998).
W. Benzinger and K.J. Hüttinger: Chemical vapor infiltration of pyrocarbon—III: The influence of increasing methane partial pressure at increasing total pressure on infiltration rate and degree of pore filling. Carbon 37, 181 (1999).
W. Benzinger and K.J. Hüttinger: Chemistry and kinetics of chemical vapor infiltration of pyrocarbon—V. Infiltration of carbon fiber felt. Carbon 37, 941 (1999).
W. Benzinger and K.J. Hüttinger: Chemistry and kinetics of chemical vapor infiltration of pyrocarbon–VI. Mechanical and structural properties of infiltrated carbon fiber felt. Carbon 37, 1311 (1999).
P. Delhaes: Chemical vapor deposition and infiltration processes of carbon materials. Carbon 40, 641 (2002).
W.G. Zhang, Z.J. Hu, and K.J. Hüttinger: Chemical vapor infiltration of carbon fiber felt: Optimization of densification and carbon microstructure. Carbon 40, 2529 (2002).
G.L. Dong and K.J. Hüttinger: Consideration of reaction mechanisms leading to pyrolytic carbon of different textures. Carbon 40, 2515 (2002).
J.W. Jeffrey, Methods in X-ray Crystallography (Academic Press, London, U.K., 1971), p. 83.
F.A. Quli, P.A. Thrower, and L.R. Radovic: Effects of the substrate on deposit structure and reactivity in the chemical vapor deposition of carbon. Carbon 36, 1623 (1998).
O. Feron, F. Langlais, R. Naslain, and J. Thebault: On kinetic and microstructural transitions in the CVD of pyrocarbon from propane. Carbon 37, 1343 (1999).
A.G. Evans and F.W. Zok: Physics and mechanics of fibrereinforced brittle matrix composites. J. Mater. Sci. 29, 3857 (1994).
M. Gu, H. Yang, W, Jiang, and G. Zhang: Study on the interfacial reaction product in Gr/Al composites. Adv. Compos. Mater. 5, 119 (1996).
B.T. Kelly: in Chemistry and Physics of Carbon, Vol. 5, edited by L.P. Walker (Dakker, New York, 1968), p. 119.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Liu, Z., Zhang, G., Sun, J. et al. Microstructure analysis of carbon–carbon preform. Journal of Materials Research 19, 2124–2130 (2004). https://doi.org/10.1557/JMR.2004.0271
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1557/JMR.2004.0271