References
Hobbacher A: 'Fatigue design of welded joints and compo-nents'. IIW doc. XIII-1539–96/XV-845–96, ISBN 1–85573–315–3.
Niemi E: 'Stress determination for fatigue analysis of welded components", IIS/IIW-1221–93, ISBN 1–85573–213–0.
Radaj D and Sonsino C.M: 'Fatigue assessment of welded joints by local approaches'. ISBN 1–85573–403–6.
Volvo Standard 5.501E, Welding manual, 1989.
Samuelsson J: 'Fatigue design of vehicle components: Meth-odology and applications'. Doctoral thesis, The Royal Institute of Technology Department of Aeronautical Structures and Materials, Stockholm, Report No. 88–23.
Samuelsson J: 'Fatigue evaluation of welded structures in con-struction equipment'. Symp. Performance of dynamically loaded welded structures, San Fransisco 1997.
Pettersson G. 'FE modelling and fatigue testing of welded construction machinery components'. Proc. Design and Analysis of Welded High Strength Steel Structures, Stockholm June 2002, ed. J Samuelsson, EMAS. ISBN 1–901537–34-X.
Samuelsson J: 'The effect of blasting before painting on fatigue strength in welded structures'. Swedish symposium on residual stresses, Sunne 30 March-2 April, 1987, ed. Ericsson T and Bergstrom J, 266–274
Barsoum R S: 'On the use of iso-parametric finite elements in linear fracture mechanics'. International Journal of Numerical Methods in Engineering 1976 10 {pp25–37}.
Henshell, R D and Shaw K G: 'Crack tip finite elements are unnecessary'. International Journal of Numerical Methods in Engineering 1975 9 {pp495–507}.
Anderson T L: Fracture Mechanics fundamentals and applications'. ISBN 0–8493–4260–0.
Suresh S: 'Fatigue of materials'. Cambridge University Press, USA, 1991, ISBN 0–521–43763–6.
Samuelsson J: 'Fatigue design and life-cycle cost considerations of construction equipment'. Symp. "DVM-TAG 1997 BATEIL '97 Wirtshaflichkeit und sicherheit, Berlin 1997.
Elber W: 'The significance of fatigue crack closure in fatigue'. ASTM STP 486 (1971).
Kumar R and Singh K: 'Influence of stress ratio on fatigue crack growth in mild steel'. Engineering Fracture Mechanics 1995 50(3) 377–384.
Maddox S et al: 'An investigation of the influence of applied stress ratio of fatigue crack propagation in structural steels'. Welding Institute Members, Report 72/1978/E.
Pettersson G: 'A study of fatigue life prediction methods on a welded construction machinery component'. Proc. Design and Analysis of Welded High Strength Steel Structures, Stockholm June 2002, ed. J Samuelsson, EMAS. ISBN 1–901537–34-X.
www.ansys.com
Martinsson J and Samuelsson J: 'Fatigue assessment of a welded component in a construction machinery based on different methods'. IIW doc, XII-1905–01.
ISO 898/1–1988.
Swedish building code: 'Regulations for steel structures (Swedish)'. 1987 ISBN 91–7332–328–4.
Fehl B D and Truman K Z: 'An evaluation of fracture mechanics quarter-point displacement techniques used for computing stress intensity factors'. Engineering Structures 1999 (3) 406–415.
Rights and permissions
About this article
Cite this article
Petterson, G. Various fatigue analysis methods of a welded component. Welding International 18, 364–373 (2004). https://doi.org/10.1533/wint.2004.3259
Issue Date:
DOI: https://doi.org/10.1533/wint.2004.3259