Advertisement

Welding International

, Volume 18, Issue 2, pp 103–111 | Cite as

Analytical study on the effects of welding deposition sequence on microstructure and hardness in beam-to-column welded connection of steel framed structures

  • M Mochizuki
  • Y Mikami
  • M Toyoda
Article
  • 15 Downloads

Keywords

Microstructure Welding Mechanical Engineer Analytical Study Offshore Engineer 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Bertero VV et al: ‘Performance of steel building structures during the Northridge Earthquake’. The Earthquake Research Center, University of California at Berkeley, Report No. UCB/EERC-94-09 (1994).Google Scholar
  2. 2.
    Toyoda M: ‘How steel structures fared in Japan's great earthquake’. Welding Journal 1995 74(12) 31–42.Google Scholar
  3. 3.
    Mochizuki M et al: ‘Residual stress reduction and fatigue strength improvement by controlling welding pass sequences’. Transactions of the American Society of Mechanical Engineers, Journal of Engineering Materials and Technology 2000 122(1) 108–112.Google Scholar
  4. 4.
    Mochizuki M et al: ‘Residual stress distribution depending on welding sequence in multi-pass welded joints with X-shaped groove’. Transactions of the American Society of Mechanical Engineers, Journal of Pressure Vessel Technology 2000 122(1) 27–32.Google Scholar
  5. 5.
    Mukai A et al: ‘Investigation on MAG wires for building structure’. Journal of Steel Construction Engineering 2000 7(26) 13–25.Google Scholar
  6. 6.
    Nakagomi T: ‘Control of interpass temperature in beam-to-column structures of steel frame structures’. Structural Technology 2001 14(5) 18–25.Google Scholar
  7. 7.
    Furuya H et al: ‘Newly proposed HAZ toughness evaluation method of structural steel for building and the result of evaluation by its application’. Journal of Steel Construction Engineering 2001 8(32) 17–31.Google Scholar
  8. 8.
    Okazawa T et al: ‘Study on influence of heat input and interpass temperature on the mechanical properties and the execution efficiency of weld joints in steel structures’. Journal of Steel Construction Engineering 2001 31(3) 1–10.Google Scholar
  9. 9.
    Mochizuki M and Toyoda M: ‘Effects of welding multiple heat cycles on joint performance in beam-to-column welded connection of steel framed structures -studies on relation between joint performance and welding heat cycles in welded joints (Report 1)’. Quarterly Journal of Japan Welding Society 2003 21(1) 46–53.Google Scholar
  10. 10.
    Architectural Institute of Japan, edited: Japanese Architectural Standard Specification (JASS 6) -Steel Work, 7th Edition. Architectural Institute of Japan, Tokyo, Japan 1996.Google Scholar
  11. 11.
    Leblond J B and Devaux J: ‘A new kinetic model for anisothermal metallurgical transformation in steels including effect of austenite grain size’. Acta Metallurgica 1984 32(1) 137–146.Google Scholar
  12. 12.
    Blondeau R et al: ‘Forecasting the hardness and resistance of carbon and low-alloy steels according to their structure and composition’. Les Méoires Scientifiques de la Revue de Métallurgie 1973 70(12) 883–892.Google Scholar
  13. 13.
    Blondeau R et al: ‘Forecasting the hardness, resistance and breaking point of carbon and low-alloy steels according to their composition and heat treatment’. Les Méoires Scientifiques de la Revue de Méallurgie 1975 72(11) 759–769.Google Scholar
  14. 14.
    SYSTUS International: SYSWELD 2000 Reference Manual SYSTUS International 2000.Google Scholar
  15. 15.
    Mochizuki M et al: ‘Welding residual stresses at the intersection of a small diameter pipe penetrating a thick plate’. Nuclear Engineering and Design 1993 144(3) 439–447.Google Scholar
  16. 16.
    Mochizuki M et al: ‘Numerical analysis of welding residual stress and its verification using neutron diffraction measurement’. Transactions of the American Society of Mechanical Engineers, Journal of Engineering Materials and Technology 2000 122(1) 98–103.Google Scholar
  17. 17.
    Mochizuki M et al: ‘Generation of thermal and residual stresses during welding heat cycles -Studies on residual stress in welded joints considering phase transformation effect (Report 1)’. Quarterly Journal of Japan Welding Society (to be published).Google Scholar
  18. 18.
    Satoh K et al: Welding Engineering Rikogaku-sha 1979 39–42.Google Scholar
  19. 19.
    Voss O et al: ‘Consideration of microstructural transformation in the calculation of residual stresses and distortion of larger weldments’. Mathematical Modelling of Weld Phenomena 4, IOM Communications, London 1998 584–596.Google Scholar
  20. 20.
    Karkhin V A et al: ‘Effect of low-temperature phase transformation on residual stress distributions in laser welded joints’. Mathematical Modelling of Weld Phenomena 5, IOM Communications, London 2001 597–614.Google Scholar

Copyright information

© Woodhead Publishing 2004

Authors and Affiliations

  • M Mochizuki
  • Y Mikami
  • M Toyoda

There are no affiliations available

Personalised recommendations