Welding International

, Volume 17, Issue 9, pp 677–683 | Cite as

Weldability of 13HMF steel after a period of prolonged service



Weldability Mechanical Engineer Offshore Engineer Prolonged Service 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.


Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.


  1. 1.
    Zeman M: ‘Investigation into the properties of joints welded in 13HMF steel after prolonged period of service (over 100,000 h).’ Research Report Ad 24/2001, Instytut Spawalnictwa (the Welding Institute).Google Scholar
  2. 2.
    Milinski P and Dobrzanski J: ‘Properties of Cr-Mo grade steel after prolonged period of serivice.’Google Scholar
  3. 3.
    Dobrzanski J and Milinski P: ‘Assessment of the degree of degradation of mechanical properties of a material after a prolonged period of service at elevated temperatures.’ IMZ Reports 2717/MJ/A and B/82/1999.Google Scholar
  4. 4.
    Hernas A: ‘Complex diagnostic investigations as the bases for the modernisation and extension of the safe service period of elements of the power boiler.'IEA Seminar ‘Investigation into the materials intended for power stations and power net-works.’ June 1995, Otwock-Swierk.Google Scholar
  5. 5.
    Nowak W: ‘Characteristics of 13HMF steel as a material for the manufacture of boilers and elements of turbines.’ Proc IV Conf ‘Welding in power industry: technology, equipment, investigations’. September 1994, Opole.Google Scholar
  6. 6.
    Lomozik M: ‘The effect of the welding thermal multi-cycles on the properties of joints welded in steels intended for working at elevated temperatures.’ PhD Thesis, Slask Polytechnic, 1998.Google Scholar
  7. 7.
    Ciesla M, et al: ‘Assessment of the conditions of power-engi-neering materials after prolonged periods of service’. Proc Conf ‘Problems in and innovations for the overhaul of power equipment.’ November 2001, Ladek Zdroj.Google Scholar
  8. 8.
    Zeman M: ‘An analysis of the scope of a problem and an indication of the direction for its future investigation, with practical examples of the use of mathematical methods for such purpose.’ Research Report C-31.3.4/1987, Instytut Spawalnictwa.Google Scholar
  9. 9.
    Mikula J: ‘Analytical methods for the assessment of weldability of steels.’ PdD Thesis, Krakow Polytechnic, Mechanika 2001(85).Google Scholar
  10. 10.
    Brozda J, Pilarczyk J and Zeman M: ‘CTP c –S welding dia-grams of transformations of austenite.’ Publ Wydawnictwo Slask, 1983.Google Scholar
  11. 11.
    Dobrazanski I: ‘An assessment of the state of the material intended for critical pressure elements of power boilers made of 123Cr–1Mo–V ferrite steel and working under the condi-tions of creep.’ Proc Conf ‘Investigations into the materials for power stations and power industry.’ Atomic Energy Institute, Zakopane, 2002.Google Scholar
  12. 12.
    Zeman M: ‘Properties of joints welded in 13HMF steel, after prolonged period of service.’ Ibid.Google Scholar

Copyright information

© Woodhead Publishing 2003

Authors and Affiliations

  • M Zeman

There are no affiliations available

Personalised recommendations