References
Sidorov A I: 'Reconditioning machine components by spray-ing and surfacing'. Publ Mashinostroenie Moscow 1987.
Shevchyenko O I etal: 'Examination of thermal cycles in surface hardening by surfacing'. In: 'Current methods of ther-mal, chemical-thermal treatment and surface hardening of components of machines and tools'. Publ Tashkent 1990 73.
Shevchenko O I etal: 'Relationship of the structure, phase composition and service properties of working layer of N73Kh16S3R3 rolls produced by plasma-powder servicing'. Chernaya Metallurgiya 1995 (8) 57.
Zashlyapin M Yu etal: 'Scientific fundamentals of recondi-tioning components by plasma-powder surfacing'. In: 'Tech-nology of repair of machines and mechanisms'. Publ Znanie Ukrainy Kiev 1994 15.
Oshchpkov Yu P and Oshchepkova N V: 'Special features of the structure formation in alloys of the Ni-Cr-B-C-Si system in induction surfacing'. Metallovedenie i Termicheskaya Obrabotka 1979 (10) 14.
Sbridzher A G: 'Structure and properties of coatings of self-fluxing alloys'. Metallovedenie i Termicheskaya Obrabotka 1987 (4) 42.
Pozdeev G A etal: 'Plasma surfacing of composite alloys based on Ni-Cr-B-Si alloys'. Svar Proiz 1988 (9) 7.
Kormacheva E S etal: 'Structure and properties of corrosion-and wear-resisting coatings produced by plasma surfacing with powders'. Svar Proiz 1987 (2) 4.
Bazhova T Yu and Shevchenko O I: 'Zone of crystallisation of Fe-Cr-C-B and Ni-Cr-C-B coatings in plasma-powder sur-facing'. In: 'Current aspects of metallurgy of production of metallic materials'. Publ Ural State University Ekaterinburg 1995 74.
Trekin G E etal: 'Examination of the structural zones of solidification of coatings in plasma spraying'. In: 'Current problems of welding science and technology'. Perm' State Technical University 1995 137.
Trekin G E etal: 'Formation and structure of coatings in two-layer plasma surfacing'. In: 'Current problems of welding science and technology'. Perm' State Technical University 1995 98.
Shevchenko O I etal: 'Structure and phase composition of N73Kh16S3R3 coating produced by plasma surfacing'. Chernaya Metallurgiya 1992 (10) 23.
Farber V M and Shevchenko O I: 'Effect of surfacing condi-tions on the structure of N73Kh16S3R3 deposited layer'. Publ Sverdlovsk Manuscript No 5850 deposited at Chermet-informatsiya 30.09.92.
Farber V M and Shevchenko O I: 'Structure of coatings of nickel self-fluxing alloys in plasma surfacing'. In: 'New mate-rials and resources-saving technologies of thermal and chemical-thermal treatment in engineering and metallurgy'. Novokuznetsk 1991 54.
Shevchenko O I etal: 'Effect of parameters of plasma surfac-ing on the phase composition and structure of N73Kh16S3R3 coating'. Publ Sverdlovsk Manuscript No 5919 deposited at Chermetinformatsiya 25.11.92.
Grekhova O I and Shevchenko O I: 'Special features of forma-tion of a dendritic structure in plasma coatings of the Ni-Cr-Si-B-C system'. In: 'The current aspects of metallurgy of pro-duction and treatment of metallic materials'. Publ Ural State Technical University Ekaterinburg 1995 76.
Shevchenko O I etal: 'Effect of high temperature heating on the structure of N73Kh16S3R3 coating produced by plasma-powder surfacing'. Chernaya Metallurgiya 1994 (10) 76.
Shevchenko O I etal: 'Structure and hardness of deposited coating of N73Kh16S3R3 alloy'. Publ Sverdlovsk Manuscript No 5918 deposited at Chermetinformatskii 25.11.92.
Trekin G E etal: 'Development of the optimal technology of plasma-powder surfacing of N73Kh16S3R3 alloy on the basis of examination of the structure and properties of coatings'. In: 'Technology of repair of machines and mechanisms'. Publ Znanie Ukrainy Kiev 1994 12.
Zashlyapin M Yu etal: 'Effect of the structure and phase composition of the service properties of the working layer of components in plasma-powder surfacing of N73Kh16S3R3 alloy'. In: 'Current state and prospects of reconditioning and hardening of machine components'. Publ Znanie Moscow 1994 84.
Trekin G E and Shevchenko O I: 'Mechanism of formation of cracks in deposition of alloys of the Ni-Cr-B-C-Si type'. In: 'The current aspects of metallurgy of production and treat-ment of metallic materials'. Publ Ural State Technical University Ekaterinburg 1995 73.
Shevchenko O I and Farber V M: 'Effect of parameters of surfacing nickel self-fluxing alloys on the wear resistance under thermal cycling'. In: 'The current aspects of metallurgy of production and treatment of metallic materials'. Publ Ural State Technical University Ekaterinburg 1995 75.
Gershenzon S M etal: 'Determination of the criterion of optimisation of the process of spraying nickel self-fluxing alloys'. In: 'Theory and practice of welding production'. Publ Ural Polytechnic Institute of Sverdlovsk 1986 87
Rights and permissions
About this article
Cite this article
Mazur, Z., Urquiza, G., Mariño, C. et al. Numerical prediction of heat affected zone (HAZ) grain refinement for multiple weld-bead deposits during the SMAW welding process of Cr–Mo–V steel. Welding International 17, 121–127 (2003). https://doi.org/10.1533/wint.2003.3054
Issue Date:
DOI: https://doi.org/10.1533/wint.2003.3054