Dynamic analysis of a planetary gear failure caused by tooth pitting and cracking
- 1.3k Downloads
Planetary gears are widely used in aeronautic and industrial applications that require compactness and high torque-to-weight ratios. Despite these advantages, the severe conditions under which such gears are typically used may lead to failure. Tooth pitting and cracking are frequently encountered failure modes. The defects are modeled and discussed for a planetary gear set. The influence of tooth defects on gear mesh stiffness is scrutinized. Healthy planetary gear dynamic response and the response of planetary gears containing tooth defects are compared in both the time and frequency domains and in the joint time-frequency domains by use of the Wigner-Ville distribution.
Keywordscrack dynamic response gear mesh stiffness pitting planetary gears Wigner-Ville distribution
Unable to display preview. Download preview PDF.
- 3.T. Hidaka, Y. Terauchi, and K. Dohi: “On the Relation Between the Run-Out Errors and the Motion of the Centre of Sun Gear in a Stoeckicht Planetary Gear,” Bull. Jpn. Soc. Mech. Eng., 1979, 22, pp. 748–54.Google Scholar
- 4.R. Kasuba and R. August: “Gear Mesh Stiffness and Load Sharing in Planetary Gearing,” ASME Paper 84-DET-229, ASME Fourth Power Transmission Conference (Cambridge, MA), 1984.Google Scholar
- 7.A. Saada and P. Velex: “An Extended Model for the Analysis of the Dynamics of Planetary Trains,” J. Mech. Des. (Trans. ASME), 1995, 117, pp. 241–47.Google Scholar
- 8.P. Velex and L. Flamand: “Dynamic Response of Planetary Trains to Mesh Parametric Excitations,” J. Mech. Des. (Trans. ASME), 1996, 118, pp. 7–14.Google Scholar
- 10.J. Lin and R.G. Parker: “Analytical Characterization of the Unique Properties of Planetary Gear Free Vibration,” ASME J. Vib. Acoust., 1999, 121, pp. 316–21.Google Scholar
- 11.P. Ma and M. Botman: “Load Sharing in a Planetary Gear Stage in the Presence of Gear Errors and Misalignment,” J. Mech. Trans. Auto. Des., 1984, 104, pp. 1–7.Google Scholar
- 12.Y.S. Shin and J.J. Jeon: “Pseudo Wigner-Ville Time Frequency Distribution and Its Application to Machinery Condition Monitoring,” J. Shock Vib., 1993, 1(1), pp. 65–76.Google Scholar
- 13.G. Touzot and G. Dhatt: Une Présentation de la Méthode des Eléments Finis, Editions Maloine, France, 1984.Google Scholar