Journal of Failure Analysis and Prevention

, Volume 5, Issue 5, pp 13–14 | Cite as

Material failure modes, part I: A brief tutorial on fracture, ductile failure, elastic deformation, creep, and fatigue

  • Benjamin D. Craig
Features Tutorial

Keywords

Fatigue Fatigue Crack Failure Mode Brittle Fracture Ductile Fracture 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

References

  1. 1.
    J.A. Collins and S.R. Daniewicz: “Failure Modes: Performance and Service Requirements for Metals,” M. Kutz, ed., Handbook of Materials Selection, John Wiley and Sons, 2002, pp. 705–73.Google Scholar
  2. 2.
    “Visual Examples of Various Structural Failure Modes,” Naval Postgraduate School, www.nps.navy.mil/avsafety/gouge/structures/structures.ppt.Google Scholar
  3. 3.
    “Ductile and Brittle Fractures,” Failure Analysis and Prevention, vol 11, ASM Handbook, ASM International, 1986, pp. 82–101.Google Scholar
  4. 4.
    Structural Alloys Handbook, vol 1, J.M. Holt, H. Mindlin, and C.Y. Ho, ed., CINDAS/Purdue University, 1997, p. 74.Google Scholar
  5. 5.
    J.P. Shaffer, A. Saxena, S.D. Antolovich, T.H. Sanders, Jr., and S.B. Warner: The Science and Design of Engineering Materials, 2nd ed., McGraw-Hill, 1999.Google Scholar
  6. 6.
    R.E. Hummel: Understanding Materials Science: History—Properties—Applications, Springer-Verlag, 1998.Google Scholar
  7. 7.
    “Failure of Gears,” Failure Analysis and Prevention, vol 11, ASM Handbook, ASM International, 1986, pp. 586–601.Google Scholar
  8. 8.
    Atlas of Fatigue Curves, H.E. Boyer, ed., ASM International, 1986.Google Scholar
  9. 9.
    J. Schijve: “Fatigue Crack Growth under Vaiable-Amplitude Loading,” Fatigue and Fracture, vol 19, ASM Handbook, ASM International, 1996, pp. 110–33.Google Scholar
  10. 10.
    S.J. Shaffer and W.A. Glaeser: “Fretting Fatigue,” Fatigue and Fracture, vol 19, ASM Handbook, ASM International, 1996, pp. 321–30.Google Scholar
  11. 11.
    “Wear Failures,” Failure Analysis and Prevention, vol 11, ASM Handbook, ASM International, 1986, pp. 145–62.Google Scholar
  12. 12.
    J.B. Conway: “Creep-Fatigue Interaction,” Mechanical Testing, vol 8, Metals Handbook, 9th ed., ASM International, 1986, pp. 346–60.Google Scholar
  13. 13.
    B.D. Craig: “Environmentally-Assisted Cracking: Comparing the Influence of Hydrogen, Stress, and Corrosion on Cracking Mechanisms,” AMPTIAC Quarterly, 2005, 9(1), pp. 17–24.Google Scholar

Copyright information

© ASM International 2005

Authors and Affiliations

  • Benjamin D. Craig
    • 1
  1. 1.Advanced Materials and Process Technology Information Analysis Center (AMPTIAC)Rome

Personalised recommendations