Journal of Thermal Spray Technology

, Volume 10, Issue 1, pp 147–182 | Cite as

Thermal spray processing of nanoscale materials II—Extended abstracts

  • C. C. Berndt
Article

Keywords

HVOF Thermal Barrier Coating Thermal Spray Technology Thermal Spray Technology Volume Spray Parameter 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

Bibliography

  1. 1.
    J. Karthikeyan, C.C. Berndt, J. Tikkanen, J.-Y. Wang, A.H. King, and H. Herman: Nanostr. Mater., 1997, vol. 8 (1), pp. 61–74.CrossRefGoogle Scholar
  2. 2.
    J. Karthikeyan, C.C. Berndt, T. Tikkanen, J.Y. Wang, A.H. King, and H. Herman: Nanostr. Mater., 1997, vol. 9, pp. 137–40.CrossRefGoogle Scholar
  3. 3.
    J. Tikkanen, K.A. Gross, J. Karthikeyan, V. Pitkanen, J. Keskinen, S. Raghu, M. Rajala, and C.C. Berndt: Surface Coatings Technol., 1997, vol. 90, pp. 210–16.CrossRefGoogle Scholar
  4. 4.
    J. Karthikeyan, C.C. Berndt, J. Tikkanen, S. Reddy, and H. Herman: Mater. Sci. Eng. A, 1997, vol. 238 (2), pp. 275–86.CrossRefGoogle Scholar
  5. 5.
    J. Karthikeyan, C.C. Berndt, S. Reddy, J.-Y. Wang, A.H. King, and H. Herman: J. Am. Ceram. Soc., 1998, vol. 81 (1), pp. 121–28.CrossRefGoogle Scholar
  6. 6.
    T. Chraska, A.H. King, and C.C. Berndt: Mater. Sci. Eng. A, 2000, vol. A286, pp. 169–78.Google Scholar

Bibliography

  1. 1.
    S.L. Chawla and R.K. Gupta: Material Selection for Corrosion Control, ASM International, Materials Park, OH, 1993.Google Scholar
  2. 2.
    J. Karthikeyan, C.C. Berndt, S. Reddy, J. Wang, A.H. King, and H. Herman: J. Am. Ceram. Soc., 1998, vol. 81 (1), pp. 121–28.CrossRefGoogle Scholar
  3. 3.
    J. Karthikeyan, C.C. Berndt, J. Tikkanen, J.Y. Wang, A.H. King, and H. Herman: Nanostr. Mater., 1997, vol. 8 (1), pp. 61–74.CrossRefGoogle Scholar
  4. 4.
    M. Gell: Mater. Sci. Eng., 1995, vol. A204, pp. 246–51.Google Scholar

References

  1. 1.
    H. Gleiter: Nanostr. Mater., 1992, vol. 1, pp. 1–19.CrossRefGoogle Scholar
  2. 2.
    J. Karthikeyan, C.C. Berndt, J. Tikkanen, S. Reddy, and H. Herman: MSE-A, 1997, vol. 238, pp. 275–86.CrossRefGoogle Scholar
  3. 3.
    J. Karthikeyan, C.C. Berndt, S. Reddy, J.-Y. Wang, A.H. King, and H. Herman: J. Am. Ceram. Soc., 1998, vol. 81, pp. 121–8.CrossRefGoogle Scholar
  4. 4.
    P. Fauchais, A. Vardelle, and A. Denoirjean: Surface Coatings Technol., 1997, vol. 97, pp. 66–78.CrossRefGoogle Scholar
  5. 5.
    T. Yoshida: Pure Appl. Chem., 1994, vol. 6, pp. 1223–30.Google Scholar
  6. 6.
    E. Bouyer, M. Müller, G. Schiller, and R. Henne: “Conversion of silanes into SiC by RF Plasma Technology,” p. 853 of Proc. UTSC’99, Düsseldorf, 1999.Google Scholar
  7. 7.
    N. Rao, S. Girshick, J. Heberlein, P. Mc Murry, S. Jones, D. Hansen, and B. Micheel: Plasma Chem. Plasma Processing, 1995, vol. 15 (4), pp. 581–606.CrossRefGoogle Scholar
  8. 8.
    J.-F. Bilodeau and P. Proulx: Aerosol Sci. Technol., 1996, vol. 24, pp. 175–89.CrossRefGoogle Scholar

References

  1. 1.
    S. Mann: Nature, 1988, vol. 332 (10), pp. 119–24.CrossRefGoogle Scholar
  2. 2.
    T.J. Webster, R.W. Siegel, and R. Bizios: Biomaterials, 1999, vol. 20, pp. 1221–27.CrossRefGoogle Scholar
  3. 3.
    B. Koch, J.G.C. Wolke, and K. de Groot: J. Biomed. Mater. Res., 1990, vol. 24, pp. 655–67.CrossRefGoogle Scholar
  4. 4.
    H. Ji, C.B. Ponton, and P.M. Marquis: J. Biomed. Mater. Res., 1992, vol. 3, pp. 283–87.Google Scholar
  5. 5.
    C.C. Berndt, G.N. Haddad, A.J.D. Farmer, and K.A. Gross: Mater. Forum, 1990, vol. 14, pp. 161–73.Google Scholar
  6. 6.
    R.Z. LeGeros: Clin. Mater., 1993, vol. 14, pp. 65–68.CrossRefGoogle Scholar
  7. 7.
    K.A. Gross, C.C. Berndt, D.D. Goldschlag, and V.J. Iacono: Int. J. Oral Maxillofacial Implants, 1997, vol. 12, pp. 589–97.Google Scholar
  8. 8.
    P. Ducheyne, S. Radin, and L. King: J. Biomed. Mater. Res., 1993, vol. 27, pp. 25–34.CrossRefGoogle Scholar
  9. 9.
    J. Weng, Q. Liu, J.G.C. Wolke, X. Zhang, and K. de Groot: Biomaterials, 1997, vol. 18, 1027–35.CrossRefGoogle Scholar
  10. 10.
    W. Tong, Z. Yang, X. Zhang, A. Yang, J. Feng, Y. Cao, and I. Chen: J. Biomedical Mater. Res., 1998, vol. 40 (3), pp. 407–13.CrossRefGoogle Scholar

References

  1. 1.
    C.C. Berndt and E.J. Lavernia: J. Thermal Spray Technol., 1998, vol. 7 (3), pp. 411–41.CrossRefGoogle Scholar
  2. 2.
    E.J. Lavernia, M.L. Lau, and H.G. Jiang: in Nanostructured Materials, G.M. Chow and N.I. Noskova, eds., Kluwer Academic Publishers, 1998, pp. 283–301.Google Scholar
  3. 3.
    L. Pawlowski: The Science and Engineering of Thermal Spray Coatings, John Whiley & Sons, New York, NY, 1995.Google Scholar
  4. 4.
    Tecnar Automation Ltee, 3502 First Street, St-Hubert, PQ, Canada, J3Y 8Y5.Google Scholar
  5. 5.
    J. Blain, F. Nadeau, L. Pouliot, C. Moreau, P. Gougeon, and L. Leblanc: Surface Eng., 1997, vol. 13, pp. 420–24.Google Scholar
  6. 6.
    L. Leblanc and C. Moreau: in Thermal Spray: Meeting the Challenges of the 21th Century, C. Coddet, ed., ASM International, Materials Park, OH, (1998) pp. 773–78.Google Scholar
  7. 7.
    L. Jacobs, M.M. Hyland, J. Gutleber, and S. Sampath: United Thermal Spray Conf. Proc., E. Lugscheider and P.A. Kammer, eds., DVS, 1999, pp. 439–45.Google Scholar
  8. 8.
    B. Arsenault, P. Gougeon, J.G. Legoux, and C. Moreau: Surftec-Resources Progress Report #3, Industrial Materials Institute, National Research Council Canada, Nov. 1996.Google Scholar

References

  1. 1.
    A. Vardelle, J. M. Barronnet, M. Vardelle, and P. Fauchais: IEEE Trans. Plasma Sci., 1980, vol. PS-8 (4), pp. 417–24.CrossRefGoogle Scholar
  2. 2.
    M. Vardelle, A. Vardelle, P. Fauchais, and M. I. Boulos: AIChE. J., 1988, vol. 34 (4), pp. 567–73.CrossRefGoogle Scholar
  3. 3.
    N. K. Joshi, S. N. Sahasrabudhe, K. P. Sreekumar, and N. Venkatramani: Measurement Sci. Technol., 1997, vol. 8, pp. 1146–50.CrossRefGoogle Scholar

References

  1. 1.
    FLUENT 4.4 User’s Guide, 2nd ed., Fluent Inc., Lebanon, NH, 1997.Google Scholar
  2. 2.
    B. Pateyron, M.-F. Elchinger, G. Delluc, and P. Fauchais: Plasma Chem. Plasma Processing, 1992, vol. 12 (4), pp. 421–48.CrossRefGoogle Scholar
  3. 3.
    B. Dussoubs, A. Vardelle, and P. Fauchais: in Progress in Plasma Processing of Materials, Proc. 4th Int. Thermal Plasma Processes Conf., Athens, Greece, July 15–18, 1996, P. Fauchais et al., eds., Begell House, New York, NY, 1997, pp. 861–69.Google Scholar
  4. 4.
    E. Lugscheider, C. Barimani, P. Eckert, and U. Eritt: in Progress in Plasma Processing of Materials, Proc. 4th Int. Thermal Plasma Processes Conf., Athens, Greece, July 15–18, 1996, P. Fauchais et al., eds., Begell House, New York, NY, 1997, pp. 871–80.Google Scholar

References

  1. 1.
    S. Usmani, S. Sampath, D. Houck, and D. Lee: Tribol. Trans., 1997, vol. 40 (3), (1997) pp. 470–78.Google Scholar
  2. 2.
    C.-J. Li, A. Ohmori, and Y. Harada: J. Mater. Sci., 1996, vol. 31, pp. (1996) 785–94.CrossRefGoogle Scholar

References

  1. 1.
    S.D. Antolovich: ASM Handbook, vol. 19, Fatigue and Fracture, ASM International, Materials Park, OH, 1996, p. 37.Google Scholar
  2. 2.
    H. Hanh, P. Mondal, and K.A. Padmanabhan: Nanostr. Mater., 1997, vol. 9, pp. 603–06.CrossRefGoogle Scholar
  3. 3.
    S. Li, K. Lu, F. Guo, R. Chu, and Z. Wang: Mater. Lett., 1997, vol. 30, pp. 305–10.CrossRefGoogle Scholar
  4. 4.
    K. Jia, T.E. Fischer, and B. Gallois: Nanostr. Mater., 1998, vol. 10, pp. 875–91.CrossRefGoogle Scholar
  5. 5.
    M.C. Shaw, D.B. Marshall, B.J. Dalgleish, M.S. Dadkhah, M.Y. He and A.G. Evans. Acta Metall. Mater., 1994, vol. 42, pp. 4091–99.CrossRefGoogle Scholar
  6. 6.
    A.G. Evans and J.W. Hutchinson: Acta Metall. Mater., 1995, vol. 43, pp. 2507–30.CrossRefGoogle Scholar
  7. 7.
    R.T.R. McGrann, D.J. Greving, J.R. Shadley, E.F. Rybicki, T.L. Kruecke, and B.E. Bodger: Surface Coating Technol., 1998, vol. 108–109, pp. 59–64.CrossRefGoogle Scholar
  8. 8.
    S. Shah and A.H. Chokski: Coll. Surfaces A, 1998, vol. 133, pp. 57–61.CrossRefGoogle Scholar
  9. 9.
    N. Wang, Z. Wang, K.T. Aust, and E. Erb: Acta Metall. Mater., 1995, vol. 43, pp. 519–28.CrossRefGoogle Scholar

References

  1. 1.
    L.S. Schadler, K.O. Laul, R.W. Smith, and E. Petrovicova: J. Thermal Spray Technol., 1997, vol. 6 (4), (1997) pp. 475–85.CrossRefGoogle Scholar
  2. 2.
    E. Petrovicova, R. Knight, R.W. Smith, and L.S. Schadler: Proc. 1st United Thermal Spray Conf., ASM International, Indianapolis, IN, 1997, pp. 877–83.Google Scholar
  3. 3.
    F. Mansfeld: Corrosion, 1981, vol. 36 (5), pp. 301–07.Google Scholar

References

  1. 1.
    L. Shaw, D. Goberman, M. Gell, S. Jiang, Y. Wang, T.D. Xiao, and P. Strutt: SurfaceCoatings Technol., 2000, vol. 130 (1), pp. 1–8.Google Scholar

References

  1. 1.
    J. Fernandez de la Mora, S.V. Hering, N.P. Rao, and P.H. McMurry: J. Aerosol Sci., 1990, vol. 21 (2), pp. 169–87.CrossRefGoogle Scholar
  2. 2.
    N.P. Rao, H.J. Lee, M. Kelkar, D.J. Hansen, J.V.R. Heberlein, P.H. McMurry, and S.L. Girshick: Nanostruct. Mater., 1997, vol. 9, pp. 129–32.CrossRefGoogle Scholar
  3. 3.
    N P. Rao, N. Tymiak, J. Blum, A. Neuman, H.J. Lee, S.L. Girshick, P.H. McMurry, and J. Heberlein: J. Aerosol Sci., 1998, vol. 29 (5–6), pp. 707–20.CrossRefGoogle Scholar
  4. 4.
    J. Blum, N. Tymiak, A. Neuman, Z. Wong, N.P. Rao, S.L. Girshick, W.W. Gerberich, P.H. McMurry, and J.V.R. Heberlein: J. Nanoparticle Res., 1999, vol. 1 (1), pp. 31–42.CrossRefGoogle Scholar

References

  1. 1.
    N.Q. Minh and T. Takahashi: Science and Technology of Ceramic Fuel Cells, Elsevier, Amsterdam, (1995).Google Scholar
  2. 2.
    T. Yoshida, T. Okada, H. Hamatani, and H. Kumaoka: Plasma Sources Sci. Technol., 1992, vol. 1, pp. 195–201.CrossRefGoogle Scholar
  3. 3.
    L.-W. Tai and P.A. Lessing: J. Am. Ceram. Soc., 1991, vol. 74 (3), pp. 501–04.CrossRefGoogle Scholar
  4. 4a.
    R. Henne, G. Schiller, V. Borck, M. Müller, M. Lang, and R. Ruckdäschel: in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, (ed.), ASM International, Materials Park, OH, 1998, pp. 933–38.Google Scholar
  5. 5.
    H. Gruner and H. Tannenberger: Proc. 1st Eur. SOFC Forum, Lucerne, Switzerland, 1994, vol. 2, pp. 611–17.Google Scholar
  6. 6.
    F. Gitzhofer, E. Bouyer, and M.I. Boulos: U.S. Patent No. 5,609,921, 1997.Google Scholar
  7. 7.
    H. Zhu, Y.C. Lau, and E. Pfender: J. Appl. Phys., 1991, vol. 69 (5), pp. 3404–06.CrossRefGoogle Scholar
  8. 8.
    G. Schiller, M. Müller, and F. Gitzhofer: in Thermal Spray: Meeting the Challenges of the 21st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 363–67.Google Scholar

References

  1. 1.
    P.R. Strutt, B.H. Kear, and R.F. Boland: U.S. Patent 6,025,034, Feb. 15. 2000, original application filed Nov. 1995 and abandoned.Google Scholar
  2. 2.
    T.D. Xiao, C.W. Strock, D.M. Wang. and P.R. Strutt:, U.S. Patent field Aug. 1997.Google Scholar
  3. 3.
    B.H. Kear and P.R. Strutt: Naval Rev. 1994, vol. XLVI, p. 4.Google Scholar

References

  1. 1.
    G. Barbezat, A. Nicoll, and A. Sickinger: Wear, 1993, vol. 162–164, pp. 529–37.CrossRefGoogle Scholar
  2. 2.
    J. Takeuchi, H. Nakahira, and J. Nagai: 2nd Plasma Technik Symp., Lucerne, Switzerland, 1991, pp. 141–51.Google Scholar
  3. 3.
    R. Stevens: Zirconia and Zirconia Ceramics, Pub. Magnesium Elektron, Twickenham, United Kingdom, 1986.Google Scholar

Copyright information

© ASM International 2001

Authors and Affiliations

  • C. C. Berndt
    • 1
  1. 1.State University of New York at Stony BrookU.S.A.

Personalised recommendations