Hot strip processing of low carbon enameling grades in the range of 600 to 700 °C

  • A. Van Cauter
  • J. Dilewijns
  • F. Hörzenberger
  • R. A. Hubert
  • B. C. De Cooman


The processing of continuously cast low carbon steel grades for enameling usually requires a high coiling temperature. Low-temperature coiling, however, is required to ensure deep drawability. A steel composition characterized by low AIN leads to a material combining both good formability and enamelability ratio for hot strip coiling temperatures in the range of 600 to 700 °C. The influence of the coiling temperature on the mechanical properties, cementite morphology, H permeation, and enamel adhesion was studied in detail.


continuous casting coatings coiling enameling steels 


Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.


  1. 1.
    W.B. Hutchinson: Int. Met. Rev., 1984, vol. 29 (1), pp. 25–42.CrossRefGoogle Scholar
  2. 2.
    R. Hubert: ATB Metall., 1995, vol. 34–35, pp. 5–10.Google Scholar
  3. 3.
    J. Albrecht, H.-E. Bühler, and S. Baumgartl: Arch. Eisenhüttenwes, 1974, Aug., pp. 561–65.Google Scholar
  4. 4.
    E. Riecke, B. Johnen, R. Möller, and H.J. Grabke: Weerkstoffe Korr., 1985, vol. 36, pp. 435–54.CrossRefGoogle Scholar
  5. 5.
    A. Dietzel, H. Warnke, and H. Dittmer: Mitt. Vereins Deutscher Emailfachleute, 1985, Dec., pp. 153–64.Google Scholar
  6. 6.
    F.M. Koch and K.-D. Rogausch: Mitt. Vereins Deutscher Emailfachleute, 1991, May, pp. 49–62.Google Scholar
  7. 7.
    A. Dietzel and H. Dittmer: Arch Eisenhüttenwes., 1984, Oct., pp. 483–86.Google Scholar
  8. 8.
    Z.-L. Pan, I.G. Ritchie, and H.K. Schmidt: Automatic Piezoelectric Ultrasonic Composite Oscillator Technique (APUCOT), User Manual, AECL Research, Whiteshell Laboratories, Pinawa, Manitoba, Canada.Google Scholar
  9. 9.
    I.G. Ritchie, Z.-L. Pan, K.W. Sprungmann, H.K. Schmidt, and R. Dutton: Can. Met. Q., 1987, vol. 26, pp. 239–50.CrossRefGoogle Scholar
  10. 10.
    K. Eloot and J. Dilewijns: ISIJ Int., 1997, vol. 37 (6), pp. 604–14.Google Scholar
  11. 11.
    K. Eloot, L. Kestens, and Dilewijns: ISIJ Int., 1997, vol. 37 (6), pp. 614–22.Google Scholar
  12. 12.
    K. Eloot, J. Dilewijns, C. Standaert, and B.C. De Cooman: J. Magn. Magn. Mater., 1994, vol. 133, pp. 223–25.CrossRefGoogle Scholar
  13. 13.
    L. Guillot, R. Tarriant, D. Rault, and M. Entringer: Surfaces, 1986, vol. 182, p. 27.Google Scholar
  14. 14.
    L. Guillot and Seurin: PEI Meeting Atlanta, July 1989, Vitreous Enameller, United Kingdom, 1989, p. 110.Google Scholar
  15. 15.
    W. Birmes, L. Meyer, and W. Warnecke: Mitt. Vereins Deutscher Emailfachleute 1974, vol. 22, H. 5, pp. 41–48.Google Scholar
  16. 16.
    W.C. Leslie, R.L. Rickett, C.I. Dotson, and C.S. Walton: Trans. ASM, 1954, vol. 46, pp. 1470–99.Google Scholar
  17. 17.
    G. Papp, G. Giedenbacher, K. Kösters, and F. Wallner: Mitt. Vereins Deutscher Emailfachleute 1985, vol. 33, H. 3, pp. 25–36.Google Scholar
  18. 18.
    G. Papp,, G. Giedenbacher, and F. Wallner: Mitt. Vereins Deutscher Emailfachleute 1987, vol. 35, H. 1.Google Scholar
  19. 19.
    F. Listhuber and E. Gieger: Mitt. Vereins Deutscher Emailfachleute, 1974, vol. 22, H. 2, pp. 13–24.Google Scholar
  20. 20.
    K. Ecker, G. Papp, G. Emsthofer, and G. Giedenbacher: Mitt. Vereins Deutscher Emailfachleute 1981, vol. 29, H. 11, pp. 143–56.Google Scholar

Copyright information

© ASM International 2000

Authors and Affiliations

  • A. Van Cauter
    • 1
  • J. Dilewijns
    • 1
  • F. Hörzenberger
    • 2
  • R. A. Hubert
    • 2
  • B. C. De Cooman
    • 2
  1. 1.Laboratory for Iron and SteelmakingUniversity of GhentZwijnaarde (Ghent)Belgium
  2. 2.Ocas N. V., Research Centre of the Sidmar GroupZelzateBelgium

Personalised recommendations