Process failure modes and effects analysis (PFMEA): A structured approach for quality improvement in the metal forming industry

  • George Pantazopoulos
  • George Tsinopoulos
Features Analysis

Abstract

Failure modes and effects analysis (FMEA) is one potential tool with extended use in reliability engineering for the electrical and electronic components production field as well as in complicated assemblies (aerospace and automotive industries). The main purpose is to reveal system weaknesses and thereby minimize the risk of failure occurrence. The FMEA technique is used in the design stage of a system or product (DFMEA) as well as in the manufacturing process (PFMEA). Currently, the implementation of quality systems (such as ISO 9001, QS9000, TS 16949, etc.) requires the establishment of preventive procedures; therefore, the use of risk analysis methods, such as FMEA, is mandatory. This paper introduces the use of this technique in a critical process in the metal forming industry.

Keywords

Case History Failure Analysis Quality Function Deployment Risk Priority Number Prevention Volume 
These keywords were added by machine and not by the authors. This process is experimental and the keywords may be updated as the learning algorithm improves.

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    “Fundamentals and Vocabulary,” BS EN ISO 9000:2000, International Organization for Standardization, Geneva, Switzerland.Google Scholar
  2. 2.
    “Requirements,” BS EN ISO 90001:2000, International Organization for Standardization, Geneva, Switzerland.Google Scholar
  3. 3.
    D. Dennies: “The Organization of a Failure Investigation,” Pract Fail. Anal., 2002, 2(3), pp. 11–41.CrossRefGoogle Scholar
  4. 4.
    R. Latino and K. Latino: Root-Cause Analysis-Improving Performance for Bottom Line Results, CRC Press, Boca Raton, FL, 1999.Google Scholar
  5. 5.
    J.R. Aldridge and B.G. Dale: in Managing Quality, B.G. Dale, ed., Blackwell Publishing, Oxford, U.K., 2002, pp. 352–65.Google Scholar
  6. 6.
    J. Garside and C. Tsinopoulos: Guide to Manufacturing Excellence: Performance Analysis of Finalists and Winners Mx2000–2003, The Institution of Mechanical Engineers, London, 2004.Google Scholar
  7. 7.
    G. Tsinopoulos and G. Pantazopoulos: “Application of Failure Mode and Analysis Method (FMEA) as a Quality Improvement Technique in Metal Working Industry,” Proc. Second Metallic Materials Conference, Nov 25–26, 2004 (National Technical University of Athens), Hellenic Metallurgical Society, Athens, pp. 421–26 (in Greek).Google Scholar
  8. 8.
    “Standard Test Method for Determining Average Grain Size,” ASTM E-112, American Society for Testing and Materials, West Conshohocken, PA, 1996.Google Scholar

Copyright information

© ASM International 2005

Authors and Affiliations

  • George Pantazopoulos
    • 1
  • George Tsinopoulos
    • 1
  1. 1.HALCOR S.A. Metal Works, Quality Control and Quality Assurance DepartmentAthensGreece

Personalised recommendations