Advertisement

AAPS PharmSciTech

, 20:289 | Cite as

Exploring the Potential of Mesoporous Silica as a Carrier for Puerarin: Characterization, Physical Stability, and In Vivo Pharmacokinetics

  • Zhi Wang
  • Bei-Ni Ye
  • Yong-Tai Zhang
  • Jian-Xu Xie
  • Wan-Si Li
  • Hong-Tao Zhang
  • Ying Liu
  • Nian-Ping FengEmail author
Research Article
  • 15 Downloads

Abstract

The aim of this study was to evaluate the use of a novel porous silica carrier, AEROPERL® 300 Pharma (AP), to improve the in vitro release and oral bioavailability of puerarin (PUE) in solid dispersions (SDs). PUE-AP SD formulations with different ratios of drug to silica (RDS) were prepared by the solvent method. The scanning electron microscopy (SEM) results indicated that the dispersion of PUE improved as the concentration of AP was increased. The differential scanning calorimetry (DSC) and X-ray diffraction (XRD) results revealed that PUE mostly existed in an amorphous state in the SDs. The rate of drug dissolution from the SDs was significantly higher than that from the PUE powder (p < 0.05). The in vitro drug release percentage from the PUE-AP SDs increased as the RDS was reduced. The oral bioavailability of PUE from the SDs improved when using AP, as indicated by AUC(0–∞), which was 2.05 and 2.01 times greater than that of the PUE (API) and PVP K30 SDs, respectively (p < 0.05). The drug content, in vitro release profiles, and the amorphous state of PUE in the PUE-AP SDs showed no significant changes after being stored at room temperature for 6 months or under accelerated conditions (40 ± 2°C, 75 ± 5% relative humidity) for 3 months. AP has a high pore volume, large specific surface area, excellent flowability, and hydrophilic properties, making it capable of improving the dissolution and bioavailability of poorly water-soluble drugs.

KEY WORDS

AEROPERL® 300 Pharma puerarin solid dispersion physical stability bioavailability 

Notes

Funding Information

This study was financially supported by Evonik Specialty Chemicals (Shanghai) Co., Ltd. and the National Natural Science Foundation of China (81603308).

Compliance with Ethical Standards

All the animal experiments were carried out in accordance with the guidelines of the National Act on the Use of Experimental Animals and were approved by the local ethics committee (SCXK:2013-0016).

References

  1. 1.
    Rowe RC, Sheskey PJ, Cook WG, Fenton ME. Handbook of pharmaceutical excipients. 7th ed. London: The Pharmaceutical Press; 2012.Google Scholar
  2. 2.
    Meer T, Fule R, Khanna D, Amin P. Solubility modulation of bicalutamide using porous silica. J Pharm Invest. 2013;43:279–85.CrossRefGoogle Scholar
  3. 3.
    Riikonen J, Xu WJ, Lehto VP. Mesoporous systems for poorly soluble drugs—recent trends. Int J Pharm. 2018;536:178–86.CrossRefGoogle Scholar
  4. 4.
    Planinšk O, Kovačič B, Vrečer F. Carvedilol dissolution improvement by preparation of solid dispersions with porous silica. Int J Pharm. 2011;406:41–8.CrossRefGoogle Scholar
  5. 5.
    Miura H, Kanebako M, Shirai H, Nakao H, Inagi T, Terada K. Enhancement of dissolution rate and oral absorption of a poorly water-soluble drug, K-832, by adsorption onto porous silica using supercritical carbon dioxide. Eur J Pharm Biopharm. 2010;76:215–21.CrossRefGoogle Scholar
  6. 6.
    Li TT, Geng TJ, Md A, Banerjee P, Wang B. BoNovel scheme for rapid synthesis of hollow mesoporous silica nanoparticles (HMSNs) and their application as an efficient delivery carrier for oral bioavailability improvement of poorly water-soluble BCS type II drugs. Colloids Surf B: Biointerfaces. 2019;176(2):185–93.CrossRefGoogle Scholar
  7. 7.
    Maleki A, Kettiger H, Schoubben A, Rosenholm JM, Ambrogi V, Hamidi M. Mesoporous silica materials: from physico-chemical properties to enhanced dissolution of poorly water-soluble drugs. J Control Release. 2017;262:329–47.CrossRefGoogle Scholar
  8. 8.
    Shen SC, Ng WK, Chia LS, Dong YC, Tan RB. Applications of mesoporous materials as excipients for innovative drug delivery and formulation. Curr Pharm Des. 2013;19(35):6270–89.CrossRefGoogle Scholar
  9. 9.
    Wei QH, Keck CM, Müller RH. Oral hesperidin—amorphization and improved dissolution, properties by controlled loading onto porous silica. Int J Pharm. 2017;518(1–2):253–63.CrossRefGoogle Scholar
  10. 10.
    Pawar JN, Desai HR, Moravkar KK, Khanna DK, Amin PD. Exploring the potential of porous silicas as a carrier system for dissolution rate enhancement of artemether. Asian J Pharm Sci. 2016:760–70.CrossRefGoogle Scholar
  11. 11.
    Alam MA, Ali R, Al-Jenoobi FI, Al-Mohizea AM. Solid dispersions: a strategy for poorly aqueous soluble drugs and technology updates. Expert Opin Drug Deliv. 2012;9(11):1419–40.CrossRefGoogle Scholar
  12. 12.
    Bikiaris DN. Solid dispersions, part I: recent evolutions and future opportunities in manufacturing methods for dissolution rate enhancement of poorly water-soluble drugs. Expert Opin Drug Deliv. 2011;8:1501–19.CrossRefGoogle Scholar
  13. 13.
    Gao Q, Yang B, Ye ZG, Wang J, Bruce IC, Xia Q. Opening the calcium-activated potassium channel participates in the cardioprotective effect of puerarin. Eur J Pharmacol. 2007;574:179–84.CrossRefGoogle Scholar
  14. 14.
    Zhou YX, Zhang H, Peng C. Puerarin: a review of pharmacological effects. Phytother Res. 2014;28(7):961–75.CrossRefGoogle Scholar
  15. 15.
    Wei SY, Chen Y. Xu XY. Progress on the pharmacological research of puerarin: a review. Chin J Nat Med. 2014;12(6):407–14.PubMedGoogle Scholar
  16. 16.
    Jiang XL, Jia YT, Zhang LK, Tian R, Teng YZ. Optimization of self-microemulsifying drug delivery system for puerarin by central composite design-response surface methodology. J Third Mil Med Univ. 2012;34(14):1414–7.Google Scholar
  17. 17.
    Khan AW, Kotta S, Ansari SH, Sharma RK, Ali J. Enhanced dissolution and bioavailability of grapefruit flavonoid naringenin by solid dispersion utilizing fourth generation carrier. Drug Dev Ind Pharm. 2015;41(5):772–29.CrossRefGoogle Scholar
  18. 18.
    Seo SW, Han HK, Chun MK, Choi HK. Preparation and pharmacokinetic evaluation of curcumin solid dispersion using Solutol® HS15 as a carrier. Int J Pharm. 2012;424:18–25.CrossRefGoogle Scholar
  19. 19.
    Chinese Pharmacopoeia Commission. Pharmacopoeia of the People’s Republic of China (Volume IV). In: General rule; 2015. p. 0861.Google Scholar
  20. 20.
    Hattori Y, Haruna Y, Otsuka M. Dissolution process analysis using model-free Noyes-Whitney integral equation. Colloids Surf B: Biointerfaces. 2013;102(1):227–31.CrossRefGoogle Scholar
  21. 21.
    Evonik, 2012. AEROSIL and AEROPERL colloidal silicon dioxide for pharmaceuticals technical information.Google Scholar
  22. 22.
    Hancock BC, Parks M. What is the true solubility advantage for amorphous pharmaceuticals? Pharm Res. 2000;17(4):397–404.CrossRefGoogle Scholar
  23. 23.
    Qian KK, Bogner RH. Application of mesoporous silicon dioxide and silicate in oral amorphous drug delivery systems. J Pharm Sci. 2012;101(2):444–63.CrossRefGoogle Scholar
  24. 24.
    Vogt FG, Roberts-Skilton K, Kennedy-Gabb SA. A solid-state NMR study of amorphous ezetimibe dispersions in mesoporous silica. Pharm Res. 2013;30(9):2315–31.CrossRefGoogle Scholar
  25. 25.
    Li X, Peng H, Tian B, Gou J, Yao Q, Tao X, et al. Preparation and characterization of azithromycin – Aerosil 200 solid dispersions with enhanced physical stability. Int J Pharm. 2015;486(1–2):175–84.CrossRefGoogle Scholar
  26. 26.
    Chauhan B, Shimpi S, Paradkar A. Preparation and evaluation of glibenclamide-polyglycolized glycerides solid dispersions with silicon dioxide by spray drying technique. Eur J Pharm Sci. 2005;26(2):219–30.CrossRefGoogle Scholar
  27. 27.
    Singh A, Van den Mooter G. Spray drying formulation of amorphous solid dispersions. Adv Drug Deliv Rev. 2016;100:27–50.CrossRefGoogle Scholar
  28. 28.
    Pawar JN, Shete RT, Gangurde AB, Moravkar KK, Javeer SD, Jaiswar DR, et al. Development of amorphous dispersions of artemether with hydrophilic polymers via spray drying: physicochemical and in silico studies. Asian J Pharm Sci. 2016;11(3):385–95.CrossRefGoogle Scholar
  29. 29.
    Zhong L, Zhu X, Yu B, Sn W. Influence of alkalizers on dissolution properties of telmisartan in solid dispersions prepared by cogrinding. Drug Dev Ind Pharm. 2014;40(12):1660–9.CrossRefGoogle Scholar
  30. 30.
    He Y, Ho C. Dispersions: solid amorphous utilization and challenges in drug discovery and development. J Pharm Sci. 2015;104(10):3237–58.CrossRefGoogle Scholar
  31. 31.
    Alshahrani SM, Lu W, Park JB, Morott JT, Alsulays BB, Majumdar S, et al. Stability-enhanced hot-melt extruded amorphous solid dispersions via combinations of Soluplus® and HPMCAS-HF. AAPS PharmSciTech. 2015:1–11.Google Scholar
  32. 32.
    Ma XY, Williams RO. Characterization of solid amorphous dispersions: an update. J Drug Deliv Sci Technol. 2019;50:113–24.CrossRefGoogle Scholar
  33. 33.
    Rumondor AC, Stanford LA, Taylor LS. Effects of polymer type and storage relative humidity on the kinetics of felodipine crystallization from amorphous solid dispersions. Pharm Res. 2009;26(12):2599–606.CrossRefGoogle Scholar
  34. 34.
    Li W, Buckton G. Using DVS-NIR to assess the water sorption behaviour and stability of a griseofulvin/PVP K30 solid dispersion. Int J Pharm. 2015;495(2):999–1004.CrossRefGoogle Scholar
  35. 35.
    US Pharmacopoeia (USP 41), 2018.Google Scholar
  36. 36.
    Ye BN, Wang Z, Feng NP. Solidification of patchouli oil with fumed silica AEROPERL® 300 Pharma. Chin J New Drugs. 2015;24(1):80–4.Google Scholar

Copyright information

© American Association of Pharmaceutical Scientists 2019

Authors and Affiliations

  • Zhi Wang
    • 1
  • Bei-Ni Ye
    • 1
    • 2
  • Yong-Tai Zhang
    • 1
  • Jian-Xu Xie
    • 1
  • Wan-Si Li
    • 1
  • Hong-Tao Zhang
    • 3
  • Ying Liu
    • 1
  • Nian-Ping Feng
    • 1
    Email author
  1. 1.Department of Pharmaceutical Sciences, School of PharmacyShanghai University of Traditional Chinese MedicineShanghaiChina
  2. 2.Preparation DepartmentHangzhou Qingyue Pharmaceutical Technology Co., Ltd.HangzhouChina
  3. 3.Resource EfficiencyEvonik Specialty Chemicals (Shanghai) Co., Ltd.ShanghaiChina

Personalised recommendations