Advertisement

AAPS PharmSciTech

, 20:157 | Cite as

Feedforward and Feedback Control of a Pharmaceutical Coating Process

  • Yuxiang Zhao
  • James K. Drennen
  • Shikhar Mohan
  • Suyang Wu
  • Carl A. AndersonEmail author
Research Article Theme: Team Science and Education for Pharmaceuticals: the NIPTE Model
Part of the following topical collections:
  1. Theme: Team Science and Education for Pharmaceuticals: the NIPTE Model

Abstract

This work demonstrates the use of a combination of feedforward and feedback loops to control the controlled release coating of theophylline granules. Feedforward models are based on the size distribution of incoming granules and are used to set values for the airflow in the fluid bed processor and the target coat weight to be applied to the granules. The target coat weight of the granules is controlled by a feedback loop using NIR spectroscopy to monitor the progress of the process. By combining feedforward and feedback loops, significant variation in the size distributions and ambient conditions were accommodated in the fluid bed coating of the granules and a desired dissolution profile was achieved. The feedforward component of the control system was specifically tested by comparing the performance of the control system with and without this element by Monte Carlo simulation.

Keywords

feedforward feedback process control granule coating near-infrared 

Notes

Acknowledgements

We would like to thank Dr. Carl Wassgren and Dr. Dhananjay A Pai from Purdue University for the production of the theophylline granules.

Funding Information

The National Institute for Pharmaceutical Technology and Education (NIPTE) and the U.S. Food and Drug Administration (FDA) provided funds for this research. This study was funded by the FDA Grant to NIPTE titled “The Critical Path Manufacturing Sector Research Initiative (U01)”; Grant# 5U01FD004275.

References

  1. 1.
    Byrnes C, Isidori A. Output regulation for nonlinear systems: an overview. Int J Robust Nonlinear Control. 2000;10(5):323–37.CrossRefGoogle Scholar
  2. 2.
    Corripio AB. Tuning of industrial control systems: Isa; 2000.Google Scholar
  3. 3.
    Johansson B. Feedforward control in dynamic situations. Sweden: Linköping University; 2003.Google Scholar
  4. 4.
    Yu LX. Pharmaceutical quality by design: product and process development, understanding, and control. Pharm Res. 2008;25(4):781–91.CrossRefGoogle Scholar
  5. 5.
    Yu LX, Amidon G, Khan MA, Hoag SW, Polli J, Raju GK, et al. Understanding pharmaceutical quality by design. AAPS J. 2014;16(4):771–83.CrossRefGoogle Scholar
  6. 6.
    Méndez-Acosta H, Campos-Delgado DU, Femat R, González-Alvarez V. A robust feedforward/feedback control for an anaerobic digester. Comput Chem Eng. 2005;29(7):1613–23.CrossRefGoogle Scholar
  7. 7.
    Hattori Y, Otsuka M. Modeling of feed-forward control using the partial least squares regression method in the tablet compression process. Int J Pharm. 2017;524(1–2):407–13.CrossRefGoogle Scholar
  8. 8.
    Westerhuis JA, Coenegracht PMJ, Lerk CF. Multivariate modelling of the tablet manufacturing process with wet granulation for tablet optimization and in-process control. Int J Pharm. 1997;156:109–17.CrossRefGoogle Scholar
  9. 9.
    Mota J. Matrix- and reservoir- type oral multiparticulate drug delivery systems. Berlin: Freien Universität Berlin; 2010.Google Scholar
  10. 10.
    Dashevsky A, Wagner K, Kolter K, Bodmeier R. Physicochemical and release properties of pellets coated with Kollicoat SR 30 D, a new aqueous polyvinyl acetate dispersion for extended release. Int J Pharm. 2005;290(1–2):15–23.CrossRefGoogle Scholar
  11. 11.
    Kolter K, Dashevsky A, Irfan M, Bodmeier R. Polyvinyl acetate-based film coatings. Int J Pharm. 2013;457(2):470–9.CrossRefGoogle Scholar
  12. 12.
    The United States Pharmacopeia. Theophylline extended-release capsules. Pharm Forum. 2006;31, 185(1).Google Scholar
  13. 13.
    Carlin B, Yang S, Li JX, Felton LA. Pseudolatex dispersions for controlled drug delivery. In: Aqueous polymeric coatings for pharmaceutical dosage forms. 4th ed. Boca Raton: CRC Press; 2016. p. 11–46.Google Scholar
  14. 14.
    Farooq M, Shoaib MH, Yousuf RI, Qazi F, Hanif M. Development of extended release loxoprofen sodium multiparticulates using different hydrophobic polymers. Polym Bull. 2018:1–22.Google Scholar
  15. 15.
    Koji Muteki KY, Reid GL, Krishnan M. De-risking scale-up of a high shear wet granulation process using latent variable modeling and near-infrared spectroscopy. J Pharm Innov. 2011;6:142–56.CrossRefGoogle Scholar
  16. 16.
    Muteki K, Swaminathan V, Sekulic SS, Reid GL. De-risking pharmaceutical tablet manufacture through process understanding, latent variable modeling, and optimization technologies. AAPS PharmSciTech. 2011;12(4):1324–34.CrossRefGoogle Scholar
  17. 17.
    ICH Guideline. Pharmaceutical development. Q8 (2R). As revised in August. 2009.Google Scholar

Copyright information

© American Association of Pharmaceutical Scientists 2019

Authors and Affiliations

  • Yuxiang Zhao
    • 1
  • James K. Drennen
    • 1
    • 2
  • Shikhar Mohan
    • 1
  • Suyang Wu
    • 1
  • Carl A. Anderson
    • 1
    • 2
    Email author
  1. 1.Duquesne University Graduate School of Pharmaceutical SciencesPittsburghUSA
  2. 2.Duquesne University Center for Pharmaceutical TechnologyPittsburghUSA

Personalised recommendations