Advertisement

AAPS PharmSciTech

, 20:80 | Cite as

Abuse Deterrent Immediate Release Egg-Shaped Tablet (Egglets) Using 3D Printing Technology: Quality by Design to Optimize Drug Release and Extraction

  • Pavan Kumar Nukala
  • Siddhant Palekar
  • Manali Patki
  • Ketan PatelEmail author
Research Article Theme: NIPTE on Current Topics in Abuse Deterrent Science
Part of the following topical collections:
  1. Theme: NIPTE on Current Topics in Abuse Deterrent Science

Abstract

Opioid abuse is a growing problem and has become a national health crisis over the past decade in the USA. Oral ingestion, snorting, and injection are the most commonly employed routes of abuse for an immediate release product. To circumvent these issues, we have developed an egg-shaped tablet (egglet) using fused deposition modeling (FDM) 3D printing technology. Drug-loaded polymeric filaments (1.5 mm) were prepared using hot melt extrusion (HME) followed by printing into egglets of different sizes and infill densities. Based on printability and crush resistance, polyvinyl alcohol (PVA) was found to be the most suitable polymer for the preparation of abuse deterrent egglets. Further, egglets were evaluated and optimized for mechanical manipulation using household equipment, milling, particle size distribution, solvent extraction, and drug release as per the FDA guidance (November 2017). A multifactorial design was used to optimize egglets for solvent extraction and drug release. Extreme hardness (> 500 N) and very large particle size (> 1 mm) on mechanical manipulation confirmed the snorting deterring property while less than 15% drug extraction in 5 min (% Sext) demonstrated the deterrence for injection abuse. Quality target product profile D85 < 30 min and % Sext < 15 was achieved with egglets of 6 mm diameter, 45% infill density, and 15% w/w drug loading. Dose of drug can be easily customized by varying dimension and infill density without altering the composition. HME coupled with FDM 3D printing could be a promising tool in the preparation of patient-tailored, immediate release abuse deterrent formulation.

KEY WORDS

3D printing technology abuse deterrent dosage form quality by design dose customization hot melt extrusion 

Notes

Compliance with Ethical Standards

Conflict of Interest

The authors declare that they have no competing interests.

References

  1. 1.
    Rahman Z, Yang Y, Korang-Yeboah M, Siddiqui A, Xu X, Ashraf M, et al. Assessing impact of formulation and process variables on in-vitro performance of directly compressed abuse deterrent formulations. Int J Pharm. 2016;502(1–2):138–50.PubMedGoogle Scholar
  2. 2.
    Maincent J, Zhang F. Recent advances in abuse-deterrent technologies for the delivery of opioids. Int J Pharm. 2016;510(1):57–72.PubMedGoogle Scholar
  3. 3.
    Rahman Z, Zidan AS, Korang-Yeboah M, Yang Y, Siddiqui A, Shakleya D, et al. Effects of excipients and curing process on the abuse deterrent properties of directly compressed tablets. Int J Pharm. 2017;517(1–2):303–11.PubMedGoogle Scholar
  4. 4.
    Schaeffer T. Abuse-deterrent formulations, an evolving technology against the abuse and misuse of opioid analgesics. J Med Toxicol. 2012;8(4):400–7.PubMedPubMedCentralGoogle Scholar
  5. 5.
    Nalamachu SR, Shah B. Abuse of immediate-release opioids and current approaches to reduce misuse, abuse, and diversion. Postgrad Med. 2018:1–7.Google Scholar
  6. 6.
    Xu X, Gupta A, Al-Ghabeish M, Calderon SN, Khan MA. Risk based in vitro performance assessment of extended release abuse deterrent formulations. Int J Pharm. 2016;500(1–2):255–67.PubMedPubMedCentralGoogle Scholar
  7. 7.
    Food U, Administration D. Guidance for industry: abuse-deterrent opioids–evaluation and labeling. Silver Spring: US Department of Health and Human Services; 2015.Google Scholar
  8. 8.
    Food U, Administration D. Guidance for industry: general principles for evaluating the abuse deterrence of generic solid oral opioid drug products. Silver Spring: US Department of Health and Human Services; 2016.Google Scholar
  9. 9.
    Katz NP, Adams EH, Chilcoat H, Colucci RD, Comer SD, Goliber P, et al. Challenges in the development of prescription opioid abuse-deterrent formulations. Clin J Pain. 2007;23(8):648–60.PubMedGoogle Scholar
  10. 10.
    Cohen JP, Mendoza M, Roland C. Challenges involved in the development and delivery of abuse-deterrent formulations of opioid analgesics. Clin Ther. 2018;40(2):334–44.PubMedGoogle Scholar
  11. 11.
    Maddineni S, Battu SK, Morott J, Soumyajit M, Repka MA. Formulation optimization of hot-melt extruded abuse deterrent pellet dosage form utilizing design of experiments. J Pharm Pharmacol. 2014;66(2):309–22.PubMedGoogle Scholar
  12. 12.
    Pergolizzi JV Jr, Raffa RB, Taylor R Jr, Vacalis S. Abuse-deterrent opioids: an update on current approaches and considerations. Curr Med Res Opin. 2018;34(4):711–23.PubMedGoogle Scholar
  13. 13.
    Peacock A, Larance B, Bruno R, Pearson SA, Buckley NA, Farrell M, et al. Post-marketing studies of pharmaceutical opioid abuse-deterrent formulations: a framework for research design and reporting. Addiction. 2018.Google Scholar
  14. 14.
    Alexander L, Mannion RO, Weingarten B, Fanelli RJ, Stiles GL. Development and impact of prescription opioid abuse deterrent formulation technologies. Drug Alcohol Depend. 2014;138:1–6.PubMedGoogle Scholar
  15. 15.
    Khan MF, Gharibo C. Abuse deterrent opioids. Tech Reg Anesth Pain Manag. 2010;14(2):99–103.Google Scholar
  16. 16.
    Marnoor SA. Abuse deterrent opioid formulations: a review. Res J Pharm Dosage Forms Technol. 2016;8(2):135.Google Scholar
  17. 17.
    Boyce H, Smith D, Byrn S, Saluja B, Qu W, Gurvich VJ, et al. In vitro assessment of nasal insufflation of comminuted drug products designed as abuse deterrent using the vertical diffusion cell. AAPS PharmSciTech. 2018:1–14.Google Scholar
  18. 18.
    Severtson SG, Ellis MS, Kurtz SP, Rosenblum A, Cicero TJ, Parrino MW, et al. Sustained reduction of diversion and abuse after introduction of an abuse deterrent formulation of extended release oxycodone. Drug Alcohol Depend. 2016;168:219–29.PubMedGoogle Scholar
  19. 19.
    Katz N, Dart RC, Bailey E, Trudeau J, Osgood E, Paillard F. Tampering with prescription opioids: nature and extent of the problem, health consequences, and solutions. Am J Drug Alcohol Abuse. 2011;37(4):205–17.PubMedGoogle Scholar
  20. 20.
    Wening K, Schwier S, Stahlberg HJ, Galia E. Application of hot-melt extrusion technology in immediate-release abuse-deterrent formulations. J Opioid Manag. 2017;13(6):473–84.PubMedGoogle Scholar
  21. 21.
    Cicero TJ, Ellis MS, Kasper ZA. Relative preferences in the abuse of immediate-release versus extended-release opioids in a sample of treatment-seeking opioid abusers. Pharmacoepidemiol Drug Saf. 2017;26(1):56–62.PubMedGoogle Scholar
  22. 22.
    Iwanicki JL, Severtson SG, McDaniel H, Rosenblum A, Fong C, Cicero TJ, et al. Abuse and diversion of immediate release opioid analgesics as compared to extended release formulations in the United States. PLoS One. 2016;11(12):e0167499.PubMedPubMedCentralGoogle Scholar
  23. 23.
    Beaumont J, Cassidy TA, Oyedele N, Guenther S, Mickle TC. Characterizing abuse progression of immediate-release hydrocodone combination products. J Drug Issues. 2018:0022042618756691.Google Scholar
  24. 24.
    Yang Y, Wang H, Li H, Ou Z, Yang G. 3D printed tablets with internal scaffold structure using ethyl cellulose to achieve sustained ibuprofen release. Eur J Pharm Sci. 2018;115:11–8.PubMedGoogle Scholar
  25. 25.
    Goyanes A, Buanz AB, Hatton GB, Gaisford S, Basit AW. 3D printing of modified-release aminosalicylate (4-ASA and 5-ASA) tablets. Eur J Pharm Biopharm. 2015;89:157–62.PubMedGoogle Scholar
  26. 26.
    Okwuosa TC, Stefaniak D, Arafat B, Isreb A, Wan K-W, Alhnan MA. A lower temperature FDM 3D printing for the manufacture of patient-specific immediate release tablets. Pharm Res. 2016;33(11):2704–12.PubMedGoogle Scholar
  27. 27.
    Skowyra J, Pietrzak K, Alhnan MA. Fabrication of extended-release patient-tailored prednisolone tablets via fused deposition modelling (FDM) 3D printing. Eur J Pharm Sci. 2015;68:11–7.PubMedGoogle Scholar
  28. 28.
    Goole J, Amighi K. 3D printing in pharmaceutics: a new tool for designing customized drug delivery systems. Int J Pharm. 2016;499(1–2):376–94.PubMedGoogle Scholar
  29. 29.
    Goyanes A, Robles Martinez P, Buanz A, Basit AW, Gaisford S. Effect of geometry on drug release from 3D printed tablets. Int J Pharm. 2015;494(2):657–63.PubMedGoogle Scholar
  30. 30.
    Martinez PR, Goyanes A, Basit AW, Gaisford S. Influence of geometry on the drug release profiles of stereolithographic (SLA) 3D-printed tablets. AAPS PharmSciTech:1–7.Google Scholar
  31. 31.
    Administration UFD. Center for drug evaluation and research. Application number: 200534Orig1s000. Clinical pharmacology and biopharmaceutics review (s). 2010.Google Scholar
  32. 32.
    Kasim NA, Whitehouse M, Ramachandran C, Bermejo M, Lennernäs H, Hussain AS, et al. Molecular properties of WHO essential drugs and provisional biopharmaceutical classification. Mol Pharm. 2004;1(1):85–96.PubMedGoogle Scholar
  33. 33.
    Laboratories R. RIOMET (metformin hydrochloride) [package insert]. Jacksonville: Ranbaxy Laboratories Inc; 2017.Google Scholar
  34. 34.
    Pharma P. OXYCONTIN® (oxycodone hydrochloride) [package insert]. Stamford: Purdue Pharma L.P.; 2007.Google Scholar
  35. 35.
    Palekar S, Nukala PK, Mishra SM, Kipping T, Patel K. Application of 3D printing technology and quality by design approach for development of age-appropriate pediatric formulation of baclofen. Int J Pharm. 2018.Google Scholar
  36. 36.
    Patki M, Patel K. Development of a solid supersaturated self-nanoemulsifying preconcentrate (S-superSNEP) of fenofibrate using dimethylacetamide and a novel co-processed excipient. Drug Dev Ind Pharm. 2018;(just-accepted):1–44.Google Scholar
  37. 37.
    Lang B, McGinity JW, Williams RO. Hot-melt extrusion – basic principles and pharmaceutical applications. Drug Dev Ind Pharm. 2014;40(9):1133–55.PubMedGoogle Scholar
  38. 38.
    Hajare AA, Patil VA. Formulation and characterization of metformin hydrochloride floating tablets. Asian J Pharm Res. 2012;2(3):111–7.Google Scholar
  39. 39.
  40. 40.
    De Jaeghere W, De Beer T, Van Bocxlaer J, Remon JP, Vervaet C. Hot-melt extrusion of polyvinyl alcohol for oral immediate release applications. Int J Pharm. 2015;492(1–2):1–9.PubMedGoogle Scholar
  41. 41.
  42. 42.
    De Jaeghere W, De Beer T, Van Bocxlaer J, Remon JP, Vervaet C. Hot-melt extrusion of polyvinyl alcohol for oral immediate release applications. Int J Pharm. 2015;492(1):1–9.PubMedGoogle Scholar
  43. 43.
    Cailly-Dufestel V, Herry C, Bacon J, Oury P, Inventors; Google Patents, assignee. Crush-resistant tablets intended to prevent accidental misuse and unlawful diversion 2010.Google Scholar
  44. 44.
    Fransén N, Björk E, Nyström C. Development and characterisation of interactive mixtures with a fine-particulate mucoadhesive carrier for nasal drug delivery. Eur J Pharm Biopharm. 2007;67(2):370–6.PubMedGoogle Scholar
  45. 45.
    Bartholomäus J, Schwier S, Brett M, Stahlberg H, Galia E, Strothmann K. New abuse deterrent formulation (ADF) technology for immediate-release opioids. Drug Dev Deliv. 2013;13(8):76–81.Google Scholar
  46. 46.
    Food U, Administration D. Center for drug evaluation and research. Application number: 206162Orig1s000. Clinical pharmacology and biopharmaceutics review (s). 2014.Google Scholar
  47. 47.
    Kumar V, Dixon D, Tewari D, Wadgaonkar DB, inventors; Google Patents, assignee. Extended release opioid abuse deterrent compositions and methods of making same 2012.Google Scholar
  48. 48.
    Chobisa D, Patel K, Monpara J, Patel M, Vavia P. Development and characterization of an organic solvent free, proliposomal formulation of Busulfan using quality by design approach. Int J Pharm. 2018;535(1–2):360–70.PubMedGoogle Scholar
  49. 49.
    Mishra SM, Rohera BD. An integrated, quality by design (QbD) approach for design, development and optimization of orally disintegrating tablet formulation of carbamazepine. Pharm Dev Technol. 2017;22(7):889–903.PubMedGoogle Scholar
  50. 50.
    Saurí J, Millán D, Suñé-Negre J, Colom H, Ticó J, Miñarro M, et al. Quality by design approach to understand the physicochemical phenomena involved in controlled release of captopril SR matrix tablets. Int J Pharm. 2014;477(1–2):431–41.PubMedGoogle Scholar

Copyright information

© American Association of Pharmaceutical Scientists 2019

Authors and Affiliations

  • Pavan Kumar Nukala
    • 1
  • Siddhant Palekar
    • 1
  • Manali Patki
    • 1
  • Ketan Patel
    • 1
    Email author
  1. 1.Department of Pharmaceutical Sciences, College of Pharmacy and Health SciencesSt. John’s UniversityQueensUSA

Personalised recommendations