Extragenic suppressor mutations in ΔripA disrupt stability and function of LpxA
- 1.3k Downloads
Francisella tularensis is a Gram-negative bacterium that infects hundreds of species including humans, and has evolved to grow efficiently within a plethora of cell types. RipA is a conserved membrane protein of F. tularensis, which is required for growth inside host cells. As a means to determine RipA function we isolated and mapped independent extragenic suppressor mutants in ∆ripA that restored growth in host cells. Each suppressor mutation mapped to one of two essential genes, lpxA or glmU, which are involved in lipid A synthesis. We repaired the suppressor mutation in lpxA (S102, LpxA T36N) and the mutation in glmU (S103, GlmU E57D), and demonstrated that each mutation was responsible for the suppressor phenotype in their respective strains. We hypothesize that the mutation in S102 altered the stability of LpxA, which can provide a clue to RipA function. LpxA is an UDP-N-acetylglucosamine acyltransferase that catalyzes the transfer of an acyl chain from acyl carrier protein (ACP) to UDP-N-acetylglucosamine (UDP-GlcNAc) to begin lipid A synthesis.
LpxA was more abundant in the presence of RipA. Induced expression of lpxA in the ΔripA strain stopped bacterial division. The LpxA T36N S102 protein was less stable and therefore less abundant than wild type LpxA protein.
These data suggest RipA functions to modulate lipid A synthesis in F. tularensis as a way to adapt to the host cell environment by interacting with LpxA.
KeywordsExtragenic suppressor mutations Cell wall Enzyme mutation Enzyme mechanism Membrane protein RipA Francisella tularensis LpxA Lipid A biosynthesis UDP-N-acetylglucosamine
Francisella tularensis is a highly virulent Gram-negative bacterial pathogen that causes systemic infections in hundreds of animal species, including humans. Key pathogenic properties of F. tularensis are its ability to invade and replicate within many different host cell types and to suppress the initial host inflammatory response by innate immune cells. We previously identified a protein termed RipA, which is conserved among all sequenced Francisella species . RipA is dispensable for growth in minimal media, but is required for F. tularensis virulence in mouse models of infection . RipA is a homooligomeric cytoplasmic membrane protein that contains two cytoplasmic domains that are essential for RipA function . The ∆ripA strain infects host cells and escapes the phagosome entering the cytoplasm similar to wild type F. tularensis, but fails to replicate within the cytosol . Both transcription and translation of ripA are elevated at neutral pH coinciding with F. tularensis leaving the acidified vacuole and entering the neutral cytoplasm . The F. tularensis ∆ripA strain stimulates a robust host inflammatory response activating the inflammasome and MAPK pathways, a response that is not seen with wild type F. tularensis. In Francisella novicida, ∆ripA activates increased levels of AIM2-dependent pyroptosis, suggesting the bacterial membrane is compromised . Determining RipA function would provide an important insight into the specific mechanisms used by F. tularensis to grow within eukaryotic cells. Given the scant information obtained from bioinformatics analysis of RipA, and the eclectic group of organisms that express RipA-like proteins , we took genetic and biochemical approaches to determine RipA function. We isolated independent extragenic suppressor mutations of ∆ripA that restored intracellular growth, and all suppressor mutations mapped to either lpxA or glmU. Both lpxA and glmU encode essential enzymes involved in lipid A synthesis ,. Repairing the mutation in lpxA or glmU abrogated the suppressor phenotype supporting that the mutation in lpxA and glmU were responsible for the suppressor phenotype in their respective strains. LpxA is an essential UDP-N-acetylglucosamine acyltransferase that catalyzes the transfer of an acyl chain from acyl carrier protein (ACP) to UDP-N-acetylglucosamine (UDP-GlcNAc) to begin lipid A synthesis, which is the hydrophobic anchor of lipopolysaccharide (LPS) . The active site and substrate binding pocket of LpxA is well characterized in Escherichia coli. LpxA forms a trimer composed of three identical subunits with each subunit composed of two domains . The N- terminal domain forms a left-handed helix of short parallel β-sheets and the C-terminal domain is composed of four α-helices. The active site in LpxA is located in a cleft between the two subunits, and the amino acids essential for LpxA function in E. coli are K76, H122, H125, H144, M156, A158, H160, V171, G173, and R204 ,. E. coli LpxA has a strict preference for hydroxymyristoyl (C:14) fatty acids, and this preference is referred to as a hydrocarbon ruler . LpxA from F. tularensis shares 44% identity and 66% similarity with E. coli LpxA, but does not share the same preference for C:14 fatty acids . Instead, F. tularensis LpxA has evolved a relaxed acyl chain specificity and can attach longer fatty acids onto the 3′ hydroxyl acyl of UDP-GlcNAc: incorporating either hydroxystearoyl (3-OH C18:0), or hydroxypalmitoyl (3-OH C16:0) fatty acids. GlmU is also involved in the synthesis of lipid A. GlmU is an essential bifunctional acetyltransferase and an uridyltransferase that performs the last two sequential steps in the synthesis of UDP-GlcNAc. UDP-GlcNAc is an important component of both lipid A, and peptidoglycan.
Herein we describe the isolation and characterization of an extragenic suppressor mutation of ∆ripA in F. tularensis subspecies holarctica live vaccine strain (LVS) that mapped to lpxA and restored intracellular growth. We show that RipA and LpxA co-immunoprecipitate. Induced expression of lpxA in the absence of ripA is detrimental to bacterial growth, and the suppressor mutation LpxA T36N renders the protein less stable. In summary, F. tularensis acquires extragenic suppressor mutations in lpxA to restore intracellular growth in the absence of ripA.
Results and discussion
Extragenic suppressor mutation enrichment in the ∆ripA background
Polymorphisms detected by whole genome sequencing
ABC transporter ATP binding protein
wt, ΔripA, and S102
1023 bp from start
FTL_0539 ( lpxA )
Unique to S102
107 bp from start
FTL_0717 ( rne )
ΔripA, and S102
114 bp from start
FTL_1388 ( nadB )
wt, ΔripA, and S102
278 bp from start
To determine if the mutations identified by whole genome sequencing were unique to S102 and not just variations present in our laboratory strain, the regions of interest were PCR amplified and analyzed using wild type F. tularensis, ΔripA and ΔripA suppressor genomic DNA. All the strains tested had two polymorphisms, confirming that the laboratory strain is similar but not identical in sequence to the annotated genome online (NC_007880) (Table 1). The first polymorphism was a base pair change in FTL_0146, an ABC transporter ATP-binding protein that caused an R341L missense mutation. The second polymorphism was a point mutation in FTL_1388, a L-aspartate oxidase, leading to the missense A93T mutation. The ΔripA strain contained an additional missense mutation in FTL_0717, ribonuclease E, K38T. The missense mutation in ribonuclease E does not contribute the growth defect of the ΔripA strain, because the growth defect in this, and all other ΔripA strains, was restored by complementation with wild type ripA alone (data not shown).
The only unique mutation found in the suppressor strain S102, was located within FTL_0539, which encodes LpxA (Table 1). lpxA is located in an essential operon containing five genes involved in membrane synthesis. LpxA is an acyltransferase that catalyzes the first step in lipid A biosynthesis, using UDP-N-acetylglucosamine (UDP-GlcNAc) and acyl-ACP to synthesize the anchor of lipopolysaccharide. The polymorphism within lpxA was a point mutation leading to the substitution T36N. The amino acid substitution was located within the hexapeptide transferase domain close to the N-terminus, and was not within the active pocket. Thus, the location of the mutation is unlikely to alter the active pocket but could alter protein stability.
LpxA T36N and GlmU E57D rescued growth of ∆ripA in eukaryotic cells
LpxA and RipA co-immunoprecipitate
The extragenic suppressor mutation in lpxA does not alter membrane composition and LPS
There is substantial diversity among bacterial fatty acids profiles and F. tularensis is unique for its relative abundance of long chain saturated and monoenoic acids . F. tularensis LVS has a lipid content of 21% by dry weight, and the two major phospholipid components are phosphatidylethanolamine (PE; 76%) and phosphatidylglycerol (PG; 24%) . In F. tularensis PE contains a high proportion of 24:0 fatty acids, while PG contains mainly C18:0 and C22:0 fatty acids. Another unique property of the membrane composition of F. tularensis is the abundant amount of free lipid A present on the outer membrane of the bacteria that is not attached to O-antigen sugars . In F. novicida two forms of free lipid A were identified: one containing a galactosamine sugar attached to the 1′ phosphate position (compound A1), and the other containing a glucose sugar attached to the 6′ OH group on glucosamine (compound A2) . We analyzed the lipid profile of purified membrane fractions from wild type F. tularensis, ΔripA and S102 in order to identify any differences in the membrane composition between the strains. As reported previously, the most abundant components of the purified membrane fractions were PE, PG, phosphatidylcholine (PC), and lipid A (Additional file 3: Figure S3A) . We also observed similar quantities of free lipid A in F. tularensis LVS as seen in F. novicida, however no compound A2 was detected corresponding with a glucose sugar linked to the 6′ position of lipid A, confirming previous findings ,. In all broth grown strains analyzed, there was a similar composition of lipids as determined by thin layer chromatography (TLC) (Additional file 3: Figure S3A). Others have shown that F. tularensis membrane profiles changed during intracellular growth . To determine if RipA is involved in modifying the membrane during host infection, we purified bacterial membrane fractions from J774A.1 cells infected with either wild type F. tularensis LVS or ΔripA and subsequently analyzed the lipid profiles by TLC. We observed changes in the membrane composition of F. tularensis inside J774A.1 cells as compared to broth grown organisms, but the changes were not influenced by the absence of ripA (Additional file 3: Figure S3B). In addition, there were no consistent changes among the LPS banding pattern observed by Western blot (Additional file 3: Figure S3C), or in LPS quantity of wild type F. tularensis, ΔripA, and S102 measured by the purpald assay (Additional file 4: Figure S4) . Nor where there any changes in the lipid A profile between the different strains when analyzed by mass spectrometry (Additional file 5: Figure S5).
LpxA protein levels are significantly lower in the ΔripA strain compared to wild type
Inducing expression of LpxA negatively affects the ∆ripA strain
LpxA T36N is less stable than wild type LpxA and has reduced enzyme activity
Initial rate of LpxA-catalyzed acyl group transfer
Initial rate (μM/sec)
0.6648 ± 0.179
*P < 0.05
0.4408 ± 0.103
LpxA wt frozen
0.6155 ± 0.263
***P < 0.0001
LpxA T36N frozen
0.0509 ± 0.0196
These data demonstrate that the suppressor LpxA T36N is less stable and less active than wild type LpxA. In addition, the induced expression of lpxA in the absence of ripA is detrimental to bacterial growth. Together, these findings support the conclusion that the amount of LpxA protein is modulated by F. tularensis in a RipA dependent manner, and this control is important for adaptation to the intracellular environment.
The main goal of this study was to ascribe biological function to RipA, a key factor for F. tularensis intracellular growth, by isolating, mapping and characterizing an extragenic mutant S102. S102 and 4 other independently derived extragenic mutations mapped to lpxA or glmU. Both enzymes (LpxA and GlmU) are essential components of the lipid A biosynthesis pathway. By taking a multidisciplinary approach, combining genetics and biochemistry, we determined RipA influences LpxA stability in F. tularensis. What remains to be determined is the role RipA plays during intracellular growth, and how LpxA and RipA prime the bacteria to survive and withstand the host defenses that usually kill invading pathogens. Understanding RipA function provides an important insight into the specific mechanisms used by F. tularensis to modulate LpxA—the first enzyme in the lipid A biosynthesis pathway.
The suppressor mutation in S102 made LpxA less stable, and the induced expression of wild type lpxA in the absence of ripA inhibited bacterial growth, supporting the conclusion that the interaction between RipA and LpxA is critical for controlling the first step in the lipid A synthesis pathway of F. tularensis. The tight regulation of the lipid A biosynthesis pathway may be important for adapting the membrane to withstand host environmental stresses. A decrease in the activity of LpxA may stimulate the phospholipid biosynthetic pathway to divert the pool of hydroxyacyl-ACP more towards the synthesis of phosphatidylethanolamine. Homoviscous adaptation is critical for bacteria to respond to environmental changes, such as in temperature, osmolality, salinity and pH . Phosphatidylethanolamine and phosphatidylglycerol are the two major phospholipids present in F. tularensis contributing to 21% of the dry weight of the bacteria, which is high relative to other bacteria, and may allow F. tularensis to resist a diverse array of host defenses . Recycling of the phospholipids and sugars that are used as intermediates in the synthesis of outer membrane components is critical for bacterial bilayer stability during peak infection, and is a tightly regulated process. During intracellular growth, when long chain fatty acids are in short supply it may be critical to control the lipid A synthesis pathway so phospholipid synthesis can continue. For example, LpxC (the second step in lipid A biosynthesis) is proteolyticly regulated by FtsH to control its activity . The phospholipid acyl chains determine the viscosity of the membrane; with unsaturated chains providing more membrane fluidity and long saturated chains provide more rigidity . F. tularensis lipid A and phospholipids are composed of much longer fatty acid chains than in E. coli, which could in part help F. tularensis adapt to the intracellular environment.
In conclusion, we have identified a new protein involved in modulating lipid A synthesis, which may be an important player in membrane remodeling during host cell infections. However, the precise changes in F. tularensis membrane composition during intracellular growth need to be further characterized.
All bacterial strains, plasmids, and primers used in this study are listed in Additional file 6: Table S1. F. tularensis subsp. holarctica LVS was obtained from Ft. Collins, CO. Francisella strains were maintained on chocolate agar supplemented with 1% IsoVitalex (BD), Chamberlains defined media (CDM) , or in BHI supplemented with 1% IsoVitalex at 37°C.
Whole genome sequencing and PCR verification
Genomic DNA was purified from 10 ml cultures of F. tularensis grown in CDM using the MasterPure DNA purification kit (Epicentre). DNA was dissolved in 200 μl of EB buffer at 50 ng μl−1 and submitted for whole genome sequencing at the High-Throughput Sequencing Facility at the University of North Carolina at Chapel Hill. Using the Genome Analyzer IIx (Illumina) we produced 36 bp single-end reads that were mapped to the annotated genome on NCBI (NC_007880). By aligning the reads from the suppressor mutant strain to this reference we could identify the suppressor mutation. Alignments were made using SOAP with default parameters. Average sequence coverage was over 50 for the 1.89 Mb genome . Single nucleotide polymorphisms, deletions and insertions were located using SOAP and BLAT . A total of 4 mutations and 55 zero coverage regions were identified. Mutations also present in our wild type laboratory strain and the ΔripA strain were discarded as background mutations, leaving one unique mutation present in S102. To verify all polymorphisms detected by Illumina sequencing we PCR amplified the regions of interest and sequenced all strains including wild type F. tularensis, ΔripA, and all suppressors (Genewiz, Inc.). Following further confirmatory sequencing all but one mutation were eliminated as background mutations.
Gentamicin protection assay
J774A.1 macrophage-like cells and TC-1 epithelial cells were inoculated with LVS at a multiplicity of infection (MOI) of 100. All LVS strains were grown overnight in CDM prior to inoculation. The cells were incubated with the bacterial inoculum for 2 hours (J774A.1) or 4 hours (TC-1) and then incubated with media containing 25 μg ml−1 gentamicin to kill extracellular bacteria. At 4 hours (J774A.1) or 6 hours (TC-1), and at 24 hours post infection medium was removed, cells were scraped from the plate, serially diluted in PBS, and plated to determine the number of viable bacteria. To enrich for extragenic suppressor mutations in ΔripA the infection was extended to 36 hours before bacteria were enumerated.
Extragenic suppressor repair using allelic exchange
The lpxA (FTL_0539) allele plus 100 bp of flanking DNA was PCR amplified from F. tularensis LVS genomic DNA. The amplified fragment was cut with BamHI and NotI and ligated into the SacB suicide vector, pMP812 . Allelic exchange was achieved by transformation, selection for plasmid co-integration, and counter selection on media containing 10% sucrose. DNA sequencing confirmed replacement of the mutant allele with the wild type .
Co-immunoprecipitation of LpxA and RipA
LpxA-HA was immunoprecipitated from mid-exponential phase F. tularensis LVS expressing lpxA-HA on a plasmid grown in CDM and pelleted by centrifugation at 13,000 × g for 5 minutes. Bacterial pellets were lysed using 150 mM NaCl, 1% Triton X-100, 50 mM Tris HCl (pH 8.0) and incubated for 30 minutes while shaking. Cell debris was removed by centrifugation for 5 minutes at 13,000 × g. Protein lysates were then incubated with 80 μl of μMACS™ Anti-HA MicroBeads (Miltenyi Biotec) for 30 minutes at 4°C. Following the manufacturers protocol, the proteins bound to the μMACSTM Anti-HA MicroBeads (Miltenyi Biotec) were loaded onto the μ column in the magnetic field of the μMACS separator. The column was washed with 5 column volumes of 150 mM NaCl, 1% Igepal CA-630, 0.5% sodium deoxycholate, 0.1% SDS, and 50 mM Tris HCl (pH 8.0) and the protein bound to LpxA-HA were eluted using hot 50 mM Tris HCL (pH 6.8), 50 mM DTT, 1% SDS, 1 mM EDTA, 0.005% bromphenol blue, and 10% glycerol. All samples were analyzed by SDS-PAGE and Western blot. Immunoprecipitation was performed on lysates of the strain with ripA-HA integrated in the chromosome and lpxA-V5 on a plasmid (Additional file 6: Table S1, SKI22) as described above following the manufacturer’s protocol for μMACS™ Epitope Tag Protein Isolation Kit (Miltenyi Biotec).
Membranes were fractionated as described previously by ultracentrifugation and Sarkosyl extraction . Briefly, mid-exponential phase bacteria were lysed by bead beating two times for 45 seconds using Lysing Matrix Tubes (MP Biomedicals). The lysates were clarified at max speed in a microcentrifuge for 5 minutes and crude membranes pelleted by ultracentrifugation for 2 hours at 100,000 × g. To enrich for cytoplasmic membranes from the pelleted crude membrane fraction 0.5% Sarkosyl was added overnight to selectively solubilize the inner membrane. The outer membrane was separated from the inner membrane by ultracentrifugation for 1 hour at 100,000 × g.
Membrane purification and thin layer chromatography
F. tularensis 100 ml cultures were grown to optical density of 1.0 (OD600) or a T225 flask of J774A.1 cells were infected with F. tularensis at an MOI of 500. The bacteria were harvested by centrifugation and washed twice with PBS. The pellet was suspended in 8 ml of PBS. To the cell suspension 10 ml of chloroform and 20 ml of methanol were added to form a single phase (chloroform, methanol, and aqueous ratio of 1:2:0.8, v/v/v) as previously described . After one hour of incubation at room temperature, the insoluble debris was removed by centrifugation at 3000 × g for 30 minutes. The supernatants were transferred to clean solvent-resistant bottles, and 10 ml of chloroform and 10 ml of PBS were added to generate a two-phase system. After mixing, the samples were centrifuged at 3000 × g for 15 minutes, and the lower phase and interface was collected. Samples were dried under a stream of nitrogen or in a speed vac. Thin layer chromatography was performed on purified membrane fractions dissolved in a total of 10 μl of chloroform and methanol (4:1) and spotted onto a silica gel 60 Å chromatography plate (Whatman). The plate was developed in the solvent chloroform, methanol, water, and acetic acid (25:15:4:2, v/v/v/v) and sprayed with 10% sulfuric acid in ethanol and charred at 100°C for 20 minutes.
Mini-Protean® TGX™ 4–20% precast gels (BioRad) were loaded with equal amounts of total protein from indicated samples and run at 250 V using Tris-glycine SDS running buffer. For Western blot assays, gels were transferred to nitrocellulose membranes and then blocked overnight with 1% bovine serum albumin in PBS-Tween 20. All antibodies were incubated at room temperature for 2 hours then washed with 3 volumes of PBS-Tween 20. The primary antibodies used were goat anti-RipAaa1-19, mouse anti-HA monoclonal antibody (Sigma), mouse anti-V5 monoclonal antibody (Sigma), mouse anti-F. tularensis LPS (US Biologicals F6070-C2), monoclonal anti-IglC (BEIresources NR-3196), monoclonal anti-IglB (BEIresources NR-3195). The secondary antibodies used were goat anti-rabbit IgG IRDye 680CW and 800CW or goat anti-mouse IgG IRDye 680CW and 800CW. Proteins were detected using near infrared fluorescence at 700 nm or 800 nm with the Odyssey Infrared Imaging System (LI-COR Biosciences).
Lipid A purification
F. tularensis 100 ml cultures were grown to OD600 of 1.0. The cells were harvested by centrifugation at 10,000 × g for 10 minutes in a RC5C centrifuge with the GSA rotor (Sorvall Instruments). Cells were resuspended in 10 ml of TE buffer with 50 μg ml−1 proteinase K and incubated for one hour at 65°C. LPS was precipitated with 0.3 M sodium acetate and three volumes of 100% ethanol after incubation at −20°C for 2 hours, the LPS was centrifuged for 10 minutes at 10,000 × g as previously described . The pellet was suspended in 5 ml of water and LPS was precipitated with ethanol and sodium acetate a second time. The LPS pellet was suspended in 5 ml of water with 20 μg ml−1 each of DNase and RNase and incubated for 2 hours at 37°C. Both 5 ml of LPS and 5 ml of phenol were warmed separately to 65°C then combined, mixed by vortexing, and incubated at 65°C for 30 minutes. LPS was then cooled on ice and centrifuged at 2000 × g for 10 minutes in an Allegra 6R centrifuge (Beckman Coulter). The aqueous layer and interface were collected. LPS was then ethanol precipitated 3× as above with 0.3 M sodium acetate and 100% ethanol. The LPS pellet was then suspended in 5 ml of 1% acetic acid and incubated at 100°C for three hours to separate the O-antigen from lipid A. Samples were then centrifuged at 14,000 × g for 30 minutes in a 5424 centrifuge (Eppendorf). The lipid A pellet was washed in water and centrifuged again for 30 minutes at 14,000 × g. The lipid A pellet was suspended in 60 μl of water. Then 50 μl of methanol, and 100 μl of chloroform was added to the lipid A pellet and centrifuged at 8,000 × g for 10 minutes. The bottom organic layer and the interface were collected.
Positive ion mode mass spectrometry on Lipid A
Purified Lipid A samples were analyzed using a matrix-assisted laser desorption ionization fourier transform mass spectrometer (MALDI-FTMS). Spectra were obtained in a positive-ion mode using 1:1 matrix of methanol to 2,-5 dihydrozybenzoic acid (DHB). Lipid A samples were dissolved into (3:1, v/v) chloroform and methanol.
Total RNA was isolated from mid exponential phase cultures using RiboPure-Bacteria kit (Ambion) adding TRIzol, bead beating, and then adding chloroform to separate the aqueous phase containing the RNA. DNA was removed using DNase (Promega) for 30 minutes at 37°C. Quantitative reverse transcriptase PCR (qRT-PCR) was performed in a 96-well format using the SensiFAST SYBR One-Step Kit (Bioline) following the manufacturer’s protocol. Thermocycling and detection were performed using the iCycler thermal cycler (Bio-Rad). Both a positive control using a genomic DNA ladder and a negative control with no reverse transcriptase was analyzed for each run. All lpxA starting quantity (SQ) values were normalized to the mean SQ values for gyrA. Data represent three independent experiments performed in triplicate. Significance was determined using an unpaired two-tailed t-test with unequal variance.
Anhydrotetracycline inducible gene expression system for lpxA and ripA
The E. coli-F. tularensis shuttle vector was created with lpxA under the control of the rpsLp-tetR as previously described . The E. coli-F. tularensis shuttle vector containing ripA or lpxA was introduced into wild type LVS and the ∆ripA strain via electroporation as described previously . Transformants were selected on chocolate agar supplemented with 1% IsoVitalex and 200 μg ml−1 Hygromycin B (Hyg; Roche Applied Sciences). In F. tularensis, 100 ng ml−1 of anhydrotetracycline (ATc; Sigma-Aldrich) was used to induce expression of lpxA or ripA as previously described .
where ΔA is the change is CD spectra obtained from 260 to 190 nm, C is the molar concentration of LpxA, and I the cell path length. Following polarimetric conversions molar ellipticity was reported in degrees cm2 dmol−1. Spectra were measured at least three times with independent biological replicates.
LpxA-His6 purification for enzyme assay
Strains of interest were inoculated into 500 ml of Luria-Bertani (LB) medium containing 100 μg ml−1 of Ampicillin and were incubated while shaking at 37°C until an OD600 of 1.0 was reached. The cultures were induced with 1 mM IPTG followed by incubation at 25°C for four hours. Cells were harvested by centrifugation at 10,000 × g for 10 minutes at 4°C, and processed immediately or frozen at −80°C. Cells were resuspended in 6 ml of 20 mM Hepes, 100 mM NaCl at pH 8.0. Cell suspensions were disrupted by French press at 20,000 psi. Cellular debris was removed by centrifugation at 14,000 × g for 5 minutes at 4°C in a 5424 centrifuge (Eppendorf). Soluble crude cytosol was loaded onto 3 ml of nickel-nitriol-triacetic acid (Ni-NTA) resin (Qiagen). The resin was washed with 10 column volumes of loading buffer containing 500 mM NaCl and then eluted with 20 mM Hepes and 500 mM imidazole (pH 8.0). Purified F. tularensis LpxA-His6 was desalted using Slide-A-Lyzer Dialysis Cassette (Thermo Scientific) and dialyzed against 20 mM Hepes pH 8.0. Protein concentrations were determined by bicinchoninic acid (BCA) assay. The purification, and acylation of holo-ACP was carried out as described previously, except hydroxypalmitic acid (C16:0) was used in place of hydroxymyrstic acid (C14:0) .
Fluorescence enzyme assay for LpxA-His6
Following the procedure developed by Dotson and Jenkins, the assay was performed at 25°C in 20 mM Hepes (pH 8.0) at a final volume of 100 μl monitoring the conversion of ThioGlo 1(methyl 10-(2,5-dioxo-2,5-dihydro-1H-pyrrol-1-yl)-9-methoxy-3-oxo-3H-benzo[f]chromene-2-carboxylate) to ThioGlo-ACP produced in the LpxA acyltransferase-catalyzed reaction . To the appropriate well 40 μM of acyl-ACP, 4 mM UDP-GlcNAc, and 10 μM ThioGlo were added. To initiate the reaction, 10 nM LpxA-His6 was added directly to the well and mixed gently. The SpectraMax M2e plate reader (Molecular Devices) was used to continuously monitored at λex = 379 nm and λem = 513 nm for 10 minutes at 15 second intervals. Control reactions lacking individual substrate or enzyme components were performed to demonstrate that an increase in fluorescence was both enzyme and substrate dependent. To calculate initial rates linear regression plots were generated for the first two minutes of the reaction. The fluorescence enzyme assay was repeated at least three times with independent biological replicates.
This research was supported by NIH grant A1082870 to T.H.K.
We would like to thank Sarab Habibi in the Department of Chemistry (University of North Carolina at Chapel Hill) for his help running the mass spectrometry on purified lipid A. We would like to thank Christian Raetz and Jinshi Zhao for their help analyzing the purified membrane fractions by thin layer chromatography at Duke University. We would like to thank Ashutosh Tripathy at the Department of Biochemistry and Biophysics (University of North Carolina at Chapel Hill) for his help obtaining the circular dichroism spectra. We would like to thank Corey Quackenbush for his technical assistance with the figures (Department of Genetics at the University of North Carolina at Chapel Hill).
- 4.Huang MTH, Mortensen BL, Taxman DJ, Craven RR, Taft-Benz S, Kijek TM, Fuller JR, Davis BK, Allen IC, Brickey WJ, Gris D, Wen H, Kawula TH, Ting JPY: Deletion of ripA Alleviates Suppression of the Inflammasome and MAPK by Francisella tularensis. J Immunol. 2010, 185: 5476-5485. 10.4049/jimmunol.1002154.PubMedCentralCrossRefPubMedGoogle Scholar
- 5.Peng K, Broz P, Jones J, Joubert LM, Monack D: Elevated AIM2-mediated pyroptosis triggered by hypercytotoxic Francisella mutant strains is attributed to increased intracellular bacteriolysis. Cell Microbiol. 2011, 13: 1586-1600. 10.1111/j.1462-5822.2011.01643.x.PubMedCentralCrossRefPubMedGoogle Scholar
- 12.Phillips NJ: Schilling B. 2004, McLendon MK, Novel modification of lipid A of Francisella tularensis. Infection and immunityGoogle Scholar
- 13.Jantzen BPBTO E: Cellular fatty acid composition of Francisella tularensis. J Clin Microbiol. 1979, 10: 928-Google Scholar
- 16.Schilling B, McLendon MK, Phillips NJ, Apicella MA, Gibson BW: Characterization of Lipid A Acylation Patterns in Francisella tularensis, Francisellanovicida, and FrancisellaphilomiragiaUsing Multiple-Stage Mass Spectrometry and Matrix-Assisted Laser Desorption/Ionization on an Intermediate Vacuum Source Linear Ion Trap. Anal Chem. 2007, 79: 1034-1042. 10.1021/ac061654e.PubMedCentralCrossRefPubMedGoogle Scholar
- 18.Lee CH, Tsai CM: Quantification of bacterial lipopolysaccharides by the purpald assay: measuring formaldehyde generated from 2-keto-3-deoxyoctonate and heptose at the inner core …. Analytical Biochemistry 1999, 267(1):161–168. doi:10.1006/abio.1998.2961.Google Scholar
This article is published under license to BioMed Central Ltd. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/4.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly credited. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.