Reducing rigid-body error in a functional technique to determine ankle joint axes
- 931 Downloads
KeywordsMarker Position Ankle Joint Motion Joint Axis Healthy Adult Subject Talocrural Joint
Functional methods of finding joint axes of rotation involve tracking the movement of one bone at a joint relative to another and subsequent calculation of the joint axis position and orientation from the locations of skin-mounted markers. van den Bogert et al.  proposed a functional method of deter-mining the non-weight bearing axes of the ankle joint complex. Their subjects performed a full range of motion at the ankle with markers on the shank and shoe. The tech-nique implemented an optimisation algorithm to fit a kinematic model of the subtalar and talocrural joints to the experimentally ac-quired motion data. Soft tissue movement and associated marker movement was re-ported to be a significant source of error. The aim of the present study was to investigate how this skin movement error might be reduced through a better selection of marker positions.
Seven healthy adult subjects (5 female and 2 male, age range 16–36) with no history of foot or ankle joint problems participated in the study. Spherical reflective markers were located at eleven anatomical landmarks on the shank and foot (without shoe) [1, 2] of ten lower limbs. Three-dimensional spatial data was collected with a 12-camera Vicon MX (Vicon Motion Systems, Oxford, UK) as subjects performed plantar- and dorsi-flexion, pronation-supination, and circumduction . Static trials were performed with the foot in both a weight-bearing and a non-weight bearing condition.
The best-fit rigid-body transformations for the shank and foot segments for all motions were calculated using the method of Söder-kvist and Vedin . The reference position for the calculations was taken to be the static trial, first weight-bearing and then non-weight bearing. Skin marker movement during motion was estimated for all combinations of three markers located on the shank and all combinations of three markers located on the foot. This was done by comparing the actual marker positions to those predicted by the best-fit rigid-body transformations .
Skin movement error in tracking ankle joint motion can be reduced through a better selection of marker positions. This in turn should lead to a more accurate prediction of the motion axes of the ankle joint complex.
This article is published under license to BioMed Central Ltd.