A pair of new BAC and BIBAC vectors that facilitate BAC/BIBAC library construction and intact large genomic DNA insert exchange
- 8.2k Downloads
Large-insert BAC and BIBAC libraries are important tools for structural and functional genomics studies of eukaryotic genomes. To facilitate the construction of BAC and BIBAC libraries and the transfer of complete large BAC inserts into BIBAC vectors, which is desired in positional cloning, we developed a pair of new BAC and BIBAC vectors.
The new BAC vector pIndigoBAC536-S and the new BIBAC vector BIBAC-S have the following features: 1) both contain two 18-bp non-palindromic I-Sce I sites in an inverted orientation at positions that flank an identical DNA fragment containing the lac Z selection marker and the cloning site. Large DNA inserts can be excised from the vectors as single fragments by cutting with I-Sce I, allowing the inserts to be easily sized. More importantly, because the two vectors contain different antibiotic resistance genes for transformant selection and produce the same non-complementary 3' protruding ATAA ends by I-Sce I that suppress self- and inter-ligations, the exchange of intact large genomic DNA inserts between the BAC and BIBAC vectors is straightforward; 2) both were constructed as high-copy composite vectors. Reliable linearized and dephosphorylated original low-copy pIndigoBAC536-S and BIBAC-S vectors that are ready for library construction can be prepared from the high-copy composite vectors pHZAUBAC1 and pHZAUBIBAC1, respectively, without the need for additional preparation steps or special reagents, thus simplifying the construction of BAC and BIBAC libraries. BIBAC clones constructed with the new BIBAC-S vector are stable in both E. coli and Agrobacterium. The vectors can be accessed through our website http://GResource.hzau.edu.cn.
The two new vectors and their respective high-copy composite vectors can largely facilitate the construction and characterization of BAC and BIBAC libraries. The transfer of complete large genomic DNA inserts from one vector to the other is made straightforward.
KeywordsBAC BIBAC positional cloning Agrobacterium maize
List of abbreviations
bacterial artificial chromosome
transformation-competent artificial chromosome
Yeast artificial chromosome IPTG: Isopropyl-β-D-thiogalactoside
High-quality, deep-coverage, large-insert genomic libraries are important tools for structural and functional genomics studies of eukaryotic genomes. The BAC (bacterial artificial chromosome) cloning system  has been used to construct the most of such genomic libraries for different organisms that include important crops and model plants, such as rice [2, 3], maize , wheat , soybean , barley  and Arabidopsis . BAC libraries have been used for physical mapping [3, 6, 9], BAC to BAC genome sequencing [8, 10, 11], positional cloning [12, 13, 14, 15, 16], comparative genomics [17, 18], and genome assemblies of whole genome shotgun sequences  and next-generation sequences . To facilitate the positional cloning of plant genes, BIBAC (binary BAC) and TAC (transformation-competent artificial chromosome) vectors were developed to clone and transfer large-insert DNA fragments into plants via Agrobacterium-mediated transformation [21, 22]. The BIBAC vector contains the BAC vector backbone that uses the F-plasmid origin for replication in E. coli. The TAC vector uses the E. coli bacteriophage P1 origin for replication in E. coli. Both vectors use the single-copy Ri origin from Agrobacterium rhizogenes for replication in Agrobacterium. Several BIBAC and TAC libraries have been constructed such as those for rice [23, 24, 25, 26], chickpea , tomato [25, 28], sunflower , Arabidopsis [22, 30], wheat  and banana . However, although in addition to positional cloning BIBAC and TAC libraries could be also used for general purposes such as physical mapping and genome sequencing that BAC libraries are used for, BAC libraries were more popularly used than BIBAC and TAC libraries because the BIBAC and TAC vectors (~23 kb) have a larger size than the BAC vector (~7.5 kb), which increases difficulties for large DNA fragment library construction  and costs for repeated shotgun sequencing of the vector sequences. For the positional cloning of genes, re-cloning of BAC inserts into BIBAC or TAC vectors is often required for gene function complementation [13, 14, 15, 33].
The vectors and technologies associated with the construction of large genomic DNA fragment libraries are constantly improving. Before the BAC cloning system  was established, the YAC (Yeast artificial chromosome) cloning system  was used. However, the YAC cloning system had several disadvantages, such as high levels of chimerism and difficulty of handling. The BAC cloning system overcomes many of these disadvantages and advanced methods for the construction of BAC libraries have been developed [35, 36, 37, 38]. The BAC vector uses the F-plasmid origin of replication in E. coli and has a low copy number (1-2 copies per cell). While a low-copy replication is considered important for the stable maintenance of large DNA fragments in E. coli, vector preparation was difficult due to the low yield of DNA. To facilitate the preparation of vector DNA, BAC vectors have been modified using different strategies. Frengen et al.  constructed a high-copy BAC vector (pBACe3.6) by inserting the high-copy pUC vector into the cloning site of the BAC vector (a pBAC108L-derivative). The original BAC vector can be recovered from large-scale DNA preparations of pBACe3.6 and used for the construction of BAC libraries. However, because the pBACe3.6 colonies cannot be distinguished from the recombinant BAC clones by selection, care must be taken to avoid the contamination of the BAC library with the high-copy pBACe3.6 vector . Wild et al.  engineered a conditional amplification system for the BAC vector. These researchers inserted a high-copy replication origin, oriV, into the BAC vector and inserted the gene coding for TrfA replication protein under the control of the inducible araC-Para BAD promoter/regulator system into the host genome. Replication at oriV is dependent on the expression of TrfA. Following the induction of TrfA protein expression by L-arabinose, the BAC vector or the BAC clones that were constructed using this vector replicated at a high copy number. The vector is approximately 500 bp larger than the original BAC vector and only functions within the engineered host cells. Previously, we constructed a high-copy composite BAC vector, pCUGIBAC1, which contains the low-copy BAC vector pIndigoBAC536 ligated to the high-copy vector pGEM-4Z [37, 41]. As a vector, most important is that it can be distinguished from the recombinant clones by selection. Two special features assured the composite vector pCUGIBAC1 of a reliable vector. First, the pIndigoBAC536 and the high-copy pGEM-4Z vectors each contain a lacZ gene of the same origin. Therefore, of the two ligation products between the two vectors (head-head and head-tail), one ligation product (head-tail) can reconstitute two lacZ gene copies. Second, of the two ligation products, only one can replicate in E. coli. The pCUGIBAC1 took the advantages of both features and so the grown colonies were all blue on X-gal-containing selection medium . The pCUGIBAC1 replicated at a high-copy number and largely facilitated BAC vector preparations. The pCUGIBAC1 DNA can be digested with Hin dIII, Bam HI or Eco RI to produce linearized forms of the original pIndigoBAC536 and pGEM-4Z vectors . Therefore, linearized and dephosphorylated form of the original BAC vector pIndigoBAC536 that retains all of its original features can be prepared from the high-copy composite vector pCUGIBAC1 by restriction digestion without the need for additional preparation steps or special reagents. Because any self- or inter-ligation products of the pIndigoBAC536 and the pGEM-4Z fragments regenerate the pIndigoBAC536, pGEM-4Z or pCUGIBAC1 plasmids, whose transformants are all blue and distinguishable from the recombinant BAC clones (white) on X-gal-containing selection medium, trace amounts of the pCUGIBAC1 and/or the pGEM-4Z fragments trapped during the preparation of the pIndigoBAC536 vector will not cause contamination of the BAC libraries . The pIndigoBAC536 vector prepared from the pCUGIBAC1 was used to construct many BAC libraries such as those for 12 Oryza species , nurse shark , zebra finch  and 19 Drosophila species .
However, despite these developments, vectors that are currently available for the construction of large-insert genomic libraries still have limitations. It is difficult to obtain enough BIBAC plasmid DNA for vector preparation and there have been no attempts to modify the BIBAC vector to increase its copy number. Commonly used BAC and BIBAC vectors contain two Not I restriction sites that flank the multiple cloning sites for insert sizing and releasing. Not I is a rare-cut restriction enzyme that recognizes the 8-bp sequence GCGGCCGC. Not I digestion of BAC/BIBAC clones of libraries originating from organisms with low GC content results in a few large insert bands per clone when viewed on a CHEF gel. However, for BAC/BIBAC clones that originate from organisms with high GC content, such as monocotyledonous plants, Not I digestion produces many small DNA fragments per clone and therefore, insert sizing is difficult and transfer of intact inserts from one vector to another is almost impossible [32, 33, 45]. Insert sizing is an important step that determines the quality of large DNA fragment libraries  and for comparative genomics . Genome expansions and contractions can be estimated by comparing the actual insert sizes of the BAC contigs to the corresponding regions of a reference sequence . Because genetic mapping usually cannot locate a gene in a narrow region , without a method to re-clone large BAC inserts into the BIBAC vector in one piece, the large BAC inserts must be fragmented and sub-cloned into a binary vector, and the individual sub-clones should be used to transform plants [32, 33]. This process contributes to an increase in the labor, costs and complexity of the procedure. The TAC vector series [22, 23, 25] contains two 18-bp recognition sites for the homing endonuclease I-Sce I that flank the cloning site and the plant selection marker. The I-Sce I sites can be used for insert sizing of the TAC libraries and to examine the integrity of the transferred inserts in the transgenic plants by digesting DNA from putative transgenic plants with I-Sce I and hybridizing with a probe for the plant selection marker. The TAC vector series also contains a P1 lytic replicon, and the copy number can be amplified by releasing the suppresser of the P1 lytic replicon with IPTG (Isopropyl-β-D-thiogalactoside) . However, the I-Sce I sites cannot be used to directly clone DNA sequences or to re-clone the BAC inserts for Agrobacterium-mediated transformation because the plant selection marker is not located on the vector backbone.
In this study, we constructed a pair of BAC and BIBAC vectors that overcome the above limitations.
Construction of new BAC and BIBAC vectors
Utility demonstration of the new BAC and BIBAC vectors
Stability of BIBAC clones in E. coli and Agrobacterium
We constructed a pair of new BAC and BIBAC vectors that can facilitate the construction of large DNA fragment libraries and the release and exchange of intact large DNA inserts between the two vectors.
Previously available BAC and BIBAC vectors usually use Not I digestion for insert sizing and release. For large DNA-insert BAC and BIBAC clones from high GC content organisms or monocotyledonous plant genomes, digestion with Not I cuts each insert into several to many fragments, making insert sizing difficult and the release of intact inserts almost impossible. Although the available BAC and BIBAC vectors also contain lambda cosN and P1 loxP sites [1, 47] that may not be present in the cloned genomic DNA inserts, these sites are located on the same side of the cloning site and cannot be used to release the inserts. Even though these sites could be used to linearize BAC and BIBAC plasmids, insert sizing that depends on linearizing is not reliable because without the presence of a second band as reference, e.g., the vector band, it is impossible to determine if the plasmids have been linearized successfully. On a CHEF gel, a circular plasmid migrates more slowly than its linear form (our experience) and can lead to the overestimation of plasmid size. Hurwitz et al.  estimated BAC insert sizes of large contigs of three genomes closely related to rice by mechanically semi-linearizing plasmids to investigate structural variations between the rice and its closest relatives. In this case, each sample produced two bands (circular and linear forms) on CHEF gels and the lower band (linear form) was used for size determination. However, careful optimization of the method is critical, and repeated experiments may be frequently required to generate two bands in each sample.
We created two I-Sce I sites that flank the cloning site in both BAC and BIBAC vectors to release and exchange intact large DNA inserts. When the I-Sce I recognition sequence was used to search the genome sequence database, no any sites were found in Arabidopsis and the rice Nipponbare genomes, and only two sites were found in the maize B73 genome. Every BAC and BIBAC clone, irrespective of how large an insert it contains, will release only one insert band (with the exception of the few sites in maize or, possibly, in other genomes), making insert sizing simple. More importantly, intact inserts can be exchanged easily and efficiently between BAC and BIBAC vectors because these vectors use different antibiotic selection markers and both produce the same non-complementary 3' protruding ATAA ends by I-Sce I that suppress self- and inter-ligations (Figure 1). Purification of the insert from one vector, which is difficult for large DNA fragments, is not required before ligation into the other vector. Re-cloning of BAC inserts into the BIBAC vector is usually required for gene function complementation. Our recently constructed BAC libraries were constructed using our new BAC vector http://GResource.hzau.edu.cn and allow the convenient transfer of inserts. Our BIBAC vector, which has retained the two Not I sites flanking the cloning site, can be used to sub-clone inserts from BAC clones that were constructed using other BAC vectors (Figure 1). However, because the backbone BIBAC vector prepared with Not I can self-ligate and can host multiple small fragments but does not include the laz Z gene for recombinant clone selection, both the efficient dephosphorylation of the vector (to prevent self-ligation) and deep screening for clones of interest are required.
BAC libraries, especially those for very important basic and public applications such as physical mapping and BAC by BAC genome sequencing, are usually arrayed and stored in single clones in 384-well plates. The arrayed clones have a possibility to be contaminated by other BAC clones during picking, replicating and repeatedly using. If a well contains two or more clones by contamination, the sample from the well will fail to produce BAC end sequences and will produce fingerprints that cause misassemblies of contigs. Therefore, the rate of contaminated wells should be an important parameter for the quality of BAC libraries. However, all the previously published BAC libraries except for the barley BAC libraries published recently , to our knowledge, were not evaluated for this parameter due to the technical difficulty. Schulte et al.  reported 5 barley BAC libraries that were constructed with genomic DNA fragments prepared using different restriction enzymes or mechanical shearing. These authors produced fingerprint files for about 10,000 wells of each library and compared the fingerprint files between neighboring wells of the same plate or between the identical wells of the neighboring plates. The well was considered to be potentially contaminated if its fingerprint profile contains > 50% of fragments identical to the other fingerprint profile. From one BAC library that was constructed earlier, the potential neighbor and plate-wide contamination were estimated to be 2.73% and 7.28%, respectively. From the newly constructed four BAC libraries, the potential neighbor and plate-wide contamination were estimated to be from 1.01% to 2.09%, and from 1.44% to 5.76%, respectively. However, this method may not be practical to most BAC libraries. Fingerprinting is a costly work and so before that the quality of the BAC library should be already determined. Also, this method determines the potential contamination of a well depending on not only the fingerprint profile of this well but also the fingerprint profiles of the contamination source wells. With this method, the wells that are contaminated by non-arrayed clones or by the arrayed clones that do not have successful fingerprint profiles cannot be determined. Our new vectors can solve the problem. For the BAC and BIBAC libraries constructed with our new vectors, rates of wells that contain two or more clones can be estimated during quality evaluation of the library with I-Sce I. If the DNA sample of a well produces two or more insert fragments by I-Sce I digestion, the well can be considered to contain two or more clones. If necessarily, the inserts of the single colonies streaked out from the flagged well can be re-analyzed with I-Sce I for validation.
BAC libraries that are constructed with genomic DNA fragments prepared using restriction enzymes suffer from cloning bias due to the uneven distribution of the restriction sites [7, 24, 49]. The genomic regions that contain few or none restriction sites for the enzymes that are used in BAC library construction are underrepresented or missed in the BAC libraries. To reduce cloning bias, complementary BAC libraries with genomic DNA fragments prepared using different restriction enzymes or mechanical shearing are usually required. Osoegawa et al.  established a system to construct BAC libraries with randomly sheared large genomic DNA fragments. These researchers developed a BAC vector (pTARBAC6) that contains two Bst XI recognition sites (CCATTGTGTTGG) in an inverted orientation at the positions flanking a stuffer fragment. After digestion by Bst XI, the vector produces two 3' protruding TGTG ends that are not complementary to each other. During BAC library construction, adaptors containing 3' protruding CACA ends that are not complementary to each other but are complementary to the vector ends are added to the randomly sheared and polished large genomic DNA fragments. With this system, several Drosophila BAC libraries  and a barley BAC library  were constructed. The former has been used to close physical gaps and clone telomeric regions. Both our new BAC and BIBAC vectors contain 3' protruding non-complementary ATAA ends when prepared with I-Sce I and could be used to construct BAC and BIBAC libraries with randomly sheared large genomic DNA fragments using the same approach as above except for changing the adaptor to that containing 3' protruding TTAT end.
Both of the new low-copy BAC and BIBAC vectors, pIndigoBAC536-S and BIBAC-S (1-2 copies/cell), were made into high-copy vectors by constructing composite plasmids using the high-copy vector pGEM-4Z following a previously described strategy . The two high-copy composite vectors, pHZAUBAC1 and pHZAUBIBAC1, facilitate the efficient preparation of the normally low-copy BAC and BIBAC vectors pIndigoBAC536-S and BIBAC-S, respectively, and contamination of the high-copy plasmids in the BAC/BIBAC libraries will not occur, due to the special features incorporated into the composite vectors .
Previously available BIBAC and TAC vectors [22, 47] use the Sac B gene to select recombinant clones. In our strategy, the lac Z gene is used in both of the pIndigoBAC536-S and BIBAC-S vectors in order to reconstitute the new lac Z genes with the lac Z gene of the pGEM-4Z vector in the high-copy composite vectors. In our experience, the lac Z gene is a useful marker because it produces a visible color on selection medium. The construction of large DNA fragment libraries is a high-throughput endeavor and negligence, however trivial, at any step can affect the final library quality. Using the lac Z gene selection system, leaky background colonies can be distinguished and eliminated. The ratio of blue to white colonies in pilot experiments can be used to evaluate the quality and efficiency of the vector preparation steps, e.g., restriction enzyme digestion, dephosphorylation and gel separation. Conversely, the presence of background blue colonies is sometimes an indicator of correct medium preparation. Indeed, Chang YL et al.  reported that BIBAC libraries constructed with the Sac B selection system usually contained higher numbers of empty vector clones than did the BAC libraries constructed with the lac Z selection system. The Arabidopsis BIBAC library  and the tomato BIBAC library , constructed using the original BIBAC2 vector with the Sac B selection system, contained 17.6% and 13% of empty-vector clones, respectively, whereas BAC libraries constructed using the BAC vector with the lac Z selection system usually contained less than 5% empty-vector clones. The maize and sorghum BIBAC libraries that were constructed using our new BIBAC vector BIBAC-S with the lac Z selection system had a low percentage of empty vector clones (less than 2%; data not shown).
Although most BAC and BIBAC clones were reported to be stable in E. coli and most BIBAC clones were stable in Agrobacterium[17, 21, 22, 32, 37], Song et al. [48, 50] reported that BAC clones containing tandem repeat DNA sequences were not stable in E. coli and that BIBAC and TAC clones containing potato genomic DNA fragments larger than 100 kb were not stable in Agrobacterium. Liu YG et al. [22, 31] reported that one out of 35 TAC clones containing Arabidopsis DNA fragments of < 100 kb was not stable, while 6 out of 16 TAC clones containing wheat DNA fragments of ~150 kb were not stable. We tested the stability of maize B73 BIBAC clones with insert sizes ranging from 40 kb to 160 kb in E. coli and Agrobacterium. The BIBAC clones were stable in E. coli and were considerably stable in Agrobacterium after at least 96 h (4 days) of growth. When DNA plasmids purified from Agrobacterium were directly analyzed, some samples of the BIBAC clones contained shorter or none inserts (e.g., Figure 8), a sign of instability. However, at least some of these samples may be a result of poor preparation of the low-copy large BIBAC DNA from Agrobacterium. Obtaining enough low-copy large BIBAC DNA from Agrobacterium was difficult, especially when handling large numbers of parallel samples. When the independent indirect method was used, all of the DNA samples from the BIBAC clones contained the expected inserts. Stable maintenance of BIBAC/TAC clones in Agrobacterium is a prerequisite for Agrobacterium-mediated transformation. Factors affecting the stability of BIBAC/TAC clones in Agrobacterium are not known although large insert size and highly repetitive sequences in the clones are suspected to be the most probable cause of instability [31, 48]. Our new BIBAC vector BIBAC-S contains two identical 26-bp I-Sce I-Not I sequences flanking the cloning sites. The maize genome is known to contain highly repetitive sequences . However, large fragments of maize DNA cloned into the BIBAC-S vector are stable, indicating that the large insert size and highly repetitive sequences may not necessarily affect the stability of BIBAC/TAC clones in Agrobacterium. In fact, the 160-kb B6 clone and many others were completely transferred into rice via Agrobacterium (Manuscript in preparation).
We have developed a pair of new BAC and BIBAC vectors and made the two low-copy vectors into the high-copy composite vectors. The two new vectors and their respective high-copy composite vectors can largely facilitate the construction and characterization of BAC and BIBAC libraries. The transfer of complete large genomic DNA inserts from one vector to the other is made straightforward.
Materials and methods
Construction of the new BAC vector pIndigoBAC536-S
PCR was performed to amplify the Not I fragment (containing the lac Z gene and cloning sites) of the pIndigoBAC536 plasmid using the forward primer P1, 5'-AAGGTCGAC tagggataacagggtaatCGTCAGCGGGTGTTGGCGG-3' and the reverse primer P2, 5'-CCTGTCGAC tagggataacagggtaatAGGGGTTCGCGTTGGCCGAT-3'. Both primers contain a Sal I site (underlined) and an I-Sce I site (lower case) at the 5' ends. The pIndigoBAC536 plasmid that was used as the PCR template was originally provided by Dr. M. Simon of Caltech, CA, USA, and was recovered from pCUGIBAC1 . The PCR product was cloned into the pGEM-T Easy vector (Promega), and its sequence was confirmed. The insert was recovered by Sal I digestion. Because the lac Z gene contains an internal Sal I site, the insert was digested into two Sal I fragments of 371 bp and 282 bp. The Sal I-digested backbone BAC vector fragment of 6384 bp that was recovered from the pIndigoBac536 plasmid by Sal I digestion was dephosphorylated with CIAP phosphatase and was ligated with the two lacZ Sal I fragments above. The ligation products were used to transform DH10B-competent cells. Transformants were selected on LB medium containing chloramphenicol (12.5 μg/mL), X-gal (5-bromo-4-chloro-3-indolyl-β-D-galactopyranoside, 80 μg/mL) and IPTG (Isopropyl-β-D-thiogalactopyranoside, 100 μg/mL). Blue colonies should contain one of two different ligation products, each containing a complete lac Z gene with opposite orientations relative to the vector backbone. The blue colonies were further analyzed, and the clone with the lac Z gene in an orientation relative to the vector backbone that was similar to the original pIndigoBAC536 was selected. Two Nde I sites, one located in the lac Z gene and the other in the vector backbone, were used to distinguish the two ligation products. Digestion of plasmids from the required ligation product with Nde I resulted in 4280 bp and 2757 bp fragments, whereas plasmids from the non-required ligation product yielded 3820 bp and 3217 bp fragments. The restriction sites Sal I, I-Sce I, Hin dIII, Bam HI and Eco RI in the new vector were validated by digestion.
Construction of the new BIBAC vector BIBAC-S
The same Not I fragment of the pIndigoBAC536 plasmid described above was amplified by PCR using the forward primer P3, 5'-AAGGAAAAAAGCGGCCGC tagggataacagggtaatCGTCAGCGGGTGTTGGCGG-3' and the reverse primer P4, 5'-AAGGAAAAAAGCGGCCGC AtagggataacagggtaatAGGGGTTCGCGTTGGCCGAT -3'. Both primers contain a Not I site (underlined) and an I-Sce I site (lower case) at the 5' ends. The PCR product was cloned into the pGEM-T Easy vector (Promega) and its sequence was confirmed. The insert was recovered by Not I digestion and was ligated to the dephosphorylated Not I-digested backbone BIBAC vector fragment that was prepared from BIBAC2 (; obtained from the Cornell Center for Technology Enterprise & Commercialization). The ligation products were transformed into DH10B-competent cells. Transformants were selected on LB medium containing kanamycin (20 μg/mL), X-gal (80 μg/mL) and IPTG (100 μg/mL). The blue colonies, which should contain the lac Z gene (PCR product), were further analyzed. The clone that contained the lac Z gene in an orientation to the vector backbone as shown in Figure 1 was selected. The restriction sites I-Sce I, Not I and Bam HI of the new vector were validated by digestion.
Construction of the high-copy composite BAC vector pHZAUBAC1 and BIBAC vector pHZAUBIBAC1
The high-copy composite vectors were constructed following a previously described approach . The high-copy composite BAC vector pHZAUBAC1 was constructed by ligating the low-copy BAC vector pIndigoBAC536-S to the high-copy pGEM-4Z at the Hin dIII site, and was selected on LB medium containing chloramphenicol (12.5 μg/mL), ampicillin (50 μg/mL), X-gal (80 μg/mL) and IPTG (100 μg/mL). The high-copy composite BIBAC vector pHZAUBIBAC1 was constructed by ligating the low-copy BIBAC-S to the high-copy pGEM-4Z at the Bam HI site, and was selected on LB medium containing kanamycin (20 μg/mL), ampicillin (50 μg/mL), X-gal (80 μg/mL) and IPTG (100 μg/mL). All resulting colonies were to be blue.
Re-cloning of intact BAC inserts into the BIBAC-S vector
Plasmid DNA from maize Mo17 BAC clones that were constructed using the new BAC vector pIndigoBAC536-S was extracted using the Qiagen plasmid preparation kit (Qiagen) and was digested with I-Sce I for 5 hours at 37°C. The samples were heated at 70°C for 10 min to inactivate the enzyme and were extracted once with chloroform. The BAC digestion products were precipitated with ethanol and resuspended in ddH2O. The I-Sce I-digested backbone BIBAC-S vector (23.2 kb) was prepared by digesting the high-copy composite BIBAC vector pHZAUBIBAC1 with I-Sce I followed by separation of the digestion products on a 1% agarose gel and electroelution of the 23.2 kb DNA band from the gel. The I-Sce I-digested backbone BIBAC-S vector was ligated to the I-Sce I BAC digestion products at 16°C overnight. The ligation products were used to transform DH10B-competent cells. The transformants were selected on LB containing kanamycin (20 μg/mL), X-gal (80 μg/mL) and IPTG (100 μg/mL). DNA plasmids prepared from the resulting white colonies were digested with I-Sce I and were analyzed using pulse-field gel electrophoresis.
Re-cloning of NotI fragments of BAC inserts into the BIBAC-S vector
The Not I BAC digestion products were prepared following the same procedures as described above for the I-Sce I BAC digestion products. Rice MH63 BAC clones constructed using the BAC vector pIndigoBAC536 prepared from pCUGIBAC1  were chosen for this experiment. The Not I-digested backbone BIBAC-S vector (23.2 kb) was prepared by digesting the high-copy composite BIBAC vector pHZAUBIBAC1 with Not I, dephosphorylating the digestion products with CIAP, separating the digestion products on a 1% agarose gel and electroeluting the 23.2 kb DNA band from the gel. The dephosphorylated Not I-digested backbone BIBAC-S vector was ligated to the Not I BAC digestion products at 16°C overnight. Subsequent procedures were carried out as described above. DNA plasmids from the resulting white colonies were digested with Not I and were analyzed using pulse-field gel electrophoresis.
Stability tests of BIBAC clones in E. coli and Agrobacterium
To test the stability of BIBAC clones in E. coli, the clones were cultured in LB medium containing 20 μg/mL kanamycin at 37°C with shaking at 250 rpm and were sub-cultured every 24 hours. Plasmid DNA was extracted and was analyzed using pulse-field gel electrophoresis. To test the stability of BIBAC clones in Agrobacterium, BIBAC DNA was transferred into the Agrobacterium strain EHA105 by electroporation. EHA105 colonies were chosen at random, were cultured in LB medium containing 20 μg/mL kanamycin at 28°C with shaking at 250 rpm and were sub-cultured every 48 hours. In the direct-test experiment, DNA plasmids were extracted from EHA105 cultures and were analyzed using pulse-field gel electrophoresis. In the indirect-test experiment, DNA plasmids were extracted from EHA105 cultures and were transferred back into E. coli DH10B cells. Following propagation in E. coli, plasmid DNA was re-extracted from the E. coli cultures and was analyzed using pulsed-field gel electrophoresis.
Pulsed-field gel electrophoresis
BAC or BIBAC DNA plasmids were prepared from E. coli or Agrobacterium cultures, were digested with I-Sce I or Not I as indicated and were separated on 1% agarose CHEF (CHEF-DRIII apparatus, Bio-Rad) gels at 6 V/cm and 14°C in 0.5 × TBE buffer with a linear ramp time from 5 to 15 s for 16 h.
This work was supported by a grant from the National Natural Science Foundation of China (grant No. 30971748). We are grateful to Dr. Hamilton and the Cornell Center for Technology Enterprise & Commercialization for providing the BIBAC2 vector.
- 1.Shizuya H, Birren B, Kim UJ, Mancino V, Slepak T, Tachiiri Y, Simon M: Cloning and stable maintenance of 300-kilobase-pair fragments of human DNA in Escherichia coli using an F-factor-based vector. Proc Natl Acad Sci USA. 1992, 89: 8794-8797. 10.1073/pnas.89.18.8794.PubMedCentralCrossRefPubMedGoogle Scholar
- 4.Yim YS, Davis GL, Duru NA, Musket TA, Linton EW, Messing JW, McMullen MD, Soderlund CA, Polacco ML, Gardiner JM, Coe EH: Characterization of three maize bacterial artificial chromosome libraries toward anchoring of the physical map to the genetic map using high-density bacterial artificial chromosome filter hybridization. Plant Physiol. 2002, 130: 1686-1696. 10.1104/pp.013474.PubMedCentralCrossRefPubMedGoogle Scholar
- 7.Schulte D, Ariyadasa R, Shi B, Fleury D, Saski C, Atkins M, Dejong P, Wu CC, Graner A, Langridge P, Stein N: BAC library resources for map-based cloning and physical map construction in barley (Hordeum vulgare L.). Bmc Genomics. 2011, 12: 247. 10.1186/1471-2164-12-247.PubMedCentralCrossRefPubMedGoogle Scholar
- 8.Analysis of the genome sequence of the flowering plant Arabidopsis thaliana. Nature. 2000, 408: 796-815. 10.1038/35048692.Google Scholar
- 10.The map-based sequence of the rice genome. Nature. 2005, 436: 793-800. 10.1038/nature03895.Google Scholar
- 17.Ammiraju JS, Luo M, Goicoechea JL, Wang W, Kudrna D, Mueller C, Talag J, Kim H, Sisneros NB, Blackmon B: The Oryza bacterial artificial chromosome library resource: construction and analysis of 12 deep-coverage large-insert BAC libraries that represent the 10 genome types of the genus Oryza. Genome Res. 2006, 16: 140-147.PubMedCentralCrossRefPubMedGoogle Scholar
- 18.Lin Haiyan, Xia Peng, Wing Rod. A, Zhang Qifa, Luo Meizhong: Dynamic Intra-Japonica Subspecies Variation and Resource Application. Molecular Plant 2011. 2011, 10.1093/mp/ssr085.Google Scholar
- 22.Liu YG, Shirano Y, Fukaki H, Yanai Y, Tasaka M, Tabata S, Shibata D: Complementation of plant mutants with large genomic DNA fragments by a transformation-competent artificial chromosome vector accelerates positional cloning. Proc Natl Acad Sci USA. 1999, 96: 6535-6540. 10.1073/pnas.96.11.6535.PubMedCentralCrossRefPubMedGoogle Scholar
- 31.Liu YG, Nagaki K, Fujita M, Kawaura K, Uozumi M, Ogihara Y: Development of an efficient maintenance and screening system for large-insert genomic DNA libraries of hexaploid wheat in a transformation-competent artificial chromosome (TAC) vector. Plant J. 2000, 23: 687-695. 10.1046/j.1365-313x.2000.00827.x.CrossRefPubMedGoogle Scholar
- 32.Ortiz-Vazquez E, Kaemmer D, Zhang HB, Muth J, Rodriguez-Mendiola M, Arias-Castro C, James A: Construction and characterization of a plant transformation-competent BIBAC library of the black Sigatoka-resistant banana Musa acuminata cv. Tuu Gia (AA). Theor Appl Genet. 2005, 110: 706-713. 10.1007/s00122-004-1896-1.CrossRefPubMedGoogle Scholar
- 33.Xu YH, Zhu YY, Zhou HC, Li Q, Sun ZX, Liu YG, Lin HX, He ZH: Identification of a 98-kb DNA segment containing the rice Eui gene controlling uppermost internode elongation, and construction of a TAC transgene sublibrary. Molecular Genetics and Genomics. 2004, 272: 149-155.CrossRefPubMedGoogle Scholar
- 37.Luo M, Wang YH, Frisch D, Joobeur T, Wing RA, Dean RA: Melon bacterial artificial chromosome (BAC) library construction using improved methods and identification of clones linked to the locus conferring resistance to melon Fusarium wilt (Fom-2). Genome. 2001, 44: 154-162.CrossRefPubMedGoogle Scholar
- 42.Luo M, Kim H, Kudrna D, Sisneros NB, Lee SJ, Mueller C, Collura K, Zuccolo A, Buckingham EB, Grim SM: Construction of a nurse shark (Ginglymostoma cirratum) bacterial artificial chromosome (BAC) library and a preliminary genome survey. Bmc Genomics. 2006, 7: 106. 10.1186/1471-2164-7-106.PubMedCentralCrossRefPubMedGoogle Scholar
- 44.Song X, Goicoechea JL, Ammiraju JS, Luo M, He R, Lin J, Lee SJ, Sisneros N, Watts T, Kudrna DA: The 19 genomes of Drosophila: a BAC library resource for genus-wide and genome-scale comparative evolutionary research. Genetics. 2011, 187: 1023-1030. 10.1534/genetics.111.126540.PubMedCentralCrossRefPubMedGoogle Scholar
- 46.Hurwitz BL, Kudrna D, Yu Y, Sebastian A, Zuccolo A, Jackson SA, Ware D, Wing RA, Stein L: Rice structural variation: a comparative analysis of structural variation between rice and three of its closest relatives in the genus Oryza. Plant J. 2010, 63: 990-1003. 10.1111/j.1365-313X.2010.04293.x.CrossRefPubMedGoogle Scholar
This article is published under license to BioMed Central Ltd. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.