Construction and characterization of an infectious clone of coxsackievirus A16
- 5.4k Downloads
Coxsackievirus A16 (CVA16) is a member of the Enterovirus genus of the Picornaviridae family and it is a major etiological agent of hand, foot, and mouth disease (HFMD), which is a common illness affecting children. CVA16 possesses a single-stranded positive-sense RNA genome containing approximately 7410 bases. Current understanding of the replication, structure and virulence determinants of CVA16 is very limited, partly due to difficulties in directly manipulating its RNA genome.
Two overlapping cDNA fragments were amplified by RT-PCR from the genome of the shzh05-1 strain of CVA16, encompassing the nucleotide regions 1-4392 and 4381-7410, respectively. These two fragments were then joined via a native Xba I site to yield a full-length cDNA. A T7 promoter and poly(A) tail were added to the 5' and 3' ends, respectively, forming a full CVA16 cDNA clone. Transfection of RD cells in vitro with RNA transcribed directly from the cDNA clone allowed the recovery of infectious virus in culture. The CVA16 virus recovered from these cultures was functionally and genetically identical to its parent strain.
We report the first construction and characterization of an infectious cDNA clone of CVA16. The availability of this infectious clone will greatly enhance future virological investigations and vaccine development for CVA16.
KeywordsCoxsackievirus A16 Infectious cDNA clone In vitro transcription Recovered virus
Hand, Foot, and Mouth Disease
Dulbecco's Modified Eagle's medium
Coxsackievirus A16 (CVA16) and enterovirus 71 (EV71) are major etiological agents of hand, foot, and mouth disease (HFMD), which is a common illness in children [1, 2, 3, 4, 5, 6]. Surveillance data indicate that CVA16 and EV71 often co-circulate during HFMD outbreaks [1, 2, 3, 5, 6, 7, 8]. The illness caused by CVA16 infection is usually mild , whereas EV71 infection is often associated with severe complications such as brainstem encephalitis, severe pulmonary edema and shock, and significant mortality [6, 10, 11]. Therefore, EV71 has been the main focus of virological investigations and vaccine development for HFMD. However, recent reports suggest that humans can be co-infected by CVA16 and EV71, and carry these two viruses simultaneously [12, 13]. This co-infection may have contributed to the recently observed recombination between CVA16 and EV71 [14, 15], which is believed to have led to the emergence of a recombinant EV71 responsible for the large HFMD outbreak in Fuyang City, China, during 2008 . Furthermore, CVA16 infection is not always benign because fatal cases associated with CVA16 infection have been reported [16, 17, 18]. These findings indicate the significant importance of further investigation of CVA16 in order to understand better and ultimately control infections with this virus.
Both CVA16 and EV71 are members of the Enterovirus genus of the Picornaviridae family and they possess a single-stranded positive-sense RNA genome containing approximately 7400 bases. The CVA16 genome can be divided into 5'-non-coding, protein coding, and 3'-non-coding regions . The 5'-non-coding region is ~740 nucleotides in length and it contains genetic elements required for genome replication and translation, for example, an internal ribosome entry site (IRES). The 3'-non-coding region is ~100 nucleotides in length and it is followed by a 3' poly(A) tail. The protein coding region consists solely of a single open reading frame that encodes a large polyprotein containing structural (P1) and non-structural (P2 and P3) regions . Recent efforts have been directed toward the understanding of the expression, processing, and function of CVA16-encoded proteins. For example, the use of a panel of polyclonal antibodies against the recombinant capsid subunit proteins of CVA16 demonstrated that P1 can be processed by CVA16-encoded proteases to yield the subunit proteins VP0, VP1 and VP3, all of which subsequently co-assemble to form viral capsids . However, further dissection and characterization of the role of individual viral proteins and genetic elements has been hindered by the difficulty of directly manipulating the RNA genome of CVA16.
For many RNA viruses, cDNA clones of the entire viral genome can serve as a template for the generation of infectious RNA. These infectious cDNA clones provide a platform for the manipulation of viral genomes and they provide a valuable tool for studying the molecular biology of virus replication, virus structure, virulence determinants, and vaccine development. Infectious cDNA clones have been successfully developed for a number of enteroviruses, including poliovirus , coxsackievirus B6 , coxsackievirus B2 , echovirus 5 , and enterovirus 71 [25, 26, 27], but not for CVA16. In this paper, we report the first construction of an infectious cDNA clone of CVA16. This infectious clone contains the full-length cDNA of CVA16 flanked by a T7 promoter and a poly(A) tail at the 5' and 3' ends, respectively. Transfection of RD cells with RNA transcribed directly from the cDNA clone resulted in the successful recovery of infectious virus. The recovered CVA16 was found to be functionally and genetically identical to its parent strain, and it could be used to facilitate future virological investigation as well as vaccine development for CVA16.
Construction of a full-length infectious clone of CVA16
Primers used in this study
Sequence (5' - 3')
T7 promoter introduction/priming
cDNA synthesis from negative-strand RNA
RT-PCR for negative-strand RNA
RT-PCR for negative-strand RNA
Recovery of infectious CVA16 from the cDNA clone
Characterization of the recovered CVA16
The biological characteristics of the wild-type and recovered viruses were also compared. The R1 virus was found to generate the same negative-strand viral RNA as the wild-type virus, as demonstrated by the amplification of a ~0.9 Kb RT-PCR product from the R1 virus (data not shown) and the wild-type virus-infected cells (Figure 4). R1 virus-infected cells were then found to display typical CPE (including cell rounding, aggregation, and floatation) (Figure 5). The R1 virus-induced CPE was indistinguishable from that of the wild-type virus (Figure 5). Moreover, the R1 virus plaque phenotype was similar to that of the wild-type strain (Figure 8).
The aim of this study was to construct an infectious clone of CVA16. The genome of CVA16 is an RNA molecule measuring 7410 bases in length. In our study, viral RNA was reverse transcribed to yield first-strand cDNA, which was then used subsequently as a template for the PCR amplification of CVA16-specific fragments. Two strategies were adopted to obtain a full-length cDNA clone of CVA16. The first was to directly amplify the full-length CV(1-7410) from the reversely transcribed cDNA, while the other was to amplify two fragments, i.e., CV(1-4392) and CV(4381-7410), and subsequently rejoin them via an Xba I site, to yield CV(1-7410). The first strategy is successful for the construction of infectious clones of a number of enteroviruses [23, 24, 29], including the closely related EV71 , but it failed for CVA16 in this study (data not shown). However, when we used the latter strategy, we found that CV(1-4392) and CV(4381-7410) could be amplified and subsequently fused to produce CV(1-7410). This suggests that the size of any target fragment is an important factor in the successful amplification of long PCR regions. Interestingly, CV(1-7410) and its slightly longer form, T7-CV(1-7410-pA), were amplified from the cloned plasmid (Figure 1), although it could not be generated from the reverse transcribed first-strand cDNA (data not shown). Given that the reverse transcription reaction mixture was not homogeneous, the purity and/or abundance of the full-length first-strand cDNA could be critical to the successful amplification of full-length double-stranded cDNAs.
This study reports the first construction and characterization of a novel infectious cDNA clone of CVA16. This cDNA clone was capable of producing the infectious CVA16 virus, which was genetically and biologically identical to its parent stain. The availability of a CVA16 infectious clone will greatly facilitate the investigation of the genetic determinants of its virulence. This clone will also allow the rapid, rational development and testing of candidate live attenuated vaccines and antiviral therapeutics against CVA16.
Cells and viruses
RD and Vero cells were grown in DMEM (Gibco, Grand Island, NY, USA) supplemented with 10% FBS, 100 U/ml penicillin, and 100 μg/ml streptomycin at 37°C with 5% CO2. The CVA16 strain shzh05-1, described in , was propagated in RD or Vero cells. Virus titers were determined by microtitration using RD cells and expressed as the 50% tissue culture infectious dose (TCID50), according to the Reed-Muench method .
RNA extraction and reverse transcription
RNA was extracted from CVA16/shzh05-1 infected RD cells using Trizol reagent (Invitrogen, Carlsbad, CA, USA). The extracted RNA was reverse transcribed using oligo(dT) primers and M-MLV reverse transcriptase to produce cDNA (Invitrogen, Carlsbad, CA, USA), according to the manufacturer's instructions. The resultant first strand cDNA was used as a template for subsequent PCR amplification of CVA16 genome fragments.
Primers were designed based on the published sequence of CVA16 strain shzh05-1 (GenBank# EU262658) (Table 1) to amplify specific fragments of the CVA16 genome. Primers P1 and P2 were designed to amplify a cDNA fragment encompassing nucleotides 1-4392, which was designated CV(1-4392), and it also contained engineered Hind III and Xba I restriction enzyme sites. Primers P3 and P4 were designed to amplify a cDNA fragment encompassing nucleotides 4381-7410, which was designated CV(4381-7410), and it contained engineered Xba I and Not I restriction enzyme sites. Primers P5 and P6 were designed to amplify a cDNA fragment encompassing nucleotides 6087-7410 with an added poly(A) tail, which was designated CV(6087-7410-pA). Primer P7 contained a Hind III site, a T7 promoter sequence, and 20 nucleotides of the 5' UTR of CVA16 cDNA. It was used to introduce the T7 promoter upstream of the full-length cDNA for efficient in vitro transcription and to prime the synthesis of first strand cDNA from negative-strand viral RNA. Primer P8 anchored to the nucleotides 2447-2470 of positive-sense CVA16 full-length cDNA while P9 was complementary to the nucleotides 3304-3328 of positive-sense cDNA. Both P8 and P9 were used to detect negative-strand RNA by RT-PCR amplification of a ~0.9 KB fragment (nucleotides 2447-3328).
Cloning of the full-length cDNA
CV(1-4392) was amplified from the reverse transcribed first strand cDNA using primers P1 and P2 (Table 1). Similarly, CV(4381-7410) and CV(6087-7410-pA) were obtained using the primer pairs P3/P4 and P5/P6 (Table 1), respectively. CV(1-4392) and CV(4381-7410) were digested with Hind III/Xba I and Xba I/Not I, respectively, and ligated into Hind III/Not I digested pcDNA3.1 to produce pcDNA3.1-CV(1-7410). CV(6087-7410-pA) was digested with Xho I/Not I and then used to replace the corresponding sequence within pcDNA3.1-CV(1-7410), resulting in pcDNA3.1-CV(1-7410-pA). The primer pair P6/P7 (Table 1) was used for PCR amplification with pcDNA3.1-CV(1-7410-pA) as a template to introduce the T7 promoter for in vitro transcription. The resultant PCR product containing an engineered T7 promoter sequence upstream of the CV(1-7410-pA) was cloned into the pMD19-T Simple vector (Takara Mirus Bio, Madison, WI, USA), yielding pMD19-CV.
In vitro transcription
PMD19-CV was digested with Not I, purified and used as the template for in vitro transcription. In vitro transcription was performed using the Riboprobe system-T7 in vitro transcription kit (Promega, Madison, WI, USA), according to the manufacturer's instructions.
RD cells were grown in T75 flasks to 90% confluency, harvested by centrifugation, then resuspended in OPTI-MEM medium (Cat# 31985, Invitrogen, Carlsbad, CA, USA). Next, 400 μL (4 × 106 cells) of the cell suspension was mixed with 10 μg of in vitro synthesized RNA transcripts. These mixtures were incubated for 3 min at room temperature, transferred into an electroporation cuvette, and then subjected to electroporation at 220 V using the GenePulser Xcell™ electroporation system (Bio-Rad, Hercules, CA, USA). Immediately after electroporation, the mixtures were resuspended in 5 ml of DMEM supplemented with 10% FBS, transferred to a T25 flask, and incubated at 37°C with 5% CO2 for 72 h.
RT-PCR for the detection of negative-strand RNA
Viral RNA was reverse transcribed using primer P7 to detect negative-strand RNA (Table 1). The resultant first strand cDNA was used as a template for PCR amplification of a fragment (nucleotides 2447-3328) with primers P8 and P9 (Table 1). PCR was performed using PrimeSTAR™ HS DNA polymerase (Takara Mirus Bio, Madison, WI, USA) with the following cycle: 94°C for 5 min, followed by 30 cycles at 94°C for 30 s, 55°C for 30 s, 72°C for 60 s, with a final extension of 72°C for 10 min in an MJ Mini™ thermal cycler (Bio-Rad, Hercules, CA, USA).
SDS-PAGE and western blot analyses
SDS-PAGE and western blotting were performed as previously described . Briefly, proteins were separated on 12% polyacrylamide gels and transferred onto PVDF membranes. Membranes were then probed using one of three home-made CVA16 capsid protein-specific antisera , followed by a corresponding horseradish peroxidase (HRP)-conjugated secondary antibody (Sigma, St. Louis, MO, USA). Membranes were developed by chemiluminescence using a BeyoECL Plus kit (Cat# P0018; Beyotime, Shanghai, China) and signals were recorded with a LAS-4000 Luminescent Image Analyzer (Fujifilm Life Science USA, Stamford, CT, USA).
Immunofluorescent staining was performed as previously described , using three polyclonal antibodies against the recombinant CVA16 capsid subunit proteins, VP0, VP1, and VP3. Stained samples were examined on an upright fluorescence microscope (Leica, Wetzlar, Germany).
The plaque assay was performed using 24-well plates containing Vero cell monolayers. Ten-fold dilutions of virus suspension were inoculated at 400 μl/well and incubated for 2 h at 37°C. The virus suspension was then removed and 1 ml of DMEM containing 2% FBS and 1% low melting point (LMP) agarose (Promega, Madison, WI, USA) was added to each well, before incubating at 37°C. The medium was discarded after several days and cells were fixed in 10% formaldehyde solution then stained with 0.1% crystal violet (Sigma, St. Louis, MO, USA).
We thank Drs Bing Sun and Qi Jin for providing the CVA16 virus. We also thank Dr. Andy Tsun and the International Science Editing for their excellent editorial contribution. This work was supported by a grant (#KSCX2-YW-BR-2) from the Chinese Academy of Sciences "100 Talents" program and a grant (#2010KF-07) from the Biochemical Engineering National Key Laboratory of China. Z.H. gratefully acknowledges the support of SA-SIBS scholarship program.
- 3.Li L, He Y, Yang H, Zhu J, Xu X, Dong J, Zhu Y, Jin Q: Genetic characteristics of human enterovirus 71 and coxsackievirus A16 circulating from 1999 to 2004 in Shenzhen, People's Republic of China. J Clin Microbiol 2005, 43: 3835-3839. 10.1128/JCM.43.8.3835-3839.2005PubMedCentralCrossRefPubMedGoogle Scholar
- 4.Hosoya M, Kawasaki Y, Sato M, Honzumi K, Hayashi A, Hiroshima T, Ishiko H, Kato K, Suzuki H: Genetic diversity of coxsackievirus A16 associated with hand, foot, and mouth disease epidemics in Japan from 1983 to 2003. J Clin Microbiol 2007, 45: 112-120. 10.1128/JCM.00718-06PubMedCentralCrossRefPubMedGoogle Scholar
- 9.Chang LY, Lin TY, Huang YC, Tsao KC, Shih SR, Kuo ML, Ning HC, Chung PW, Kang CM: Comparison of enterovirus 71 and coxsackie-virus A16 clinical illnesses during the Taiwan enterovirus epidemic, 1998. Pediatr Infect Dis J 1999, 18: 1092-1096. 10.1097/00006454-199912000-00013CrossRefPubMedGoogle Scholar
- 14.Yip CC, Lau SK, Zhou B, Zhang MX, Tsoi HW, Chan KH, Chen XC, Woo PC, Yuen KY: Emergence of enterovirus 71 "double-recombinant" strains belonging to a novel genotype D originating from southern China: first evidence for combination of intratypic and intertypic recombination events in EV71. Arch Virol 2010, 155: 1413-1424. 10.1007/s00705-010-0722-0CrossRefPubMedGoogle Scholar
- 15.Zhang Y, Zhu Z, Yang W, Ren J, Tan X, Wang Y, Mao N, Xu S, Zhu S, Cui A, et al.: An emerging recombinant human enterovirus 71 responsible for the 2008 outbreak of hand foot and mouth disease in Fuyang city of China. Virol J 2010, 7: 94. 10.1186/1743-422X-7-94PubMedCentralCrossRefPubMedGoogle Scholar
- 25.Arita M, Ami Y, Wakita T, Shimizu H: Cooperative effect of the attenuation determinants derived from poliovirus sabin 1 strain is essential for attenuation of enterovirus 71 in the NOD/SCID mouse infection model. J Virol 2008, 82: 1787-1797. 10.1128/JVI.01798-07PubMedCentralCrossRefPubMedGoogle Scholar
- 32.Reed LJ, M H: A simple method of estimating 50 percent endpoints. Am J Hyg 1938, 27: 493-499.Google Scholar
This article is published under license to BioMed Central Ltd. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.