Encapsulated Escherichia coli in alginate beads capable of secreting a heterologous pectin lyase
- 10k Downloads
Production of heterologous proteins in the E. coli periplasm, or into the extracellular fluid has many advantages; therefore naturally occurring signal peptides are selected for proteins translocation. The aim of this study was the production in high yields of a recombinant pectin lyase that is efficiently secreted and the encapsulation of transformed E. coli cells for pectin degradation in a biotechnological process.
The nucleotide sequence of Bacillus subtilis α-amylase's signal peptide was fused to the N-terminal of an heterologously expressed pectin lyase in E. coli BL21 [DE3]. Thus pectin lyase secretion was achieved into the extracellular growth medium. E. coli cells harboring the recombinant plasmid heterologously express pectin lyase to around 22% of the total cellular proteins, as it was estimated by SDS-PAGE and image analysis. IPTG induces the heterologously expressed enzyme, which is initially distributed extracellularly (7 hour) and later on at the periplasmic (9 hours) or cytosolic fraction (20 hours). No pectin lyase activity was found in the membranes fraction and in the inclusion bodies. Encapsulation of the recombinant strains of E. coli in alginate or alginate/silica beads 1:5 showed that pectin lyase could degrade effectively its substrate, for at least ten operational cycles.
Secretion of an heterologously overexpressed pectin lyase in E. coli BL21 [DE3] was achieved in this study. For this purpose the signal peptide of α-amylase from B. subtilis was fused to the N-terminal domain of pectin lyase. Encapsulated E. coli BL21 [DE3] cells harboring pET29c/exPNL were used successfully for pectin degradation up to ten operational cycles indicating that under special conditions this might have biotechnological implementations.
KeywordsAlginate Signal Peptide Pectin Inclusion Body Alginate Bead
extracellular pectin lyase
Pectin lyase (PNL, EC 126.96.36.199) belongs to polysaccharide lyase family 1 and cleaves α-1,4 bonds between galacturonic acid residues of pectin. The mode of PNL action is trans-elimination  with end-product oligosaccharides of 4-deoxy-6-methyl-alpha-D-galact-4-enuronosyl groups. Pectins are present in the primary cell wall and intracellular space of higher plants. The enzymic degradation of pectin is of great interest in food industry for fruit juice clarification, reduction of turbidity and increase of the amount of juice extracted from fruit pulp [2, 3]. The enzymic degradation is also used in the textile industry in the processing of natural fibers . Among the pectinolytic enzymes, pectin lyase is the only one known to degrade highly esterified pectin without the previous action of other enzymes .
Heterologous expression of pectin lyase gene (pnl) from Pseudomonas marginalis N6301 in E. coli BL21 [DE3] has previously been reported . The enzyme was overproduced in the cytoplasm, bearing a 6-His-tag at the C-terminal, and it was purified close to homogeneity by affinity chromatography on a Ni++-NTA agarose column. Even though the heterologous expression of PNL was achieved in high yields there was a number of limitations compared to PNL production from its native source, the bacterium P. marginalis. It was necessary to disrupt bacterial cells to recover the enzyme with the proper protein folding.
Since secretion of recombinant proteins is preferred, many signal sequences derived from naturally occurring secretory proteins could be selected to support the efficient translocation of this heterologous polypeptide across the inner membrane, when fused to its amino termini . Signal peptides usually consist of a positively charged amino-terminus (n-region, 1–5 residues in length), a central hydrophobic domain (h-region, 7–15 residues) and a neutral but polar carboxy-terminus domain (c-region, 3–7 residues). The c-region specifies the signal peptide cleavage site for specific signal peptidases whereas the other two domains are required for efficient translocation . The length of signal peptides ranges from 22–32 amino acids. The majority of E. coli secreted proteins is either localized in the periplasm, or is associated with the inner or outer membranes . Although recombinant proteins targeted to the periplasm remain to this cellular compartment, their release into the extracellular fluid may occur through non-specific leakage, or due to cell lysis [10, 11].
The signal peptide of α-amylase from the gram-positive bacterium Bacillus subtilis cloned and excreted in E. coli, a Gram- bacterium, maps among the signal peptides of E. coli excreted proteins . This Bacillus signal peptide can also achieve secretion in E. coli of the periplasmic space protein β-lactamase to the extracellular surroundings .
In this report, we studied the fusion of the 33-aminoacid-signal sequence of B. subtilis α-amylase to the amino-terminal domain of pectin lyase and the secretion of the heterologous expressed pectin lyase. The transformed bacteria were further encapsulated in alginate beads and were tested successfully for pectin degradation.
Construction of a himeric PNL carrying the signal peptide of B. subtilis α-amylase
Overexpression of exPNL
Subcellular distribution of exPNL activity
Cell encapsulation in alginate beads
There is a large number of reports on the secretory expression of recombinant proteins from E. coli [9, 18]. Secreted polypeptides are synthesized as preproteins containing an amino-terminal signal sequence that is cleaved during the translocation process. This signal sequence is recognized and then cleaved by inner-membrane-associated signal peptidases. The secretion efficiency of these proteins is strongly dependent on the signal sequence used, the overall structure of the precursor protein and the processing of the signal peptide. Periplasmic production of recombinant proteins has several advantages with respect to cytoplasmic production, but frequently overproduced foreign proteins are not efficiently secreted to the periplasm in E. coli.
According to Sjöström et al.  the signal peptide of B. subtilis α-amylase maps among the signal peptides of E. coli excreted proteins and when it was added to β-lactamase the protein was secreted to the periplasm . It is also stated that the secretion mechanism of B. subtilis is similar to that of E. coli with minor differences with respect to substrate specificities of their signal peptidases, or in other proteins related to secretion. In particular, the signal peptide of α-amylase has a sequence of Ala-Ala-Ser-Ala recognized by type I signal peptidases, which are common in B. subtilis and E. coli . These data lead us to the construction of plasmid pET29c/expnl from pET29c/pnl carrying the B. subtilis α-amylase's signal sequence, introduced by NdeI and BamHI restriction sites (Fig. 1).
The recombinant PNL was secreted in the extracellular medium at around 30% of the total activity at the early stage of induction and later on the activity accumulated in the cytoplasm. Those results suggested that either the bacterial secretory mechanism was not working effectively, or that the degradation of the protein was very fast.
Although the transformed bacteria were cultivated at low temperature, the overproduced exPNL was partially segregated as inclusion bodies. Recent reports presented that co-overproduction of SecB, DnaK-DnaJ and GroEL-GroES has met variable success and improved secretion for a number of heterologous proteins in E. coli [20, 21, 22, 23]. Since the signal sequence influences secondary and tertiary structure formation of the secretory proteins, which in turn affect chaperone recognition, we would like to try several signal sequences and/or overproduce different chaperones to optimize the translocation of the overproduced exPNL in the near future. Even though exPNL was not secreted in high levels and the rate of hydrolysis was low, in our experiments we showed that transformed E. coli with pET29/expnl encapsulated in alginate beads or alginate/silica gel 1:5 can be used for pectin degradation effectively, for at least ten operational cycles.
So far the commercial pectolytic preparations that are used in food processing industries, are crude multi-enzyme preparations from Aspergillus niger and contain hemicellulase, cellulase, xylanase, pectin esterase, polygalacturonase and pectin lyase . Although pectolytic enzymes are widely used for industrial purposes, little research has been carried out on pectolytic enzymes immobilized in solid matrices and even less on cell encapsulation. Previously pectin lyase has been immobilized on DEAE-cellulose, on porous glass  and recently on nylon, with no loss of enzymic activity after 12 cycles of operation . Our results of using encapsulated bacterial cells capable of secreting pectin lyase appear to be of potential interest for an industrial application.
The aim of this study was the secretion of an heterologously overexpressed pectin lyase in E. coli BL21 [DE3]. For this purpose, the signal peptide of α-amylase from B. subtilis was fused to the N-terminal domain of pectin lyase that had been previously  cloned and overexpressed in E. coli BL21 [DE3]. Secretion into the extracellular medium was observed right after IPTG induction but then the fusion protein was accumulated in the periplasm and cytoplasm. Encapsulated E. coli BL21 cells harboring pET29c/exPNL in alginate beads, capable of secreting pectin lyase were used successfully for pectin degradation up to ten operational cycles, providing expenditure for future biotechnological applications.
Materials and methods
All chemical compounds were purchased from SIGMA, Fluka, Baker and BDH Chemicals. Restriction enzymes, Taq polymerase and other reagents needed for molecular biology experiments were purchased from New England Biolabs.
Isolation of DNA
Construction of pET29c/expnl containing α-amylase's signal sequence
We have recently reported that pnl gene of P. marginalis was amplified by PCR and cloned into plasmid pET29c using BamHI and HindIII restriction sites . In this paper plasmid pET29c/expnl is constructed from pET29c/pnl and B. subtilis α-amylase's signal sequence  to secrete pectin lyase. Larger fragments containing α-amylase's signal sequence were amplified by PCR using B. subtilis genomic DNA as the template and proper oligonucleotides. The reaction was performed as follows: 50 μl reaction volume was prepared to contain 2 units of Taq polymerase, 5 μl of polymerase buffer, 200 μM of each dNTP, 0.13 μg/μl of each primer and 1 ng of template DNA. The reaction mixture was cycled 30 times using the following conditions: 92°C for 1 min, 54°C for 30 sec, 72°C for 50 sec and another 5 min at 72°C at the end of the cycles. The amplification products were electrophoresed in 1.5% w/v agarose gel and products of right size were used as the template DNA in a second PCR, where primers specific for α-amylase's signal sequence and with NdeI and BamHI restriction sites were used (forward: 5'-GGAATTCCATATGTTTGCAAAACGA-3', reverse: 5'-CGCGGATCCTACTCGCAGCC-3'). The reaction mixture and the conditions for PCR were the same as described above. The PCR product was electrophoresed in 1.5% w/v agarose gel and then was cut and extracted from the gel using the Qiagen gel extraction kit. The 99 bp NdeI-BamHI PCR fragment was introduced into the NdeI-BamHI fragment of pET29c/pnl resulting in pET29c/expnl plasmid. E. coli BL21 [DE3] competent cells were prepared according to Sambrook et al.  and transformed with pET29c/expnl.
Microorganisms and growth conditions
The recombinant strains of E. coli BL21 [DE3] with the constructed plasmid pET29c/expnl were grown at 37°C, in LB medium containing kanamycin (50 μg/ml) with vigorous agitation. When cells reached an optical density of 0.6 at 600 nm, IPTG (1 mM) was added and the cultures were incubated at 24°C, for 3 hours. B. subtilis was grown at 37°C, in LB medium with vigorous agitation.
Preparation of cell extracts and subcellular fractionation
Recombinant strains of E. coli BL21 [DE3] harboring pET29c/expnl, grown as described above, were harvested by centrifugation at 3,000 × g for 15 min at 4°C. The cell pellet was washed twice with PBS and suspended in 5 × ml of 0.5 M sucrose, 250 mM EDTA and 2 mg/ml lysozyme. The suspension was incubated on ice for 30 min and centrifuged at 20,000 × g for 15 min. The supernatant was kept/saved as the periplasmic fraction. The remaining pellet was suspended in 50 mM Tris-HCI (pH 7.5), 2.5 mM EDTA and then sonicated (5 times × 30 sec, 0.5 cycle, 50% amplitude – UP200 s dr. hielscher, GmbH). After addition of MgSO4 to a final concentration 40 mM, the mixture was centrifuged at 100,000 × g for 40 min. The 100,000 × g supernatant was kept as the cytoplasmic fraction and the 100,000 × g pellet as the membrane fraction with the inclusion bodies. The pellet 100,000 × g was suspended in 1 ml of 50 mM Tris-HCl buffer pH 7.5 .
PNL activity was determined spectrophotometrically by monitoring the increase in absorbance at 235 nm of a solution containing 0.1% w/v pectin (Sigma, P-9135) in 50 mM citrate/phosphate buffer pH 6.5 at 37°C. The increase in absorbance was measured after 20 minutes of incubation. One unit of PNL activity was defined as the nmoles of unsaturated oligogalacturonides produced per minute, under the above-specified condition . Specific activity of PNL was defined as the ratio of PNL units per mg of protein extract. The absorption coefficient of unsaturated oligogalacturonides is 5500 M-1cm-1.
Electrophoresis and immunoblotting
SDS electrophoresis was performed in 10% w/v polyacrylamide gels containing 0.1% w/v SDS as described by Laemmli . Protein content was determined by the method of Bradford . Gels were stained either with Coomassie Brilliant Blue R250  or with silver nitrate . Proteins were transferred to nitrocellulose membranes following the method of Towbin et al.  and immunostained as described .
Solubilization and renaturation of inclusion bodies
The 100,000 × g pellet containing the inclusion bodies was either dissolved in 10 fold volume of 50 mM Tris-HCl pH 8.0, 5 mM NaCl, 5 mM MgCl2, 2.5 mM β-MSH, 0.1% w/v Tween 20 (DR, Denaturation – Renaturation buffer) containing 8 M urea, or in 50 mM Tris-HCl pH 8.0, 6 M guanidine hydrochloride, 1 mM DTT to a final concentration of 1 mg/ml. Solubilization of inclusion bodies was proceed at room temperature for 1 hour. In the first case the mixture was centrifuged at 100,000 × g for 20 min at 4°C and then the 100,000 × g supernate was dialyzed gradually against DR buffer containing lower concentrations of urea (6, 4, 2, 1 mM urea) and finally overnight just in DR buffer. In the second case the mixture was diluted tenfold with the same buffer and dialyzed overnight against a 100 fold volume of 50 mM Tris-HCl pH 8.0, 150 mM NaCl, 1 mM DTT and 5% glycerol. Dialysis was followed by centrifugation at 50,000 × g for 30 min at 4°C and enzyme activity was determined. In all steps 1 mM PMSF was added.
Formation of alginate beads
After 2 hours of induction with IPTG, cells were harvested at 3000 × g for 20 min and mixed with sterile water (300 mg cells/ml). Sodium alginate solution (2% v/v) was mixed with the above cell suspension at a volumetric ratio of 9:1 and the mixture was dropped with an insulin syringe into a gently stirred 1% w/v solution of BaCl2 at a volumetric ratio of 1:50. A spontaneous cross-linking reaction produced spherical hydrogel beads of barium alginate, which remained for 30 minutes at 4°C in order to stabilize the formed network. After stabilization, the beads were washed with 0.9% v/v NaCl (twice) and used immediately. All solutions that were used are sterile.
Pectin hydrolysis by the transformed bacteria encapsulated in alginate beads
Pectin hydrolysis was performed in conical flasks at 37°C under gentle stirring and each operational cycle lasts for 1 h. The substrate used was the same as for enzyme assay with the addition of LB solution (25:1 final concentration) and BaCl2 at a final concentration of 0.005% v/v in order to preserve cell viability and network stability. At the end of each cycle, beads were washed with 0.9% v/v NaCl (twice) and placed with fresh LB solution at room temperature under gentle shaking for 1 h. This procedure was repeated after each operational cycle.
- 2.Gupta MN, Guoqiang D, Mattiasson B: Purification of endo-polygalacturonase by affinity precipitation using alginate. Biotechnol Appl Biochem. 1993, 18: 321-327.Google Scholar
- 5.Alana A, Alkorta I, Dominguez JB, Llama MJ, Serra JL: Pectin lyase activity in a Penicillium italicum strain. Appl Environ Microbiol. 1990, 56: 3755-3759.Google Scholar
- 10.Lazzaroni JC, Portalier RC: Genetic and biochemical characterization of periplasmic leaky mutants of Escherichia coli K-12. J Bacteriol. 1981, 145: 1351-1358.Google Scholar
- 12.Sjöström M, Wold S, Wieslander A, Rilfors L: Signal peptide amino acid sequences in Escherichia coli contain information related to final protein localization. A multivariate data analysis. EMBO J. 1987, 6: 823-831.Google Scholar
- 20.Bergés H, Joseph-Liauzun E, Fayet O: Combined effects of the signal sequence and the major chaperone proteins on the export of human cytokines in Escherichia coli. Appl Environ Microbiol. 1996, 62: 55-60.Google Scholar
- 28.Gay NJ: Construction and characterization of an Escherichia coli strain with a uncl mutation. J Bacteriol. 1984, 158: 820-825.Google Scholar
- 29.Sambrook J, Fritsch EF, Maniatis T: Molecular cloning. A laboratory manual. 1989, Cold Spring Harbor Laboratory Press: New YorkGoogle Scholar
- 31.Yamane K, Mizushima S: Introduction of basic amino acid residues after the signal peptide inhibits protein translocation across the cytoplasmic membrane of Escherichia coli. J Biol Chem. 1988, 263: 19690-19696.Google Scholar
- 35.Hames BD, Rickwood D: Gel Electrophoresis. A practical approach. 1985, IRL Press: Oxford-Washington DCGoogle Scholar
This article is published under license to BioMed Central Ltd. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.