Cost-effective HRMA pre-sequence typing of clone libraries; application to phage display selection
- 4.6k Downloads
Methodologies like phage display selection, in vitro mutagenesis and the determination of allelic expression differences include steps where large numbers of clones need to be compared and characterised. In the current study we show that high-resolution melt curve analysis (HRMA) is a simple, cost-saving tool to quickly study clonal variation without prior nucleotide sequence knowledge.
HRMA results nicely matched those obtained with ELISA and compared favourably to DNA fingerprinting of restriction digested clone insert-PCR. DNA sequence analysis confirmed that HRMA-clustered clones contained identical inserts.
Using HRMA, analysis of up to 384 samples can be done simultaneously and will take approximately 30 minutes. Clustering of clones can be largely automated using the system's software within 2 hours. Applied to the analysis of clones obtained after phage display antibody selection, HRMA facilitated a quick overview of the overall success as well as the identification of identical clones. Our approach can be used to characterize any clone set prior to sequencing, thereby reducing sequencing costs significantly.
KeywordsPhage Display High Resolution Melting Phage Display Library Quick Overview Block Cycler
Phage display libraries consist of small antibody fragments cloned into a display phage vector, allowing efficient antibody screening and production in a bacterial system [1, 2]. Traditional antibodies are composed of a heavy- and a light-chain that need to recombine in a tetramer for the formation of a functional antibody. Because most of these random recombinations will yield non-functional antibodies, when produced as recombinant fragments in E. coli, isolation of effective antibodies demands extremely large phage libraries. Camelidae have, next to conventional antibodies, dimeric heavy chain antibodies (HCAb) that lack light chains . The variable domain of the HCAb (VHH) has a single binding domain with a specificity and affinity similar to conventional antibodies [4, 5]. In a phage display library, each phage displays a different antigen-binding domain on its surface. To isolate specific antibodies, phage particles from a library are bound to an antigen, recovered and used to infect fresh bacteria. Subsequently, phages go through several rounds of epitope binding and re-infection resulting in an enrichment of binding phages. A perfect experiment will ultimately yield groups of phages, each encoding a different antibody directed against the starting antigen. The set of phages can be used together as 'polyclonal phages', individual phages as 'monoclonal phages'. After selection, individual VHH clones are characterized to determine their specificity by ELISA and their diversity by fingerprinting/sequencing. Although ultimate identification is done using clone-insert nucleotide sequencing, pre-sequence fingerprinting is performed to reduce cost. Phage display clones are usually analysed using restriction digestion of PCR amplified VHH insert, followed by agarose gel-electrophoresis . However, this methodology is time consuming, labour intensive, has limited resolution and is not effective for the analysis of a large number of clones.
In the current study, we developed a protocol using high resolution melt curve analysis (HRMA) to visualise clonal diversity and study enrichment of clones after VHH-selection from a llama non-immune phage display library. Unlike the traditional application for melt curve analysis, where 1 base pair differences are detected through a change in melt temperature of a fully base-paired hybrid and mismatched hybrids, the current study uses differences in melt curve shape and the Tm of each melt curve to identify template nucleotide sequence similarities within a large group of unlike PCR fragments. Similar melt curve shapes represent similar DNA sequences and melt curves can be automatically and efficiently grouped using the available HRMA software.
HRMA has been used routinely for mutation scanning on patient samples with small fragments of equal size (up to 400 bp) that differ only 1 or a few nucleotides in sequence . The temperature at which the probe-template hybrid melts, distinguishes between fully base-paired hybrids from mismatched hybrids. In the current study, we developed a protocol using HRMA to identify clonal origin of VHH fragments selected from a phage display library as an alternative for DNA fingerprinting. The protocol uses the differences in melt curve shape and Tm of each melt curve to identify template nucleotide sequence similarities within a large group of samples. Although the software used for HRMA was originally designed to detect 1 bp differences between two small fragments, our results demonstrate that it is also capable of accurately analysing melt curves from longer unlike PCR fragments. HRMA is a very efficient technique to obtain a quick overview and determine if clone selection was successful. From a successful selection experiment one expects several recurring clones. When all clones are different, no enrichment has taken place and clone selection has probably failed, when all clones are identical, the success is probably also doubtful. When the ELISA negative clones contain a large recurrent set, these clones might either be well-growing but have low-affinity/are non-specific (not interesting) or high affinity clones that somehow fail to produce enough VHH in order to obtain a positive ELISA signal (interesting). HRMA is also suitable to follow clone selection; initially one expects all clones to be different, with larger clone sets emerging in later rounds of selection. When comparing HRMA to digestion analysis of the VHH fragments, HRMA analysis is a more sensitive and efficient method to determine clonal similarity. All groups identified with restriction digestion fingerprinting could also be identified by HRMA and were overall confirmed by sequence analysis. It is a simple and rapid method taking only two and a half hours to complete after PCR amplification. Furthermore, it is inexpensive, requiring only PCR, a DNA dye, and melting instrumentation. In the current study we have used the LightCycler480 for the final PCR amplification and melt curve analysis, however, any block cycler can be used for amplification and the subsequent melt analysis could then be performed with other high-resolution melting devices such as the LightScanner (Idaho Technology Inc, Salt Lake City, Utah). Multiple samples can be analysed simultaneously (HRMA facilitates analysis of up to 384 clones per microtitre plate) and groups can be assigned in an automated manner.
HRMA is very efficient to obtain a quick overview and determine if clone selection was successful. Similar groups of clones identified by restriction digestion fingerprinting were also identified by HRMA and were confirmed by nucleotide sequence analysis. HRMA is suitable for a wide variety of applications where verification and/or analysis of clonal diversity is essential, including determining clone diversity in a single-chain (sc) Fv phage library , analysis of clones obtained after in vitro mutagenesis , cDNA clones to determine allelic expression  and clones to determine methylation status of genomic regions .
ELISA and restriction digestion
Two consecutive rounds of selection were performed with a large non-immune VHH library as described previously [4, 5] on the first 548 amino acids of the huntingtin protein . From this selection, 96 individual colonies were randomly picked. To assess specific binding to the antigen of interest, ELISA was performed. In short, all 96 clones were grown first in 100 μl/well of growth medium (2xTY/Ampiciline/0,1% Glucose) for 4 hours at 37°C while shaking (220 rpm). Induction of VHH overproduction was then performed overnight after adding 20 μl of a 6 mM IPTG solution (in 2xTY/Ampiciline). A 96 well Maxisorp plate was coated with antigen overnight at 4°C. The next day; Maxisorp plates were washed twice with 1× PBS and blocked for 30 min at room temperature with 4% non-fat milk in PBS. After blocking, 50 μl of 4% non-fat milk/PBS solution was added to each well. Plates containing the VHH's were spun down at 1200 g and 4°C for 15 minutes. From each well, 50 μl of VHH-containing supernatant was added to the corresponding well of the Maxisorp plate. The Maxisorp plate was then incubated for 2 hours at room temperature while shaking (900 rpm). After incubation the plate was rinsed 3 times with PBST and 3 times with PBS. For the detection of bound VHH's, 100 μl of a 1:1000 solution of anti-myc antibody (9E10, Santa Cruz) conjugated to Horse Radish Peroxidase (HRP) in 4% non-fat milk/PBS was added to each well. The Maxisorp plate was then incubated for 2 hours at room temperature while shaking (900 rpm). After incubation the plate was rinsed 3 times with PBS containing 0.05% Tween20 and subsequently 3 times with PBS. The reaction was developed by adding an OPD-H2O2 solution to each well followed by a 35 minutes incubation at room temperature under dark conditions. Reaction was stopped by adding 50 μl/well of 1 M H2SO4. Optical densities were measured at a wavelength of 490 nm using a plate reader (Biotek, Winooski, USA). To analyse clone inserts, PCR was performed on all 96 clones on a standard block cycler (Bio-Rad, Hercules, CA) using 1 μl of overnight culture with the following primers: M13R 5'-CAGGAAACAGCTATGAC-3' and MPE25WB 5'-TTTCTGTATGGGGTTTTGCTA-3'. Amplification was performed in 1× PCR buffer, 0.7 U FastStart Taq DNA polymerase (Roche, Mannheim, Germany), 200 μM dNTPs, 1 pmol of each primer in a reaction volume of 20 μl. Cycling conditions were 5 min at 95°C followed by 35 cycles of 40 sec at 95°C, 40 sec at 55°C and 1 min at 72°C, followed by a final incubation of 5 min at 72°C. DNA fingerprint analysis was performed on 10 μl PCR product digested for 2 hr at 37°C in a total volume of 20 μl containing, 1× reaction buffer and 1 U HinfI (Fermentas, Burlington, Canada) and digests were run on a 3% agarose gel.
High resolution melt curve analysis
Amplification for HRMA was performed on 2 μl of 1:1000 dilutions of previously amplified clones using the same primers as in the first PCR reaction in a 10 μl reaction volume containing 1× LightCycler® High Resolution Melting Master (Roche), 2 mM MgCl2, and 3 pmol of each primer. All samples were amplified in duplicate in the Lightcyler®480 (Roche) and this was followed by melt curve acquisition. Initial denaturation of 10 min at 95°C was followed by 30 cycles of 10 sec at 95°C, 30 sec at 55°C and 20 sec at 72°C. After a final extension of 5 min at 72°C, melt curve acquisition started with a hold of 1 min at 95°C followed by 1 min at 40°C and ramping from 60°C to 98°C at 1°C/sec with 25 acquisitions per °C. Grouping of the clones was done using the Genescanning module of the Lightcyler®480 Software Release 1.5.0 (Roche). The sample with the highest melting temperature was selected from the normalized and temperature shifted melt curves and used as baseline for the difference plot analysis. After the software had calculated the groups, they were checked manually to ensure that samples with identical melt curves were assigned to their appropriate groups. Because the software could only assign 8 groups at once, analysis was done three times. For the second and third round of analysis, all samples assigned to groups in the previous rounds were omitted until all samples had been clustered.
The phage display library was kindly provided by Unilever Research Vlaardingen, The Netherlands. This work was partly funded by the CHDI Foundation.
- 5.Verheesen P, de Kluijver A, van Koningsbruggen S, de Brij M, de Haard HJ, van Ommen GJ, et al: Prevention of oculopharyngeal muscular dystrophy-associated aggregation of nuclear poly(A)-binding protein with a single-domain intracellular antibody. Hum Mol Genet. 2006, 15: 105-111. 10.1093/hmg/ddi432.CrossRefGoogle Scholar
This article is published under license to BioMed Central Ltd. This is an Open Access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.