Characterization of the total and viable bacterial and fungal communities associated with the International Space Station surfaces
The International Space Station (ISS) is a closed system inhabited by microorganisms originating from life support systems, cargo, and crew that are exposed to unique selective pressures such as microgravity. To date, mandatory microbial monitoring and observational studies of spacecraft and space stations have been conducted by traditional culture methods, although it is known that many microbes cannot be cultured with standard techniques. To fully appreciate the true number and diversity of microbes that survive in the ISS, molecular and culture-based methods were used to assess microbial communities on ISS surfaces. Samples were taken at eight pre-defined locations during three flight missions spanning 14 months and analyzed upon return to Earth.
The cultivable bacterial and fungal population ranged from 104 to 109 CFU/m2 depending on location and consisted of various bacterial (Actinobacteria, Firmicutes, and Proteobacteria) and fungal (Ascomycota and Basidiomycota) phyla. Amplicon sequencing detected more bacterial phyla when compared to the culture-based analyses, but both methods identified similar numbers of fungal phyla. Changes in bacterial and fungal load (by culture and qPCR) were observed over time but not across locations. Bacterial community composition changed over time, but not across locations, while fungal community remained the same between samplings and locations. There were no significant differences in community composition and richness after propidium monoazide sample treatment, suggesting that the analyzed DNA was extracted from intact/viable organisms. Moreover, approximately 46% of intact/viable bacteria and 40% of intact/viable fungi could be cultured.
The results reveal a diverse population of bacteria and fungi on ISS environmental surfaces that changed over time but remained similar between locations. The dominant organisms are associated with the human microbiome and may include opportunistic pathogens. This study provides the first comprehensive catalog of both total and intact/viable bacteria and fungi found on surfaces in closed space systems and can be used to help develop safety measures that meet NASA requirements for deep space human habitation. The results of this study can have significant impact on our understanding of other confined built environments on the Earth such as clean rooms used in the pharmaceutical and medical industries.
KeywordsInternational Space Station Microbiome 16S rRNA ITS Environmental surface Built microbiome Propidium monoazide Microbial diversity
The International Space Station (ISS) is the largest human space platform in low Earth orbit (~ 400 km above Earth’s surface) and for the last 17 years it has been continuously inhabited by an international community of astronauts performing space research. The ISS is a hermetically sealed closed system, subjected to microgravity, radiation, elevated carbon dioxide, and the recirculation of air through HEPA filters and is considered an “extreme environment” [1, 2]. Microbes are known to survive and even thrive in extreme environments, and the microbes that are present on the ISS may have existed since the inception of the ISS while others may be introduced each time new astronauts or payloads arrive.
Since the beginning of the ISS, routine microbial monitoring of surfaces, air, and water has occurred using culture-based techniques as per the National Aeronautics and Space Administration’s (NASA) operations and maintenance requirement procedures . However, culture-based analysis limits our understanding of the diversity of microbes that grow and thrive on the ISS because only a small fraction of organisms in a given environment can be cultured under standard laboratory conditions . Molecular methods, such as quantitative polymerase chain reaction (qPCR) and targeted amplicon sequencing, which can identify and quantify both culturable and unculturable organisms provide a more thorough assessment of what is actually present and in what amounts . However, while it has been recently shown as a proof of concept that PCR  and amplicon sequencing can be performed on the ISS [7, 8], microbial monitoring of the ISS with molecular-based methods is not routinely used because of the lack of simple, compact, and reliable sample processing instruments onboard the ISS. Once such devices are available, rapid, real-time microbial detection, functional analysis are possible for the long duration missions, but baseline information about the ISS environmental microbiome is still needed.
The importance of cataloging the ISS microbiome, which consists of both culturable and unculturable microbes, parallels the surge in research into the “built microbiome” here on Earth. Emerging studies on the microbiome of homes [9, 10, 11], offices, classrooms, museums [12, 13], and hospitals [5, 14, 15] have revealed an assemblage of bacteria, fungi, viruses, and protozoa unique to that indoor environment that are influenced by a variety of factors such as building design, ventilation, humidity, air pressure and flow, occupant numbers, or activities performed [16, 17]. Specific microbes in these indoor spaces have been shown to impact human health by influencing our susceptibility to allergies, infectious diseases, or sick building syndrome . The influence of the indoor microbiome on human health becomes more important for astronauts during flights due to altered immunity associated with space flight [19, 20] and the lack of sophisticated medical interventions that are available on Earth.
In light of an upcoming new era of human expansion in the universe, such as future space travel to Mars, the microbiome of the closed space environment needs to be examined thoroughly to identify the types of microorganisms that can accumulate in this unique environment, how long they persist and survive, and their impact on human health and spacecraft infrastructure. For this reason, the National Research Council (NRC) Decadal Survey recommended that NASA establish a coordinated, large-scale Microbial Observatory program within the ISS platform . As part of this NASA initiative, the microbial communities on ISS surfaces from eight defined locations over three flight missions, spanning 14 months, were characterized using culture-based techniques, qPCR, and amplicon sequencing of the 16S rRNA gene and internal transcribed spacer (ITS) region. Before DNA extraction, half of the sample was treated with propidium monoazide (PMA) so that the microbiome of intact/viable cells (PMA treatment) could be characterized. The PMA-untreated samples yielded information about the total microbial population (including free DNA, dead cells, cells with a compromised cell membrane, intact cells, and viable cells). PMA binds to DNA, making the DNA unavailable for amplification during PCR steps . Due to its higher molecular weight and/or charge, PMA cannot penetrate into cells that have an intact cell membrane (i.e., viable) but can bind to free floating DNA or DNA inside cells with a compromised cell membrane (i.e., dead cells) [22, 23]. It is in this way that many studies have utilized PMA to distinguish between intact/viable cells and compromised/dead cells [2, 24, 25, 26].
This comprehensive analysis of the ISS microbiome was used to assess how microbial communities change over time (temporal distribution) and throughout the ISS (spatial distribution). In addition, the ISS environmental microbiome data were compared with other Earth built environmental microbiome data such as the Earth Microbiome Project , Hospital (, Qiita study 10,172), and Office microbiome (, Qiita study 10,423). The implementation of novel molecular techniques to monitor intact microbial populations in this unique environment opens a possibility for broadening the current surveillance practices to maintain the health of the crew and to promote advances in deep space human habitation in the future.
Description of ISS locations and associated metadata, from which surface swabs were collected
Port panel next to cupola
Waste and hygiene compartment
Node 3 “F4”
Advanced resistive exercise device (ARED) foot platform
Permanent multipurpose module (PMM) Port 1
Lab 3 overhead
Port crew quarters, bump out exterior aft wall
Flight 1 (F1)
Flight 2 (F2)
March 4th 2015
May 15th 2015
May 6th 2016
Crewmember who performed sampling
Cultivable microbial population
Fungi were also cultured from the ISS, ranging from 1.1 × 105 to 3.1 × 108 CFU/m2. While, there were no statistically significant differences in fungal load over time, the highest average was found during F1 and the lowest at F2 (Fig. 2a). Similar to what was observed with bacterial counts, no differences in fungal counts were evident across the eight locations (Fig. 2b). When compared to bacteria, the fungal population was lower by 2 to 3 logs at all locations except at L6 where fungal load was 100-fold more than bacterial load (Fig. 2b). Due to the high variability between samples, there were no statistically significant differences overall in the average cultivable counts of bacteria (BA and R2A plates) from all 24 samples compared to the average fungal counts measured from the same 24 samples (P > 0.05).
Of the total bacterial and fungal isolates that grew, 133 bacterial isolates and 81 fungal isolates were identified by Sanger sequencing (16S rRNA gene for bacteria; and ITS region for fungi). The bacterial isolates belonged to three phyla: Actinobacteria, Firmicutes, and Proteobacteria. At the genus level, the most predominant genera were Staphylococcus (26% of total isolates identified), Pantoea (23%), and Bacillus (11%) and at the species level, Staphylococcus aureus (10%) and both Pantoea conspicua (9%) and Pantoea gaviniae (9%) (Additional file 1: Figure S1A). Although bacterial counts were similar across all flights (Fig. 2), only members of the family Enterobacteriaceae were cultured from F3 samples (Additional file 1: Figure S1A). S. aureus isolates were tested with the Vitek 2 system (BioMerieux, France) and found to be methicillin-sensitive; however, these isolates were resistant to penicillin, erythromycin, gentamycin, and tobramycin . The whole genomes of 20 biosafety level 2 strains, isolated from these samples, have been sequenced and are publicly available .
The fungal population was dominated by Rhodotorula mucilaginosa belonging to the family Sporidiobolaceae (41% of the 81 examined fungal isolates) and Penicillium chrysogenum (15% of 81 fungal isolates) (Additional file 1: Figure S1B). The whole genome of one Aspergillus fumigatus strain (isolated from F1, L1 [cupola] sample) was sequenced, its virulence characterized, and this information reported elsewhere [30, 31].
qPCR-based microbial population
qPCR was also performed on samples that were not treated with PMA to assess the overall microbial load, which includes intact/viable cells and compromised/dead cells. The average 16S rRNA copy number was 7.1 × 109/m2 and the average ITS copy number was 5.1 × 108 m2 in these non-PMA-treated samples (Additional file 1: Figure S1D). When the 16S rRNA gene copies were summed up for all locations and all flights, no significant difference was observed with and without PMA (Additional file 1: Figure S1D). This calculation may be affected by the artificial inflation of high copy numbers in samples treated with and without PMA. For example, the highest copy numbers of a sample with 1010 copies per m2 (for example, Flight 1, Location #2) might mask the samples with 107 copies per m2 (for example Flight 1, Location #6). The difference in microbial populations between PMA and non-PMA-treated samples were substantial when the data from individual locations were considered. In general, ~ 0.68% (example: Flight 2; Location #3) to ~ 92.8% (example: Flight 3; Location #5) of the microbial load was present in the PMA-treated sample and therefore considered “viable” (Additional file 1: Figure S1E). Similar reduction in microbial abundance in PMA-treated samples when compared to untreated samples was reported in NASA spacecraft assembly facility (SAF) clean room floors (4 to 21%; ), Lunar Mars Analog Habitat floors (10 to 40%; ), and HEPA filter particulates of ISS and SAF (1.7 to 66.8%; ).
Unlike the differences observed over time, no statistically significant differences in relative abundances were observed between the eight locations (Fig. 6c, d); however, some interesting trends are worth noting: Enterobacteriaceae was well represented at each location, with the highest relative abundance observed at L1, L5, and L6. Methylobacteriaceae was also highly represented across locations except for L2, L5, and L6.
The barplot in (Additional file 1: Figure S3) provides a more detailed representation of the relative abundances of family level taxa in each sample. Upon visual inspection, it appears that bacterial diversity within a sample was the lowest during Flight 3, which consisted predominately of Enterobacteriaceae, and was the highest during F2. This observation was statistically confirmed (P < 0.05) by calculating (i) Shannon’s diversity index, which measures both taxa presence and relative abundance and (ii) taxon richness, which reports the number of unique taxa in a sample (Additional file 1: Figure S4A and B). Noteworthy, both alpha diversity (measured with Shannon’s diversity index and taxa richness) and beta diversity (measured with ALDEx2) showed no differences between PMA and non-PMA treated samples across all three flights, suggesting that the DNA recovered from the ISS were from intact/viable organisms.
When the ASVs were summarized to the genus level, 121 taxa were detected, 77 of which could be assigned to known genera (Additional file 1: Figure S5). Of those 77 genera, 68% of them are known constituents of the human microbiome and the remaining 32% are found in environments such as soil and water.
Amplicon sequencing of the fungal ITS region was performed on samples collected during F1 and F2. Since F3 exhibited low abundance of cultivable fungal counts, it was not possible to generate amplicons for further sequencing. Similar to what was done with bacterial sequences, OTU counts that were higher across controls compared to samples were removed from the dataset. For one OTU, even though the cumulative read count of the controls was 33 times lower than the samples, since the count was 300,000, it was removed from the dataset. Additional file 2: Dataset S1B shows the fungal OTU table that was used for analyses after OTUs associated with controls were removed. The SourceTracker results for the mycobiome are shown in Additional file 1: Figure S6A and the total OTU read count for the sample and control wipes is presented in Additional file 1: Figure S6B.
The fungal population consisted of four genera plus members belonging to one phylum, two classes, and four families, in addition to sequences that could not be classified (Additional file 1: Figure S7). The temporal and spatial distribution of the five most relatively abundant taxa are shown in Additional file 1: Figure S8. With the exception of Sporidiobolaceae which was higher in F2 compared to F1, there were no other statistically significant differences in fungal taxa between flights.
Unlike bacteria, fungal diversity within samples (i.e., alpha diversity) did not change between Flight 1 and 2 (Additional file 1: Figure S4C and D). Similar to what was observed with bacteria, alpha and beta diversity were similar between the PMA- and non-PMA treated samples across these two flights.
Comparison of ISS environmental microbiome with Earth microbiome
Using the unrarefied data, the unique sub-operational taxonomic units (sOTUs) present in the ISS data were also compared with other built environment datasets collected on various locations of Earth to determine whether any sOTUs appear to be unique to the ISS. For this analysis, only Flight 3 data were included since all the other built environment datasets used the same primer set. The sOTUs observed in the ISS controls were removed. There were four sOTUs that appear to be unique relative to all the built environment datasets analyzed (see Additional file 4: Table S4), although they accounted for a very small total amount of the sequence mass (~ 0.0005% of the reads). These unique sOTUs exhibited high identity to Bacteroides sp., Gottschalkia acidurici, Paenibacillus thailandensis, and Thermus thermophilus based on BLAST to nr/nt . One single sOTU belonging to T. thermophilus was unique in Flight 3 samples and was not observed in the Earth Microbiome Project, nor in other built environment datasets on Earth.
The ISS environmental microbiome was characterized from eight locations throughout the ISS during three flight sampling events over a period of 14 months. This allowed the examination of temporal and spatial distribution of microbial populations on the ISS. This is the first study to utilize culture, qPCR, and amplicon sequencing to study the surfaces of the US segment and revealed a diverse intact/viable population of bacteria and fungi that changed over time but were similar across locations.
Several studies have been carried out to measure microbiological cleanliness of the ISS environment using cultivation-based approaches since the inception of this closed system . Recently, several ISS surfaces in the US nodes  and Japanese Kibo module  were swabbed and targeted amplicon sequencing carried out. However, these studies did not measure the intact/viable microbiome which therefore could not be compared to culture counts nor provide an assessment for crew risk. Previous reports on the ISS intact/viable microbiomes on the ISS were only examined from air filters and debris collected via vacuum cleaner bag . The ISS is a unique environment and one question that is of interest to many is how this intact/viable microbiome compares to other closed, regulated environments (Additional file 1: Figure S9 and Fig. 7). The ISS environmental microbiome resembles that of animal skin surfaces rather more than the soil microbiome. This might be due to the fact that cargo sent to the space station was cleaned thoroughly, and hence soil-associated microorganisms were not present.
The predominant organisms on ISS surfaces consisted of those that are associated with humans, with some considered opportunistic pathogens on Earth. As to whether they could cause disease in astronauts on the ISS is unknown, as it would depend on the health status of each individual and how these organisms function while in the space environment. Regardless, the detection of possible disease-causing organisms highlights the importance of further genomic and transcriptomic studies to examine how these ISS microbes function in space and how they may impact astronauts’ health. Correlating viable but opportunistic pathogens with crew member health is likely to raise too many questions about access to the crew microbiome data which is not yet publicly available, and about statistical power: because the ISS has few occupants and high turnover, identifying statistically relevant trends in crew member health that correlate with environmental microbiomes is not possible. From the time the ISS was built in 1998, as of Aug 3, 2017, 222 astronauts visited the ISS, and microbial signatures left behind by previous astronauts might interfere with the predictions. Consequently, the present ISS environmental microbial metrics could not be linked to any particular crew member. Since there were no differences in community composition and richness between PMA- and non-PMA treated samples, it suggests that the DNA analyzed from these possible opportunistic pathogens residing on the ISS environmental surfaces are indeed intact/viable and not dead organisms.
Noteworthy, approximately 46% of intact/viable bacteria and 40% of intact/viable fungi could be cultured with the culture media used during this study. This percentage is high when compared to spacecraft assembly cleanrooms on Earth where only 1 to 10% of intact/viable microorganisms can be cultured . The possible explanation is that the ISS is not deprived of nutrients like spacecraft assembly cleanrooms, and while this is a hermetically sealed environment, it is exposed to microbes from astronauts (maximum six astronauts at a given time) and cargo (delivered ~ 4–6 times per year). Furthermore, no relationship was found between microbial load and sample processing time (F1: 7 days, F2: 9 days, and F3: 6 days).
Many of the organisms detected on the ISS are known to form biofilms that belong to both bacterial (Acinetobacter, Sphingomonas, Bacillus, Burkholderia, Corynebacterium, and Klebsiella)  and fungal (Penicillium, Aspergillus, Cryptococcus, and Rhodotorula)  genera. This could pose problems for astronauts if they do become infected as biofilms are known to promote resistance to antibiotics . Also, biofilm formation on the ISS could decrease infrastructure stability by causing mechanical blockages, reducing heat transfer efficiency, and inducing microbial influenced corrosion . Some of the microorganisms that were identified on the ISS that have been implicated in microbial-induced corrosion on Earth are Methylobacterium, Sphingomonas, Bacillus, Penicillium, and Aspergillus [43, 44, 45, 46]; however, the role they play in corrosion aboard the ISS remains to be determined. Elucidating the potential ability to form biofilms and the magnitude of actual biofilm formation on ISS surfaces is important during long-term space missions to maintain structural stability of the crew vehicle when routine indoor maintenance cannot be as easily performed.
As expected, culture-based analysis did not detect as many genera as that with amplicon sequencing; however, its importance should not be overlooked as species level identity of ISS microbial constituents could be obtained when isolates were available. Furthermore, isolating organisms allowed us to conduct a separate study to examine the influence of microgravity and radiation on antibiotic resistance and virulence  and to obtain whole genome sequences of organisms that grow in space, for future comparative genomics . Similar to a previous study on ISS HEPA filters, where the novel organism, Solibacllus kalamii was able to be identified only through culture analysis, this study has also allowed us to detect a recently identified novel species Enterobacter bugandensis that was associated with human disease on Earth [49, 50]. A high percentage of the cultivable population represented opportunistic pathogens such as S. aureus, Staphylococcus hominis, Staphylococcus haemolyticus, P. conspicua, Acinetobacter pittii, Klebsiella quasipneumoniae, and A. fumigatus. This could have potential health impacts on astronauts, as bacteria and fungi have been shown to be transferred between surfaces and humans upon contact . The scope of the present study was not to determine whether these microorganisms were more virulent or resistant to antibiotics than on Earth but the whole genome sequences have been published for the isolated biosafety level 2 microorganisms  and comparative genomics of these ISS isolates with Earth strains is now possible for further investigation.
Members of the family Staphylococcaceae and Enterobacteriaceae were the most predominant organisms on ISS surfaces of the US module, similar to what has been published for the Japanese module of the ISS , and were detected in almost every sample by both culture and amplicon sequencing (Additional file 1: Figure S10). Both are human-associated organisms, with Staphylococcaceae commonly found on the skin and in the nasal passage, and Enterobacteriaceae commonly associated with the gastrointestinal tract. These two taxa are also abundant in fitness centers , office buildings , and hospitals , suggesting that the ISS is similar to other built environments on Earth, in that its microbiome is shaped by human occupation . On Earth, it has been observed that incoming intensive care unit (ICU) patients have a significantly higher risk of acquiring infections if the previous occupant was a carrier, despite terminal cleaning of the bed and the room [55, 56, 57]. Thus, habitation of the same area, regardless of whether individuals interact or not, may contribute to disease spread. Further studies assessing how long organisms survive on ISS surfaces and how readily they can be passed on from one individual to another in space can lead to the development of countermeasures to minimize the spread of infections from one astronaut to another during simultaneous or even separate flight missions.
Methylobacteriaceae/Methylobacterium was also dominant across the ISS and could be cultured from several samples. This is a hardy organism that can withstand harsh conditions, such as ionizing radiation and strong cleaning detergents and has previously been found in NASA spacecraft assembly clean rooms , hospital ICUs , and the MARS500 habitat . Moraxallaceae, another abundant organism on the ISS, also thrives in harsh conditions, being present in higher relative abundances in spacecraft assembly cleanrooms , areas of the home that utilize a lot of chemicals (i.e., washing machine) , and deep sea sediment of inactive hydrothermal vents .
R. mucilaginosa was the predominant fungal isolate from the culture analysis, and belongs to the Sporidiobolaceae family which was found in high relative abundances across the ISS with amplicon sequencing. This organism can survive inside dishwashers despite high temperatures and chemical exposure .
Numerous studies conducted on Earth have shown that the type and amount of human activity in a particular location impacts that indoor microbiome [65, 66, 67] and while there were no differences in the average microbial load (by culture and qPCR) nor community structure (amplicon sequencing), it was clear that there were variations between sampling points across different locations. Among the eight locations sampled (Table 1), location #6 (permanent multipurpose module [PMM] port 1) exhibited low concentrations of cultivable (Fig. 2), viable (Fig. 3a), and total (data not shown) microbial burden. The PMM is a specific location within the Node 1 Nadir module of ISS (Fig. 1) to store bags intact as opposed to open and place them into racks. Minimum crew activities are expected in PMM location #6 and hence microbial abundance might be minimal compared to other locations that are heavily occupied by astronauts in a day to day activities such as observing window cupola (location #1), toilet (location #2), ARED exercise platform (location #3), dining table (location #4) performing several experiments, or sleeping quarters (location #8). In a study performed by Mayer et al.  in an inflated lunar/Mars analog habitat, the cultivable bacterial load was in the range of 103–105 per m2 after the student crew inhabited the analog station. There were no significant changes in microbial load between the more active areas like the laboratory and other locations, while bedroom cultivable bacterial load increased toward the end of 30-day occupation. The fungal cultivable population was lower than bacterial, but it was in the range from 102 to 104 per m2 . In contrast, the ISS results showed that cultivable microbial load were not uniform between locations and warrant more study.
In general, temporal differences were observed within the bacterial population: F2 samples had higher microbial diversity (alpha diversity) than F1 and F3 samples; only Enterobacteriaceae were cultured from F3 samples and nine out of the ten most relatively abundant family level taxa differed over the three flights. These temporal differences may be due to the different occupants onboard the ISS during each of the flight sampling session. Earth indoor microbiome studies have shown that humans shed microbes to indoor surfaces upon contact, playing a pivotal role in shaping the indoor microbiome . Similarly, a study of the inflatable Lunar/Mars analog conducted here on Earth showed differences in bacterial communities between day 0 (before human occupation) and after 30 days of habitation  showing the effects of human occupation on indoor microbial communities in a space-like environment. Of the nine astronauts that were present aboard the ISS from F1 to F2 (2 months apart), only three were present during both flights and none of the astronauts present during F1 or F2 were on the ISS during F3 sampling. Further studies that collect microbial information from astronauts in parallel with air and surface samples would help elucidate how much of an impact astronaut have toward the ISS microbiome. Unlike bacteria, fungal communities were stable over time with no temporal differences, and this could be due to the fact that fungal and bacterial communities follow different environmental determinants .
It should be noted that F3 samples were sequenced separately from the F1/F2 samples and used different but similar V4 primers (see “Materials and methods” section for more details). Due to the SpaceX-7 launch failure and the uncertainty of when F3 sampling kits would be flown to the ISS for sampling, it was not possible to sequence F3 with F1/F2. However, the samples were collected in the same manner, processed identically, and the same protocol used for DNA extraction. We do not believe that the choice of primers, nor the separate sequencing runs, have influenced the differences in temporal distribution presented in this manuscript for the following reasons: (i) Additional file 5: Table S2 shows the organisms that were statistically significantly different over time and shows the efficiency of each primer pair in detecting these organisms, which are almost identical. (ii) A metagenomics analysis was performed using the same DNA samples as for amplicon sequencing and all three flights were sequenced simultaneously and without multiple displacement amplification prior to sequencing. The family level barplot for this metagenomics data in Additional file 1: Figure S11 shows the same pattern distribution of taxa, as presented in Additional file 1: Figure S3 for the amplicon sequencing. (iii) Lastly, all statistical analyses were performed with ALDEx2 which estimates per-feature technical variation within each sample using Monte-Carlo instances drawn from Dirichlet distributions. ALDEx2 uses the centered log-ratio transformation that ensures that data are scale invariant and sub-compositionally coherent meaning that all samples are numerical consistent with each other, regardless of the total sequencing read capacity at the time of sequencing [70, 71]. This ensures that the statistical results are robust and are not influenced solely by the differential detection of ASVs that can occur during different sequencing runs.
Many 16S rRNA and ITS sequences could not be identified via amplicon-targeted analyses, but a metagenomics approach recently conducted identified 318 bacterial and fungal species in these samples . In addition, shotgun metagenome analysis carried out by Singh et al.  from the same samples revealed that reads associated with carbohydrate metabolism, amino acid derivatives and cofactors, vitamins, etc. were the highest among all three flights. Similarly, computational analyses showed that the Legionella resistome, cobalt-zinc-cadmium resistance, and multi-drug resistant resistance efflux pump were high on all flights and all locations. The shot-gun reads associated with antimicrobial resistant genes in Flight 3 increased by twofold when compared with Flights 1 and 2 which also predicted the persistence of opportunistic pathogens in Flight 3 samples . Collective beta-Lactam resistance derived from the metagenome sequence analysis shows that physical (OmpF, OmpC), transformational (penicillin-binding protein), and degradational (AmpC), and MDR efflux pump (OMP, RND, MPF) mechanisms were allocated by the microorganisms on the ISS .
Exploring the spatial and temporal distribution of intact/viable microbial populations of closed systems such as the ISS will facilitate planning of future human habitation of Moon, Mars, and beyond. Accumulation of intact/viable microbial cells in a confined environment poses a health risk to all inhabitants. This study on bacterial and fungal load and diversity across the ISS provides a comprehensive catalog of what can be found in closed space systems and can be used to develop safety measures for NASA to meet the requirements for long-term space travel or living in space. The implications of this study are not only limited to space biology but can have significant impact on cleanrooms here on Earth such as those in the pharmaceutical and medical industries.
Materials and methods
Sample kit preparation and sample collection
Sampling wipes were prepared at the Jet Propulsion Laboratory (JPL; Pasadena, CA). Briefly, each polyester wipe (9″ × 9″; ITW Texwipe, Mahwah, NJ) was folded two times and soaked in 15 mL of sterile molecular grade water (Sigma-Aldrich, St. Louis, MO) for 30 min followed by the transfer to a sterile zip lock bag . The sampling kit was assembled at NASA Ames Research Center (ARC, Moffett Field, CA). The implementation team at NASA ARC delivered the kit to the Cargo Mission Contract at Johnson Space Center (Texas) which was then transferred to Kennedy Space Center (Florida) in order to be loaded into the Space Exploration Technologies (SpaceX) Dragon spacecraft prior to launch. Each sampling kit was sent to the ISS onboard the SpaceX-5, -6, -8, rockets and returned to the Earth onboard the Russian vehicle (Soyuz TM-14) and Dragon capsule (SpX-6 or -8). Eight different locations were sampled on the ISS using the polyester wipes described above (see Fig. 1 for a summary of the sampling locations). The metadata associated with the samples and collections is summarized in Additional file 6: Table S3.
The study requirements stated that there should be no cleaning at least 4 days prior to sampling. When the cleaning occurred during the weekends, it was done at the crew’s discretion without suggestions about the specific locations, therefore following the typical routine of activities on the ISS. The disinfectant wipes that are used in the ISS contain octyl decyl dimethyl ammonium chloride (0.0399%), dioctyl dimethyl ammonium chloride (0.01995%), didecyl dimethyl ammonium chloride (0.01995%), alkyl (50% C14, 40% C12, 10% C16) dimethylbenzylammonium chloride, and dimethylbenzylammonium chloride (0.0532%). During each flight, one astronaut performed all the sampling and used the wipes to sample one square meter. A new pair of individually packed sterile gloves (KIMTEC Pure G3 White; Nitrile Clean-room Certified; Cat. HC61190) were used before sampling the next location. The crew was instructed to collect samples from the same surfaces during all three sampling sessions. A control wipe (environmental control) was taken out from the Zip lock bag, unfolded, waved for 30 s, and packed back inside a new sterile zip lock. One control wipe was included for each flight session. Similarly, an unused wipe that was flown to the ISS and brought back to Earth along with the samples served as a negative control for sterility testing. If field controls (wipes that were exposed to the ISS environment but not used in active sampling) showed any signs of microbial growth, then negative controls would be assayed for cultivable counts to check sterility of the wipes used for sampling. However, none of the field controls showed any CFUs for all three flights. The samples were stored at room temperature in orbit. After sample collection, samples were returned to Earth after 7 days for Flight 1, 9 days for Flight 2, and 6 days for Flight 3. The kits were delivered to JPL immediately after arrival to Earth at 4 °C with processing at JPL commencing within 2 h of receipt.
Sample processing took place in a ISO 7 (10K class) cleanroom at JPL. In a certified biosafety cabinet, each wipe was aseptically removed from the zip lock bag and transferred to a 500 mL bottle containing 200 mL of sterile phosphate-buffered saline (PBS; pH 7.4). The bottle with the wipe was shaken for 2 min followed by concentration with a Concentrating Pipette (Innova Prep, Drexel, MO) using a 0.22 μm Hollow Fiber Polysulfone tips (Cat #: CC08022). Each sample was concentrated to 4 mL with PBS elution fluid (Cat #). Then, 3 mL of this concentrated sample was split into two 1.5 mL aliquots. One aliquot was treated with PMA (18.25 μL of 2 mM PMA, resulting in a final concentration of 25 μM) to assess cells that were viable or had an intact cell membrane , while the second aliquot was handled in a similar manner but without the addition of PMA. The PMA and non-PMA-treated aliquots were incubated in the dark at RT for 5 min, followed by 15 min of photoactivation using the PMA-Lite™ LED Photolysis Device, specifically designed for photoactivation of PMA (Biotium, Hayward, CA). The PMA- and non-PMA -treated aliquots were then split into two 0.75 mL aliquots. One aliquot was transferred to bead beating tubes containing Lysing Matrix E (MP Biomedicals, Santa Ana, CA), followed by bead beating for 60 s using the vortex sample holder (MO Bio, Carlsbad, CA). The bead-beaten aliquot and the aliquot without bead beating were combined for their corresponding PMA-treated and non-treated samples. DNA extraction was performed with the Maxwell 16 automated system (Promega, Madison, WI), in accordance with manufacture instructions using the Maxwell 16 Tissue LEV Total RNA purification kit. A Maxwell control (MC) without any sample added in its cartridge was run concurrently with each flight sample. The extracted DNA was eluted in 50 μL of water and stored at − 20 °C until further analysis.
Estimation and identification of cultivable microbial population
The concentrated samples were diluted in PBS (up to 10−6 of each original sample) and 100 μL of each dilution was plated (in duplicate) on Reasoner’s 2A agar (R2A for environmental bacteria), Potato Dextrose Agar with chloramphenicol (100 μg/mL; PDA for fungi), and blood agar (BA for human commensals; Hardy Diagnostics, Santa Maria, CA). R2A and PDA plates were incubated at 25 °C for 7 days and BA plates at 35 °C for 2 days at which time colony forming units (CFU) were calculated. Whenever possible, a minimum of five isolates of distinct morphologies were picked from each plate, from each ISS sampling location. The isolates were then archived in semisolid R2A or PDA slants (agar media diluted 1:10) and stored at room temperature. Once a culture was confirmed to be pure, two cryobead stocks (Copan Diagnostics, Murrieta, CA) were prepared for each isolate and stored at − 80 °C. A loopful of purified microbial culture was directly subjected to PCR and the targeted fragment was amplified (colony PCR), or DNA was extracted with the UltraClean DNA kit (MO Bio, Carlsbad, CA) or Maxwell Automated System (Promega, Madison, WI). The extracted DNA was used for PCR to amplify the 1.5 kb 16S rRNA gene in order to identify bacterial strains. The following primers were used for the 16S rRNA gene amplification: the forward primer, 27F (5′-AGA GTT TGA TCC TGG CTC AG-3′) and the reverse primer, 1492R (5′-GGT TAC CTT GTT ACG ACT T-3′) [74, 75]. The PCR conditions were as follows: denaturation at 95 °C for 5 min, followed by 35 cycles consisting of denaturation at 95 °C for 50 s, annealing at 55 °C for 50 s, and extension at 72 °C for 1 min 30 s and finalized by extension at 72 °C for 10 min. The ITS region was amplified using the forward primer ITS1F (5′-TTG GTC ATT TAG AGG AAG TAA-3′)  and reverse primer Tw13 (5′-GGT CCG TGT TTC AAG ACG-3′)  to obtain a ~ 1.2 kb product. The PCR conditions were as follows: initial denaturation at 95 °C for 3 min followed by 25 cycles of 95 °C for 50 s, annealing at 58 °C for 30 s, and extension at 72 °C for 2 min, followed by a final extension at 72 °C for 10 min. The amplicons were inspected on a 1% agarose gel. When bands for products were visible, amplification products were treated with Antarctic phosphatase and exonuclease (New England Biolabs, Ipswich, MA) to remove 5′- and 3′-phosphates from unused dNTPs before sequencing. The sequencing was performed by Macrogen (Rockville, MD) using 27F and 1492R primers for Bacteria, and ITS1F and Tw13 primers for Fungi. The sequences were assembled using SeqMan Pro from DNAStar Lasergene Package (DNASTAR Inc., Madison, WI). The bacterial sequences were searched against EzTaxon-e database  and the fungal sequences against the UNITE database . The identification was based on the closest percentage similarity (> 97%) to previously identified microbial type strains.
Following DNA extraction with the Maxwell Automated system, quantitative polymerase chain reaction (qPCR), targeting the partial 16S rRNA gene (bacteria) or partial ITS region (fungi), was performed with SmartCycler (Cepheid, Sunnyvale, CA) to quantify the microbial abundance. Primers targeting the partial 16S rRNA gene were 1369F (5′-CGG TGA ATA CGT TCY CGG-3′) and modified 1492R (5′-GGW TAC CTT GTT ACG ACT T-3′) . Primers targeting the ITS region were NS91 (5′-GTC CCT GCC CTT TGT ACA CAC-3′) and ITS51 (5′-ACC TTG TTA CGA CTT TTA CTT CCT C-3′) . Each 25-μL reaction consisted of 12.5 μL of 2X iQ SYBR Green Supermix (BioRad, Hercules, CA), 1 μL each of forward and reverse oligonucleotide primers (10 μM each), and 1 μL of template DNA (PMA treated and non-treated samples). Each sample was run in triplicate; the average and standard deviation were calculated based on these results. Purified DNA from a model microbial community  served as the positive control and DNase/RNase free molecular-grade distilled water (Promega, Madison, WI) was used as the negative control in each run. The reaction conditions were as follows: a 3-min denaturation at 95 °C, followed by 40 cycles of denaturation at 95 °C for 15 s, and a combined annealing and extension at 55 °C for 35 s. The number of gene copies in the samples were determined by running a standard curve, which was generated using serial dilutions (108–102) of Bacillus pumilus SAFR-032 16S rRNA gene as described previously . The qPCR efficiency was ~ 98% for each run. The negative control values were not deducted since the values were at ~ 100 copies per 1 or 10 μL and not scalable (yielded the same results despite using 1 μL and 10 μL of DNA templates was used).
Illumina sequencing - Bacteria
Flight sampling 1 and 2
Bacterial diversity was assessed by analyzing the V4 hypervariable region of the 16S rRNA gene coding sequence. Amplification was performed with the following primer pair: forward primer, A519F (new nomenclature: S-D-Arch-0519-a-S-15), 5′-CAG CMG CCG CGG TAA-3′, and the reverse primer 802R (new nomenclature: S-D-Bact-0785-b-A-18,) 5′-TAC NVG GGT ATC TAA TCC-3′ . Expected amplicon size is 283 for Bacteria as estimated for 16S rRNA gene sequences deposited in the Silva SEED Reference Database .
Fungal diversity was assessed by analyzing the ITS1 region between 18S and 5.8S rRNA coding sequences. Amplification primers were ITS1-F_KYO2 (5′-TAG AGG AAG TAA AAG TCG TAA-3′) and ITS2_KYO2 (5′-TTY RCT RCG TTC TTC ATC-3′) . Expected amplicon length distribution is 271 ± 90 bp for Ascomycota, 284 ± 42 bp for Basidiomycota, and 216 ± 94 bp for non-Dikarya species .
PCR synthesis of SSU-V4 and ITS1 amplicons was performed using Q5 High-Fidelity PCR Kit (New England Biolabs, Ipswich, MA) according to the manufacturer’s instructions. The 40-μL reaction mixtures were incubated under the following conditions: initial denaturation at 94 °C for 3 min followed by 35 cycles of 94 °C for 30 s, 47 °C for 30 s, and 72 °C for 90 s, with a final extension at 72 °C for 5 min. Afterwards, each reaction mixture was fractionated by electrophoresis on 2% agarose gel, recovering all PCR products in the size range of 200 to 400 bp. The amplicons were isolated from gel slices using silica spin-columns , and eluted with nano-pure water. The purified amplicons were tagged with barcoded Illumina adapters using TruSeq DNA PCR-Free Library Prep Kit LT (Illumina, San Diego, CA) according to the manufacturer’s instructions. The libraries were quantified on a TBS-380 Fluorimeter (Turner BioSystems, Sunnyvale, CA) using PicoGreen dye (Invitrogen, Carlsbad, CA) as a dsDNA-binding fluorogenic reagent. The dsDNA length distribution in individual library preps was assessed by analysis on a 2100 Bioanalyzer with High Sensitivity DNA chip (Agilent Technologies, Santa Clara, CA). The libraries were pooled to be present at equimolar concentrations in each mixed sample with total concentration of 10 nM. The first mixed sample contained 20 16S rRNA-V4 libraries and 17 ITS1 libraries representing the first ISS sampling session together with corresponding controls. The second mixed sample contained 21 16S rRNA-V4 libraries and 20 ITS1 libraries representing the second ISS sampling session and corresponding controls. The two sample sets were sequenced on a NextSeq 500 Sequencing System (Illumina, San Diego, CA) with NextSeq 500/550 Mid-Output v2 Kit for 300 main and 6 index cycles.
Flight sampling 3
DNA from these samples was amplified using 1 μL of gDNA in triplicate 25 μL reactions using Platinum Hot Start PCR master mix (Thermo Fisher cat# 13000012) and custom golay barcoded primers of the 16S V4 region, 515fB (5′-GTG YCA GCM GCC GCG GTA A-3′) and 806rB (5′-GGA CTA CNV GGG TWT CTA AT-3′), (expected amplicon size ~ 291 bp) as described in the http://www.earthmicrobiome.org for 94 °C 3 min and 35 cycles at 94 °C 45 s, 50 °C 60 s, 72 °C 90 s followed by 72 °C 10 min and held at 4 °C. Triplicate reactions were then pooled into a single tube and quality assessed. The amplicons were run on a 2% agarose gel and quantified using PicoGreen to access quality and relative quantity. All samples were pooled in equal volume into a single tube and then processed through the MoBio PCR cleanup kit to remove adaptors and primers. Final cleaned pools were then sequenced on a HiSeq 2500 2 × 150 bp Rapid Run.
Illumina sequence processing—Bacteria (flight 1, 2, and 3)
For F1 and F2 samples, the forward reads were de-multiplexed by using fastq-multx v. 1.02.772, a tool from ea-utils software package , with the forward amplification primers for prokaryotes as search targets. The reads were further processed to remove all remaining sequences of the amplification primers and the Illumina TruSeq adapters from their 3′-ends using consecutively fastq-mcf v. 1.04.807 program  for exact sequence search, and agrep (http://www.tgries.de/agrep/) and treagrep (0.8.0: https://github.com/laurikari/tre/) programs for search allowing up to three mismatches between the primers/adapters and the reads to accommodate for sequencing errors. The F3 reads were demultiplexed and adaptors removed using Qiita (http://qiita.ucsd.edu) using the parameters max_barcode_errors: 1.5; barcode_type: golay_12; and phred_quality_threshold: 3.
The demultiplexed reads for F1, F2, and F3 were then processed using the DADA2 pipeline, trimming the 3′ end of the forward reads to a length of 130 bp, and setting the filter parameters to maxN = 0, maxEE = 2, trunQ = 2, and rm.phix = True. The DADA2 pipeline (https://benjjneb.github.io/dada2/index.html) was followed to obtain an amplicon sequence variant table (“ASV” table), a “higher resolution analogue of the ubiquitous OTU table”. Taxonomy was assigned used the SILVA reference database.
Illumina sequence processing—Fungi (Flight sampling 1 and 2)
The forward reads were de-multiplexed by using fastq-multx v. 1.02.772, a tool from ea-utils software package , with the forward amplification primers fungi as search targets.
The 5′-ends of the sorted reads were trimmed for a predetermined length based on the length of the corresponding amplification primer for each dataset. The reads were further processed to remove all remaining sequences of the amplification primers and the Illumina TruSeq adapters from their 3′-ends using consecutively fastq-mcf v. 1.04.807 program  for exact sequence search, and agrep (http://www.tgries.de/agrep/) and treagrep (0.8.0: https://github.com/laurikari/tre/) programs for search allowing up to three mismatches between the primers/adapters and the reads to accommodate for sequencing errors. After primers/adapters were removed, the processed reads exhibited multimodal length distribution. The reads from the fungal datasets formed three groups of 184–223 bp, 224–246 bp, and 246–282 bp length. This correlates well with known length variability of ITS sequences from different fungal phyla . Each of the three groups was separately subjected to the OTU clustering and taxonomy assignment procedures, and the results were merged together for further statistical treatment and visualization. ITS1 sequence clustering and taxonomy assignment were performed using USEARCH version 8.1.1756 . For each collection of the related datasets, the OTUs were established by selecting high-quality reads with an expected error rate not exceeding 0.5%. The selected reads were further de-replicated, sorted, clustered at the default 3% difference, and de-chimerized against the UCHIME reference dataset distributed by UNITE . Then, the reads from individual samples were filtered to exclude those with the expected error rate above 6%, and mapped to the OTUs. Taxonomy was assigned using the Warcup training dataset V1 (http://drive5.com/utax/data/utax_warcup_trainset1.tar.gz), with a bootstrap threshold of 50%.
The ITS targeted amplicon sequencing for Flight 3 samples did not yield any product to move forward in generating sequences and this might be due to the low fungal biomass of the samples.
Bar graphs and strip charts of CFU and qPCR data were plotted using Prism (GraphPad Software, version 5.0a; Irvine, CA). Significance (P < 0.05) between groups was tested with the Kruskal-Wallis test followed by Dunn’s post-hoc test.
Amplicon sequence analysis
Bacterial ASV sequences and Fungal OTUs were summarized to the family and/or genus level using QIIME . The ALDEx R package version 2  was used to statistically compare the relative abundances of bacterial family level taxa between the different flights and locations based on the expected values of 128 Dirichlet Monte Carlo instances of centered log ratio (clr) transformed data . A value of zero indicates that organism abundance was equal to the geometric mean abundance. Thus, organisms more abundant than the mean would have positive values, and those less abundant than the mean would have negative values. Significance was based on the Benjamini-Hochberg corrected P value of the Kruskal-Wallis statistical test (significance threshold P < 0.05). ALDEx2 was also used to compare fungal genus level taxa between flights and differential ASVs and OTUs between samples and controls.
The R script of SourceTracker (version 0.9.1), the contamination predictor tool, was used to assess contamination of the samples . ISS surface wipes were designated as sink and the field and Maxwell negative controls as sources. Samples were rarified to 1000 reads.
QIIME was also used to calculate Shannon’s diversity and taxa richness. Statistical analysis of Shannon’s diversity and taxa richness was performed in Prism using the non-parametric Kruskal-Wallis test with the Benjamini Hochberg FDR multiple test correction.
Genus level counts were clr transformed using the “compositions” package in R  and visualized with a heat-map created with the “gplot” package in R. Barplots, boxplots, CCA plots, and pie charts were all created in R.
Comparison of ISS environmental microbiome with Earth microbiome
The ISS environmental microbiome data were processed by Deblur 1.0.4  trimming at 90 nt with defaults except for setting —min-reads 1 to avoid filtering sequences across samples prior to merging sample sets. The published Earth Microbiome Project 90 nt BIOM table  was obtained from ftp://ftp.microbo.me. Deblur 1.0.4 90nt BIOM tables of Hospital Microbiome Project (Qiita study 10,172) and Office Succession Study (Qiita study 10,423) were obtained from Gonzalez et al.  using redbiom analysis (https://github.com/biocore/redbiom). Only the reference-hit sOTUs were used across all studies including ISS microbiome datasets. All studies were merged using the BIOM Table Python application programming interface (API). Using the API, sOTUs with fewer than 25 total observed sequences were filtered as was previously performed  and samples were rarefied to 1000 sequences per sample. The data were then imported into QIIME2 2018.11  and unique sOTUs were inserted into Greengenes 13_8  using SEPP  via the QIIME2 fragment-insertion plugin . For UniFrac, fragment insertion was performed, which was previously shown to ameliorate primer biases . Unweighted UniFrac was computed using Striped UniFrac  through QIIME2’s diversity plugin with –p-bypass-tips, principal coordinates were computed using FSVD  as used elsewhere  and the coordinates were visualized using the EMPeror  plugin in QIIME2. Unique sOTUs were assessed in a Jupyter Notebook  using the BIOM Table API.
Controls and nomenclature of the samples
Controls were taken in all steps of the study for all three flight sessions. There was a field control “CTL,” which was a wipe that was opened to the ISS environment but was not used for active sampling and a Maxwell “DNACTL,” which was water that was used during the DNA extraction steps instead of surface or control wipe samples and acted as a DNA extraction reagent control. The field controls were either treated with PMA (“CTL_P”) or left untreated (“CTL”). In total, there were ten controls analyzed during bacterial qPCR and Illumina amplicon sequencing. Likewise, for fungal analysis, the same controls were collected; however, no amplicons were generated for “DNACTL” for either flight nor CTL_P for Flight 1 during qPCR or Illumina library prep and thus were not sent for amplicon sequencing. Similarly, for qPCR and Illumina sequencing, required reagent controls were tested. The samples during this study were designated with flight session number followed by location number (sampling sites). For example, sample number “F1_3” denotes that surface materials were taken from the first flight at location 3 but sample was not treated with PMA, whereas “F1_3P” denotes that same sample was treated with PMA.
Part of the research described in this publication was carried out at the Jet Propulsion Laboratory, California Institute of Technology, under a contract with NASA. We would like to thank astronauts Captain Terry Virts (F1 and F2) and Commander Jeffrey Williams (F3) for collecting samples aboard the ISS, and the Implementation Team at NASA Ames Research Center for coordinating this effort. We would like to thank Adriana Blachowicz for helping in processing the samples at Jet Propulsion Laboratory and Dr. Douglas Botkin for coordinating the arrival of first sample set. © 2019 California Institute of Technology. Government sponsorship acknowledged.
This research was funded by a 2012 Space Biology NNH12ZTT001N grant nos. 19-12829-26 under Task Order NNN13D111T award to KV, which also funded post-doctoral fellowship for ACS and GBMM. Subcontracts to GF and RK were given through grant no. 19-12829-26. Funding for CU was supported by the NASA Postdoctoral Program.
Availability of data and materials
The data presented in this manuscript are available in the NCBI Sequence Read Archive under the accession no. SRP091672 that is under the BioProject no. PRJNA319355. The 16S rRNA and ITS sequences of the isolates were deposited in the NCBI GenBank under accession no.: KY218802-KY218904 (16S rRNA) and KY218664-KY218730 (ITS).
CU wrote the manuscript, generated all figures in the manuscript, processed the raw 16S rRNA amplicon sequencing data and analyzed the 16S rRNA gene (bacteria) and ITS region (fungi) amplicon sequencing data, and performed all statistical analyses. ACS was involved in study design, helped interpret and write the manuscript, processed the samples, and performed culture and qPCR analysis. GMM helped process samples and performed culture and qPCR analysis and generated Fig. 1 and Additional file 1: Figure S1 and S10. VS and QT prepared amplicon sequencing libraries and performed sequencing on F1 and F2 samples for bacteriome and mycobione analysis as well as processing the raw ITS region amplicon sequences. JW generated the CCA plot. TM helped in F1/F2 analyses during the early stages of the study. JM prepared amplicon sequencing libraries and performed sequencing for F3. DM performed a comparative analysis of the ISS surface and Earth microbiomes. GF and RK were involved in experimental design and provided feedback during the write up of the manuscript. FK was instrumental in science payload, metadata generation, and coordinated with astronauts in training of sample collection and return of samples back to Earth. KV was involved in early organization, study design and planning of the research project, and providing direct feedback to all authors throughout the project and during write-up of the manuscript. All authors reviewed the manuscript. All authors read and approved the final manuscript.
Ethics approval and consent to participate
No human subjects were analyzed and only environmental samples were collected.
Consent for publication
All authors participated in this study and given their consent for publishing the results.
The authors declare that they have no competing interests.
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
- 2.Checinska A, Probst AJ, Vaishampayan P, White JR, Kumar D, Stepanov VG, Fox GE, Nilsson HR, Pierson DL, Perry J, et al. Microbiomes of the dust particles collected from the International Space Station and Spacecraft Assembly Facilities. Microbiome. 2015;3:50.PubMedPubMedCentralCrossRefGoogle Scholar
- 3.NASA: MR050L microbial analysis of ISS surfaces using the surface sampler kit (SSK) in. Edited by JSC28913 MRIDM. Houston, TX: NASA; 2005.Google Scholar
- 5.Lax S, Sangwan N, Smith D, Larsen P, Handley KM, Richardson M, Guyton K, Krezalek M, Shogan BD, Defazio J, et al. Bacterial colonization and succession in a newly opened hospital. Sci Transl Med. 2017;9(391) https://doi.org/10.1126/scitranslmed.aah6500.
- 18.Mora M, Mahnert A, Koskinen K, Pausan MR, Oberauner-Wappis L, Krause R, Perras AK, Gorkiewicz G, Berg G, Moissl-Eichinger C. Microorganisms in confined habitats: microbial monitoring and control of intensive care units, operating rooms, cleanrooms and the International Space Station. Front Microbiol. 2016;7:1573.PubMedPubMedCentralCrossRefGoogle Scholar
- 21.National Research Council (U.S.). Committee for the Decadal Survey on Biological and Physical Sciences in Space. Washington, DC: National Academies Press; 2011.Google Scholar
- 29.Checinska Sielaff A, Singh NK, Allen JE, Thissen J, Jaing C, Venkateswaran K. Draft genome sequences of biosafety level 2 opportunistic pathogens isolated from the environmental surfaces of the International Space Station. Genome Announc. 2016;4(6)Google Scholar
- 30.Singh NK, Blachowicz A, Checinska A, Wang C, Venkateswaran K. Draft genome sequences of two Aspergillus fumigatus strains, isolated from the International Space Station. Genome Announc. 2016;4(4):1.Google Scholar
- 31.Blachowicz A, Knox BP, Romsdahl J, Palmer JM, Huttenlocher A, Wang CCC, Keller NP, Venkateswaran K: Characterization of Aspergillus fumigatus isolated from air and surfaces of the International Space Station. In: 13th European Conference on Fungal Genetics: April 3–6, 2016; Paris.Google Scholar
- 35.Pierson D, Botkin D, Bruce R, Castro V, Smith M, Oubre C, Ott C: Microbial monitoring of the International Space Station. In: Environmental Monitoring: A Comprehensive Handbook Edited by Moldenhauer J: DHI Publishing, LLC, River Grove, IL.; 2012.Google Scholar
- 47.Knox BP, Blachowicz A, Palmer JM, Romsdahl J, Huttenlocher A, Wang CCC, Keller NP, Venkateswaran K. Characterization of Aspergillus fumigatus isolates from air and surfaces of the International Space Station. mSphere. 2016;1(5):1–15Google Scholar
- 48.Checinska A, Kimar RM, Pal D, Mayilraj S, Venkateswaran K: Solibacillus kalamii sp. nov., isolated from the International Space Station HEPA filter system. Int J Syst Evol Microbiol 2017;67:896–901Google Scholar
- 50.Singh NK, Bezdan D, Checinska Sielaff A, Wheeler K, Mason CE, Venkateswaran K. Multi-drug resistant Enterobacter bugandensis species isolated from the International Space Station and comparative genomic analyses with human pathogenic strains. BMC Microbiol. 2018;18(1):175.PubMedPubMedCentralCrossRefGoogle Scholar
- 65.Chase J, Fouquier J, Zare M, Sonderegger DL, Knight R, Kelley ST, Siegel J, Caporaso JG: Geography and location are the primary drivers of office microbiome composition. mSystems 2016;1(2):1–18.Google Scholar
- 70.Fernandes AD, Reid JNS, Macklaim JM, McMurrough TA, Edgell DR, Gloor GB. Unifying the analysis of high-throughput sequencing datasets: characterizing RNA-seq, 16S rRNA gene sequencing and selective growth experiments by compositional data analysis. Microbiome. 2014;2:15.PubMedPubMedCentralCrossRefGoogle Scholar
- 73.Venkateswaran K, La Duc MT, Vaishampayan P: Genetic inventory task: final report, JPL publication 12–12. In., vol. 1 and 2. Pasadena, CA.: Jet Propulsion Laboratory, California Institute of Technology; 2012: 1–117.Google Scholar
- 74.Lane DJ: Nucleic acid techniques in bacterial systematics. In: Nucleic Acid Techniques in Bacterial Systematics. Edited by Stackebrandt E, Goodfellow M, vol. 1. New York: Wiley; 1991: 115–175.Google Scholar
- 82.Kwan K, Cooper M, La Duc MT, Vaishampayan P, Stam C, Benardini JN, Scalzi G, Moissl-Eichinger C, Venkateswaran K. Evaluation of procedures for the collection, processing, and analysis of biomolecules from low-biomass surfaces. Appl Environ Microbiol. 2011;77(9):2943–53.PubMedPubMedCentralCrossRefGoogle Scholar
- 83.Klindworth A, Pruesse E, Schweer T, Peplies J, Quast C, Horn M, Glöckner FO: Evaluation of general 16S ribosomal RNA gene PCR primers for classical and next-generation sequencing-based diversity studies. Nucleic Acids Res 2013, 41(1)(e1):1–11.Google Scholar
- 93.R Development Core Team R: A Language and Environment for Statistical Computing (http://www.r-project.org/).
- 97.Bolyen E, Rideout JR, Dillon MR, Bokulich NA, Abnet C, Al-Ghalith GA, Alexander H, Alm EJ, Arumugam M, Asnicar F, et al. QIIME 2: reproducible, interactive, scalable, and extensible microbiome data science. PeerJ Preprints. 2018;6:e27295v27292.Google Scholar
- 99.Mirarab S, Nguyen N, Warnow T. SEPP: SATe-enabled phylogenetic placement. Pac Symp Biocomput. 2012:247–58.Google Scholar
- 104.Kluyver T, Ragan-Kelley B, Pérez F, Granger B, Bussonnier M, Frederic J, Kelley K, Hamrick J, Grout J, Corlay S, et al. Jupyter development team. Jupyter Notebooks – a publishing format for reproducible computational workflows. Loizides, Fernando and Scmidt, Birgit (eds.) In Positioning and Power in Academic Publishing: Players, Agents and Agendas. IOS Press. 2016. pp. 87–90. https://doi.org/10.3233/978-1-61499-649-1-87.
Open AccessThis article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.