AA16, a new lytic polysaccharide monooxygenase family identified in fungal secretomes
Lignocellulosic biomass is considered as a promising alternative to fossil resources for the production of fuels, materials and chemicals. Efficient enzymatic systems are needed to degrade the plant cell wall and overcome its recalcitrance. A widely used producer of cellulolytic cocktails is the ascomycete Trichoderma reesei, but this organism secretes a limited set of enzymes. To improve the saccharification yields, one strategy is to upgrade the T. reesei enzyme cocktail with enzymes produced by other biomass-degrading filamentous fungi isolated from biodiversity.
In this study, the enzymatic cocktails secreted by five strains from the genus Aspergillus (Aspergillus japonicus strains BRFM 405, 1487, 1489, 1490 and Aspergillus niger strain BRFM 430) were tested for their ability to boost a T. reesei reference cocktail for the saccharification of pretreated biomass. Proteomic analysis of fungal secretomes that significantly improved biomass degradation showed that the presence of proteins belonging to a putative LPMO family previously identified by genome analysis and awaiting experimental demonstration of activity. Members of this novel LPMO family, named AA16, are encountered in fungi and oomycetes with life styles oriented toward interactions with plant biomass. One AA16 protein from Aspergillus aculeatus (AaAA16) was produced to high level in Pichia pastoris. LPMO-type enzyme activity was demonstrated on cellulose with oxidative cleavage at the C1 position of the glucose unit. AaAA16 LPMO was found to significantly improve the activity of T. reesei CBHI on cellulosic substrates.
Although Aspergillus spp. has been investigated for decades for their CAZymes diversity, we identified members of a new fungal LPMO family using secretomics and functional assays. Properties of the founding member of the AA16 family characterized herein could be of interest for use in biorefineries.
KeywordsFilamentous fungi Plant biomass Cellulolytic enzymes production LPMO Biofuels
auxiliary activity enzyme
carbohydrate binding module
degree of polymerization
electrospray ionisation mass spectrometry
Hidden Markov model
high-performance anion-exchange chromatography coupled with amperometric detection
inductively coupled plasma mass spectrometry
immobilized metal ion affinity chromatography
liquid chromatography coupled to tandem mass spectrometry
lytic polysaccharide monooxygenase
absorbance at 600 nm
phosphoric acid swollen cellulose
sodium dodecyl sulfate-polyacrylamide gel electrophoresis
Lignocellulosic biomass is a renewable and abundant feedstock, considered as a promising alternative to non-sustainable fossil resources for the production of biofuels, biomaterials and bio-based chemicals [1, 2]. Its transformation requires an extensive deconstruction of the plant cell wall polymers, namely the cellulose and hemicellulose polysaccharides, that are intermeshed together with lignin to form a highly resistant structure. Efficient hydrolytic enzyme cocktails are, therefore, required but are still at the present time a major bottleneck for cost-effective industrial processes.
The degradation of plant polysaccharides into simple sugars can be achieved using enzymes secreted by biomass-degrading organisms such as bacteria and filamentous fungi. These carbohydrate-active enzymes (or CAZymes) are classified in the CAZy database (http://www.cazy.org/) into several families based on their amino acid sequence similarities . Cellulases and hemicellulases, which belong to the glycoside hydrolases (GH), have been studied for more than 60 years for their ability to depolymerize cellulose and hemicelluloses. More recently, novel enzymes called lytic polysaccharide monooxygenases (LPMOs) were discovered  and raised a high interest due to their ability to boost the hydrolysis of lignocellulosic biomass . LPMOs are able to cleave glycosidic bonds using an oxidative mechanism, in the presence of oxygen atoms (coming from dioxygen or hydrogen peroxide) and an extracellular electron donor [6, 7]. Electrons can be provided by small organic compounds such as lignin fragments and plant- or fungus-derived phenols, by enzymatic systems such as cellobiose dehydrogenase (CDH) or by photocatalytic systems . All LPMOs share some common features, such as a copper-containing active site, in which the metal is coordinated by three nitrogen atoms from two histidine side chains and the N-terminal amine group that form the so-called “histidine brace” [9, 10].
LPMOs are currently grouped into six CAZy auxiliary activities (AA) families (AA9–AA11, AA13–AA15), based on a bioinformatics analysis of their amino acid sequences similarities. These families are found in several taxonomic groups, and have been shown to be active on numerous substrates. The fungal AA9 family includes enzymes active on cellulose and cello-oligosaccharides, but also polysaccharides containing β-1,4-linked glucose units such as xyloglucans, glucomannans and β-glucans [11, 12, 13]. LPMOs from the AA10 family, which are found mainly in bacteria and some viruses, are active on both chitin and cellulose . AA11 and AA13 families are found exclusively in fungi; only a few of their members, which are, respectively, active on chitin and starch components, have been characterized so far [15, 16, 17]. The fungal AA14 family was discovered recently, and two of its members showed activity on recalcitrant xylan coating cellulose fibers . Finally, the discovery in 2018 of the AA15 family revealed the existence of LPMOs of animal origin (invertebrates), active on both cellulose and chitin . These enzymes have only recently been described, and the discovery of more families and new enzyme specificities can be expected.
Cellulases, hemicellulases and LPMOs are key components of industrial cocktails dedicated to biomass degradation . The vast majority of these cocktails are based on enzymes secreted by Trichoderma reesei, a fungal species that is known for its efficient cellulolytic enzymes secretion, and benefits from decades of strain improvement [21, 22]. However, the sequencing of its genome revealed a surprisingly small number of genes involved in polysaccharides degradation [23, 24], and several missing accessory activities . With only three AA9 LPMOs encoded in its genome, T. reesei has one of the smallest sets of LPMOs among fungal saprotrophs, which are usually rich in AA9 with up to 40–50 genes .
To compensate this lack of diversity, which may be a bottleneck for T. reesei cocktails improvement, one strategy is to upgrade T. reesei cocktails with enzymes from other biomass-degrading filamentous fungi isolated from biodiversity. Such enzymes can be found by mining the sets of secreted enzymes (i.e, secretomes) produced by fungal strains on various carbon sources, thanks to the development of protein identification tools such as LC–MS/MS and the increasing number of available annotated fungal genomes [27, 28]. Since a large panel of CAZymes and LPMOs are differentially secreted by fungal saprotrophs [29, 30], comparative secretomics is a promising approach to discover novel enzymes playing a role in plant biomass deconstruction. Herein, we report the identification of a new LPMO family among Aspergillus spp. secretomes improving the conversion of plant biomass. One member of this new LPMO family, termed AA16, was characterized in terms of substrate specificity, regioselectivity of oxidation and contribution to cellulose degradation.
Exploration of fungal secretomes to improve biomass saccharification
During previous screenings of fungal strains for their biomass-degradation ability, several strains of the Aspergillus genus appeared promising . In the present study, four strains of Aspergillus japonicus and one strain of Aspergillus niger were grown in the presence of three inducers [maize bran (MB), sugar beet pulp (SBP) and cellulose (Avicel)] to favor the secretion of diverse lignocellulose-active enzymes. After 7 days of growth, the 15 different secretomes (Additional file 1: Table S1) were tested for their ability to improve a reference T. reesei cocktail obtained from strain CL847 [32, 33] for the saccharification of three dilute-acid steam-exploded biomasses: wheat straw, Miscanthus and poplar.
Concerning Miscanthus, a total of 10 secretomes among the 15 tested were able to significantly improve the cellulose conversion yield (Fig. 1c), after 24 h and/or 96 h of reaction. Interestingly, the secretomes of A. japonicus BRFM 405 and A. niger BRFM 430 produced on all of the 3 inducers were able to boost Miscanthus saccharification, while none of the secretomes of the A. japonicus BRFM 1489 strain had an effect on yield. As for the two remaining strains (A. japonicus BRFM 1487 and 1490), their secretomes produced on lignocellulosic substrates (MB and SBP) improved the glucose yield by 9 to 16%, while their secretomes produced on Avicel did not lead to any significant improvement. This demonstrates that not only the strain, but also the inducer has an effect on the biomass degradation ability of the produced enzyme cocktails. Concerning the time effect, it can be noticed that all secretomes produced on MB and SBP have a lower effect after 96 h of reaction than after 24 h, which can be explained by the fact that the higher the yield, the more it becomes difficult to improve it when approaching the saccharification plateau. The secretomes of strains BRFM 405 and 430 produced on Avicel show the opposite effect, with a greater yield improvement at 96 h, which could mean that the enzymes responsible for the boost act more slowly than those of other secretomes. Overall, these results show that several Aspergillus secretomes are able to improve biomass saccharification, and that the enzymes responsible for the boost are probably different from one secretome to another.
Comparative proteomic analysis of fungal secretomes
To understand the differences in terms of enzyme composition between these fungal secretomes, proteomic analyses were performed by liquid chromatography coupled to tandem mass spectrometry (LC–MS/MS), and the detected peptides were assigned using the public genomes of A. niger and A. aculeatus. This latter species is very close to A. japonicus, and the two species are identical in some classifications , which explains our decision to use the A. aculeatus genome to identify and annotate A. japonicus proteins.
The composition of each secretome that showed an improvement of saccharification was further examined, with special attention for proteins of putative or unknown function. Among other proteins, our attention was dragged to a protein of unknown function (ortholog of A. aculeatus XP_020060743.1), which was found only in MB and SBP secretomes of A. japonicus BRFM 1490 that increased Miscanthus saccharification (Fig. 1c). Interestingly, orthologs of this protein are not found in the T. reesei genome. As revealed by sequence analyses, this protein displays some common structural features with known LPMOs. For instance, its N-terminal residue after signal peptide cleavage is a histidine residue. A deeper analysis of the mass spectrometry data obtained from A. japonicus BRFM 1490 secretome revealed that the N-terminal peptide displays a methylated histidine (mass + 14.0157 Da), a feature commonly observed in fungal LPMOs.
Bioinformatic analysis of a new LPMO family
The protein of unknown function (ortholog of A. aculeatus XP_020060743.1) identified in the fungal secretomes is part of a putative LPMO family that has been reported in a genome mining approach using a HMM model developed by Voshol et al. . Without any experimental demonstration of activity, this family could not be added to the CAZy database, which contains only biochemistry-based families. In the absence of biochemical characterization, this family was temporarily called X273.
The sequences of 208 X273 modules (edited to remove the CBM1, C-terminal extension or GPI anchor) from 107 organisms representative of major taxons were aligned and used to build a phylogenetic tree (Fig. 3b), in which five major clades can be distinguished. Clades 1 and 2 group together enzymes from Ascomycetes and Basidiomycetes that have likely been kept from a common ancestor of these two phyla. Conversely, clade 3 gathers only Ascomycetes sequences (except two sequences from Cryptococcus sp. that could have been acquired by horizontal gene transfer ) and clade 4 consists of Basidiomycetes sequences only, indicating that these sequences evolved after the split between these two phyla. Finally, clade 5 displays sequences from Oomycetes and one sequence from the basidiomycete Cronartium quercuum, which could mean that these sequences were kept from a common ancestor of Oomycetes and Fungi, or could also be the result of a horizontal gene transfer. Interestingly, the sequences belonging to proteins containing a CBM1 or a GPI anchor are not spread across the tree but are gathered, respectively, in clades 1 and 4, suggesting that the X273 modules of these groups may have evolved for distinct functions.
Sequence alignment of the modules reveals several well-preserved regions within the family (Additional file 1: Figure S2). All sequences include an N-terminal histidine, as well as a second strictly conserved histidine, which is a characteristic of the copper binding site (Histidine brace) of all LPMOs characterized so far. There are about twenty other highly conserved residues, including a conserved Q-T/N-Y motif that fits the N/Q/E-X-F/Y motif identified by Vu et al.  in families AA9, AA10, AA11 and AA13, containing the tyrosine or phenylalanine residue taking part in the coordination of copper in the active site.
Heterologous expression and purification
The X273 protein of A. aculeatus (Genbank ID XP_020060743.1) was produced in Pichia pastoris without its C-terminal extension. The recombinant protein bearing a C-terminal polyhistidine-tag was first produced in flasks in the presence of trace metals including copper and purified from the culture supernatant by immobilized metal ion affinity chromatography (IMAC), following the same protocol used for AA9 LPMOs . The produced protein had a size of ~ 38 kDa, higher than the expected 21 kDa, attributable to N- and/or O-glycosylation. N-terminal sequencing revealed that in approximately 30% of the sample, the protein was deprived of the N-terminal residue, an heterogeneity that is frequently encountered in the production of recombinant proteins and could be due to peptide bond cleavage by locally produced reactive oxygen species [38, 39]. The rest of the sample did not contain the expected N-terminal histidine, which was replaced either by an aspartate residue or by other non-identified modifications. Recent reports have shown that in LPMOs, the residues surrounding the copper are particularly prone to oxidation [7, 40]. The N-terminal histidine of A. aculeatus X273 could have been modified into aspartate, 2-oxo-histidine or other intermediate products due to metal-catalyzed oxidation in the presence of copper as described in [41, 42, 43], most probably leading to an inactive enzyme.
Alternatively, the same recombinant X273 protein was produced in a bioreactor in the presence of trace metals including copper. A glycerol batch phase was followed by an induction fed-batch phase using methanol (Additional file 1: Figure S3). An aliquot of the culture supernatant was purified by IMAC, to reach a final purified protein production yield of 0.5 g per liter of culture. N-terminal sequencing showed the expected sequence with an intact N-terminal histidine in over 90% of the produced protein, while the cleaved sequence represented only less than 10%.
Substrate specificity and regioselectivity of cleavage
Preliminary enzyme activity assays were performed using the P. pastoris bioreactor supernatant that contains a major band at ~ 38 kDa and the purified A. aculeatus X273 on phosphoric acid swollen cellulose (PASC). The soluble degradation products were characterized using high-performance anion-exchange chromatography coupled with amperometric detection (HPAEC–PAD), and the assay carried out using the bioreactor supernatant revealed an important release of soluble cello-oligosaccharides (DP2-DP6, see Additional file 1: Figure S4), which was a good starting point for further investigations. However, the protein purified by IMAC displayed reduced activity on cellulose, even tested at high protein loading (Additional file 1: Figure S4), suggesting that the purification using the standard IMAC column was detrimental for the activity of this enzyme. Therefore, the protein was purified to homogeneity by ion exchange chromatography (Additional file 1: Figure S5). ICP-MS analysis was used to confirm the presence of copper in the active site, with ~ 1 copper atom per protein molecule. The purified X273 protein from A. aculeatus was able to produce hydrogen peroxide without substrate in the presence of l-cysteine and ascorbate (Additional file 1: Figure S6), which is a common feature for LPMOs .
Altogether, the results suggest that the characterized protein is a copper-containing enzyme able to produce hydrogen peroxide in the absence of substrate and able to oxidatively cleave cellulose with C1 regioselectivity. The enzymatic characterization of A. aculeatus enzyme establishes that the enzyme has LPMO activity, and therefore, family X273 was renamed AA16 in the CAZy database. Consequently, A. aculeatus X273 is named AaAA16.
The A. aculeatus AA16 LPMO characterized in this study shares many features with fungal LPMOs from other families, including (i) two strictly conserved histidines forming the copper histidine brace, (ii) methylation of the first histidine residue in fungal secretomes, (iii) the presence of one copper atom per protein and production of hydrogen peroxide (iv) ability to cleave cellulose and cello-oligosaccharides while producing C1-oxidized products, (v) synergy with CBHI for the degradation of cellulose. Although its sequence and its modularity have long suggested that the family may have LPMO activity, none of its members has been biochemically characterized so far, possibly due to recombinant production and handling problems. AaAA16 is indeed a challenging enzyme and we faced difficulties in obtaining a functional protein due to self-oxidation of the recombinant enzyme produced in flasks and inactivation during the affinity chromatography purification. Oxidation of the N-terminal histidine of LPMOs is a frequently encountered issue due to the formation of reactive oxygen species at the active site in the presence of copper. Recently, it was hypothesized that the methylation of this residue in fungi could be a protective mechanism against self-inactivation of the enzyme . This post-translational modification is lacking in P. pastoris, which could lead to consider the use of another host organism such as A. niger for recombinant expression of AA16 enzymes. However, in the case of AaAA16, we managed to circumvent this problem with the set-up of a bioreactor production which led to a functional enzyme.
Another noticeable feature of this new LPMO is its atypical product profile, which differs from those of other fungal LPMOs active on cellulose. Indeed, the ratio of C1-oxidized vs. non-oxidized products is much lower than those of so far characterized AA9 enzymes, suggesting that the two families may have a different reactivity. More generally, the differences existing between AA9 and AA16 enzymes are of interest, considering that these two fungal LPMO families seem to be targeting the same substrate. It can be noted that the gene expansion of the AA16 family, with an average of 5.7 sequences per genome for Oomycetes and 1.8 for Fungi, is strikingly lower than in the AA9 family, many fungal species having over 30 AA9 genes in their genome . Moreover, cellobiose dehydrogenase (CDH), which is a well-established enzymatic redox partner of AA9 LPMOs, was not found in the A. japonicus BRFM 1490 secretomes. Interestingly, in vitro assays with a recombinant CDH from Podospora anserina did not seem to promote AA16 activity (Additional file 1: Figure S8). This observation could reveal a difference in the activation of this LPMO family compared to AA9 LPMOs. The secretomic analysis also revealed that two AA9 enzymes, including one with a CBM1, are co-secreted with A. japonicus AA16, which could indicate that they have a different biological role or a possible synergistic effect.
Using a comparative secretomic approach, we were able to identify and characterize the founding member of a new LPMO family that plays a role in plant biomass deconstruction, and could be of interest for biotechnological applications. Although Aspergilli species have been deeply investigated for decades and a large number of their CAZymes have been characterized, the activity of this new LPMO family had not been unveiled until now.
To better understand the action of members of this new family on plant biomass and their possible biological roles, it will be necessary to characterize other AA16 enzymes, including some multi-modular enzymes bearing a CBM1 or a GPI anchor. Further structural and spectroscopic investigations are also required to provide insights into the mechanism of the AA16 family.
Materials and methods
Preparation of secretomes
The Aspergillus japonicus and Aspergillus niger strains used in this study are maintained in the collection of the “Centre International de Ressources Microbiennes—Champignons Filamenteux” (CIRM-CF, INRA, Marseille, France; http://www.inra.fr/crb-cirm/) under accession numbers BRFM 405, 430, 1487, 1489 and 1490. They were grown on agar medium containing 20 g L−1 malt extract and 1 g L−1 yeast extract.
Liquid culture media containing sugar beet pulp or an autoclaved fraction of maize bran (supplied by ARD, Pomacle, France) as carbon sources and protein secretion inducers were prepared as follows: 15 g L−1 inducer; 2.5 g L−1 maltose; 1.84 g L−1 diammonium tartrate as nitrogen source; 0.5 g L−1 yeast extract; 0.2 g L−1 KH2PO4; 0.0132 g L−1 CaCl2·2H2O and 0.5 g L−1 MgSO4·7H2O. Another inducing medium was prepared using 4 g L−1 Avicel (Sigma-Aldrich, Saint-Quentin Fallavier, France); 10 g L−1 xylose; 1.8 g L−1 diammonium tartrate; and the same amounts of yeast extract and minerals as before. The three culture media were inoculated with 2.105 spores/mL for each of the five strains, and incubated in the dark in baffled vials, at 30 °C under rotary agitation at 105 rpm (Infors, Massy, France).
After 7 days of incubation, the cultures were stopped and the liquid medium was separated from the mycelium using Miracloth (Merck-Millipore, Darmstadt, Germany). Each secretomes (40 mL) was filtered on a 0.22-µm polyether sulfone membrane (Merck-Millipore) and diafiltered on a polyether sulfone membrane with a 10-kDa cut-off (Vivaspin, Sartorius, Göttingen, Germany) with 50 mM sodium acetate buffer pH 5.2 to a final volume of 2 mL. The secretomes were stored at − 20 °C until use. Their total protein concentration was evaluated by the Bradford (Protein Assay, BioRad, Ivry, France) and BCA (Bicinchoninic Acid Protein Assay, Sigma-Aldrich) methods using a bovine serum albumin (BSA) standard.
LC–MS/MS protein identification
For each secretome, 15 µg of proteins was loaded on a 10% Tris–glycine precast SDS-PAGE gel (Mini-PROTEAN TGX, BioRad). After a short migration (0.5 cm) in the stacking gel, the gels were stained with Coomassie blue (BioRad) and each electrophoresis track was cut into two 2-mm-wide strips. Proteomic identification was performed at the Plate-forme d’Analyse Protéomique de Paris Sud-Ouest (PAPPSO, INRA, Jouy-en-Josas, France; http://pappso.inra.fr/), according to a protocol described in . Briefly, the digestion of the proteins contained in the gel strips was carried out according to a standard trypsinolysis process, using modified trypsin (Promega, Charbonnières-les-Bains, France). Peptide analysis was performed by Ultimate 3000 RSLCnano liquid chromatography (Thermo Fisher Scientific, Waltham, Massachusetts, USA) coupled to a Q-exactive mass spectrometer (Thermo Fisher Scientific) using electrospray ionization. Peptide attribution and protein annotation were performed by comparing mass spectrometry data to predicted proteins in the genomes of Aspergillus niger (http://www.uniprot.org/) and Aspergillus aculeatus (https://genome.jgi.doe.gov/Aspac1/Aspac1.home.html), as well as an internal contaminant database, using X!Tandem Cyclone software (X!Tandem, Jouy-en-Josas, France). The protein annotation was completed manually by BlastP using the NCBI nr database (https://blast.ncbi.nlm.nih.gov) and the CAZy families were annotated using the CAZy database.
Saccharification assays with secretomes
Wheat straw, Miscanthus and poplar were obtained from IFP Energies Nouvelles (Rueil-Malmaison, France). Biomass were pre-treated by steam explosion under acidic conditions, washed in hot water to remove free products, and dried at 55 °C. After 1 week at room temperature, they were shredded and sieved to a 0.8-mm maximal size.
The reference K975 cocktail, supplied by IFP Energies Nouvelles, was obtained by growing T. reesei strain CL847 in the presence of lactose, and has a specific β-glucosidase activity of 0.8 IU/mg. It was complemented by SP188, a commercial cocktail of β-Aspergillus niger glucosidases (Novozyme, Bagsværd, Denmark).
Saccharification tests were performed in 96-well plates using 5% (w/v) biomass in 50 mM sodium acetate buffer (pH 4.8) containing 0.1 g L−1 chloramphenicol, with a K975 enzyme loading of 5 mg g−1 of dry matter (DM) and a total β-glucosidase activity of 80 UI/g DM. 10 µL of 1:10 diluted secretomes were added, replaced by 10 µL of buffer for the reference conditions. Each microplate contained seven replicates of each condition, as well as control conditions with biomass alone and enzymes alone. The sealed plates were incubated at 45 °C under rotary agitation at 850 rpm for 24–96 h. At each sampling time, plates were centrifuged and the supernatant was filtered and stored at − 20 °C. Glucose concentration was measured using the Glucose GOD-PAP reagent (Biolabo, Maizy, France) using a standard glucose range and yields were calculated taking into account the initial amount of cellulosic glucose.
Between 7 and 30 independent reactions were performed for each secretome. To combine the results of these assays, the saccharification yields obtained in the presence of secretomes were translated into a percentage of improvement compared to the internal reference of each assay. For each condition, a Student t-test was performed to determine if the mean of all the replicates was statistically different from the mean of the reference values, using the p value as a criterion.
Bioinformatic analysis of the AA16 family
208 sequences containing a X273 module were chosen from genomes in the NCBI or the JGI Mycocosm. To avoid interference from the presence or the absence of additional residues or domains, the signal peptides and C-terminal extensions were removed prior to the alignment. The resulting amino acid sequences corresponding to the catalytic domain were aligned using MUSCLE , operating with default parameters. A distance matrix was derived from the alignment using Blosum62 substitution parameters  and subsequently used to build a phylogenetic tree using an improved version of the neighbor-joining method . The tree was displayed using Dendroscope , and the visualization of consensus amino acid sequence of the catalytic module was made using WebLogo .
Cloning and production of enzymes
The nucleotide sequence coding for the AA16 of A. aculeatus (Genebank ID XP_020060743.1) was codon optimized for Pichia pastoris. The region corresponding to the native signal sequence was kept, and the C-terminal extension region was removed. Total synthesis of the genes was performed by Genewiz (South Plainfield, New-Jersey, USA) and the genes were inserted in the expression vector pPICZαA (Invitrogen, Carlsbad, California, USA) in frame with the C-terminal poly-histidine tag. Transformation of competent P. pastoris SuperMan5 cells (BioGrammatics, Carlsbad, California, USA) was performed by electroporation with PmeI-linearized pPICZαA recombinant plasmids as described in . Zeocin-resistant transformants were then screened for protein production.
The best-producing transformants were grown in 2 L of BMGY media containing 1 mL L−1 of Pichia trace minerals 4 (PTM4) salts (2 g L−1 CuSO4·5H2O, 3 g L−1 MnSO4·H2O, 0.2 g L−1 Na2MoO4·2H2O, 0.02 g L−1 H3BO3, 0.5 g L−1 CaSO4·2H2O, 0.5 g L−1 CoCl2, 12.5 g L−1 ZnSO4·7H2O, 22 g L−1 FeSO4·7H2O, NaI 0.08 g L−1, H2SO4 1 mL L−1) and 0.2 g L−1 of biotin in flasks at 30 °C in an orbital shaker (200 rpm) for 16 h, to an OD600 of 2 to 6. Expression was induced by transferring cells into 400 mL of BMMY media containing 1 mL L−1 of PTM4 salts at 20 °C in an orbital shaker (200 rpm) for another 3 days. Each day, the medium was supplemented with 3% (v/v) methanol. The cells were harvested by centrifugation, and just before purification, the supernatant had its pH adjusted to 7.8 and was filtrated on 0.45-µm membrane (Millipore, Burlington, Massachusetts, USA).
Bioreactor production was carried out in a 1.3-L New Brunswick BioFlo 115 fermentor (Eppendorf, Hamburg, Germany) following the P. pastoris fermentation process guidelines (Invitrogen), replacing the glycerol fed-batch phase by a 4-h sorbitol and methanol transition phase.
Purification by affinity chromatography
Filtered culture supernatant was loaded onto a 5-mL HisTrap HP column (GE Healthcare, Bus, France) equilibrated with buffer A (Tris–HCl 50 mM pH 7.8, NaCl 150 mM, imidazole 10 mM) that was connected to an Äkta purifier 100 (GE Healthcare). (His)6-tagged recombinant proteins were eluted with buffer B (Tris–HCl 50 mM pH 7.8, NaCl 150 mM, imidazole 500 mM). Fractions containing recombinant enzymes were pooled, concentrated, and dialyzed against sodium acetate buffer 50 mM, pH 5.2. A fraction of eluate was loaded onto 10% Tris–glycine precast SDS-PAGE gels (BioRad) that were stained with Coomassie Blue. The protein concentrations were determined by absorption at 280 nm using a Nanodrop ND-2000 spectrophotometer (Thermo Fisher Scientific) and theoretical molecular weights and molar extinction coefficient.
Purification by ion exchange chromatography
Filtered culture supernatant was loaded onto a 20-mL HiPrep DEAE FF 16/10 column (GE Healthcare), equilibrated with Tris–HCl 50 mM pH 7.8. Proteins were eluted using a linear gradient of 1 M NaCl (0 to 500 mM in 180 mL). Fractions containing recombinant proteins were pooled and concentrated. A fraction of eluate was loaded onto 10% Tris–glycine precast SDS-PAGE gels (BioRad) that were stained with Coomassie Blue. The protein concentrations were determined by absorption at 280 nm using a Nanodrop ND-2000 spectrophotometer (Thermo Fisher Scientific) and theoretical molecular weights and molar extinction coefficient.
N-terminal amino acid sequence determination
The N-terminal amino acid sequences of purified AaAA16 were determined according to the Edman degradation. Samples were electroblotted onto a polyvinylidene difluoride membrane (iBlot, Thermo Fisher Scientific). Analyses were carried out on a Procise Sequencing System (Thermo Fisher Scientific).
The ICP-MS analysis was performed as described in . The samples were mineralized, then diluted in ultrapure water, and analyzed by an ICAP Q apparatus (Thermo Electron, Les Ullis, France). The copper concentration was determined using Plasmalab (Thermo Electron) software, at m/z = 63.
Amplex Red assay
A fluorimetric assay based on Amplex Red and horseradish peroxidase was used as described previously . 96 black well plates (Greiner Bio One, Kremsmünster, Austria) containing 50 mM citrate–phosphate buffer (pH 6), 50 µM Amplex Red (Sigma-Aldrich), 7.1 U mL−1 horseradish peroxidase, 10 µM LPMOs and 50 µM reducing agent (l-cysteine or ascorbate) in a total volume of 100 µL were incubated at 30 °C for 30 min. Fluorescence was followed at a rate of one point per minute, at an excitation wavelength of 560 nm and an emission wavelength of 595 nm, using a Tecan Infinite M200 (Tecan, Männedorf, Switzerland) plate reader.
Substrates cleavage assays
Cleavage assays were performed in a 300-µL volume of water containing 0.1% (m/v) of solid substrates (PASC, Avicel, barley β-1,3/1,4-glucan, konjac glucomannan) or 1 mM of soluble substrates (cellohexaose, xylohexaose, xyloglucan oligosaccharides of known structure XXXG, XXLG, and XLLG according to the nomenclature of Fry et al. ). Avicel was purchased from Sigma-Aldrich, PASC was prepared from Avicel according to the method described by Wood et al. , and the other products were purchased from Megazyme (Bray, Ireland).
Reaction media contained AaAA16 (4.4–20 µM) and 1 mM l-cysteine. Podospora anserina cellobiose dehydrogenase PaCDHB  (2 nM) was also used as an enzymatic electron donor. Samples were incubated for 24 h in a thermomixer (Eppendorf, Montesson, France) at 45 °C and 850 rpm. The soluble products were separated from the insoluble fraction reaction by centrifuging the samples at 15,000g for 10 min.
Synergy assays between AaAA16 and T. reesei CBHI were performed in a total volume of 800 µL containing 0.1% (m/v) PASC or NFC in 50 mM pH 5.2 acetate buffer with 8 µg AaAA16 and 1 mM l-cysteine. The samples were incubated in triplicates in a thermomixer (Eppendorf) at 45 °C and 850 rpm, for 24 h. The samples were then boiled for at least 10 min and centrifuged at 15,000g for 10 min. The supernatant was removed, and the remaining insoluble fraction of the substrate was washed in buffer twice. Hydrolysis by T. reesei CBHI (0.8 µg) was performed in 800 µL of 50 mM pH 5.2 acetate buffer for 2 h at 45 °C and 850 rpm. The reaction was stopped as described above, and the soluble and insoluble fractions were separated.
Analysis of oxidized and non-oxidized oligosaccharides
Mono- and oligosaccharides in the soluble fractions resulting from substrate cleavage and synergy assays were detected by high-performance anion-exchange chromatography (HPAEC) coupled with pulsed amperometric detection (PAD) (Dionex, Thermo Fisher Scientific), according to the method described by Westereng et al.  using non-oxidized cello-oligosaccharides (DP2–DP6) as standards (Megazyme). Briefly, the eluents were 0.1 M NaOH (eluent A) and 1 M NaOAc in 0.1 M NaOH (eluent B). Elution was performed at a constant flow rate of 0.25 mL/min at 30 °C, using a linear gradient of 0–10% eluent B over 10 min, 10–30% eluent B over 25 min, and an exponential gradient of 30–100% eluent B in 5 min. The initial condition (100% eluent A) was then restored in 1 min and maintained for 9 min to recondition the column.
Mass spectrometry experiment (MS/MS) were performed on a Synapt G2Si high-definition mass spectrometer (Waters Corp., Manchester, UK) equipped with an Electrospray ion (ESI) source. After the ion precursor selection and prior the fragmentation step, ion mobility (IM) was activated to reduce interference from sample impurities. IM was performed in a traveling-wave ion mobility (TWIM) cell. Helium flows was held at 180 mL min−1 in the helium cell and nitrogen flow was adjusted at 90 mL min−1 in the mobility cell. The IM traveling wave height was set to 40 V, and its wave velocity was set to 300 m s−1. After passing through the mobility cell, oxidized species were fragmented by collision-induced dissociation in the transfer cell of the instrument (MS/MS). In these experiments, samples were diluted tenfold in MeOH/H2O (1:1, v/v) and infused at a flow rate of 5 μL min−1. Acquisitions were conducted in negative polarity, as well as in ‘sensitivity’ mode.
CFC and DN prepared the secretomes and performed the saccharification tests. DC performed the proteomic analysis and CFC analyzed the data which led to the identification of the target enzyme. BH performed the bioinformatic analyses. CFC, MH, SG and IHG produced recombinant proteins in flasks and bioreactors. CFC and SG performed substrate degradation tests and HPAEC–PAD analyses. MF identified oxidized products using mass spectrometry. CFC performed synergy assays. JGB, SHB and AM supervised the work. The manuscript was written by CFC with contributions from JGB. All authors made comments on the manuscript and approved the final version. Figures were prepared by CFC and SG. All authors read and approved the final manuscript.
The authors would like to thank Amani Chalak and Aurore Labourel (INRA Marseille) for the preparation of PASC, as well as Florence Chaspoul from IMBE (CNRS Marseille) for ICP-MS analysis and Pascal Mansuelle from the IMM proteomics platform (CNRS Marseille) for N-terminal sequencing. They also thank Hélène Rogniaux and David Ropartz (INRA Nantes) for their help to identify oxidized products using mass spectrometry, the members of the CAZy database (Matthieu Hainaut, Elodie Drula, Pascal Lapébie, Vincent Lombard) for their analysis of hundreds of fungal genomes deposited in the JGI Mycocosm portal, as well as Søren Brander and Katja Salomon Johansen (University of Copenhagen) for some enriching exchanges about LPMO activity assays.
The authors declare that they have no competing interests.
Availability of data and materials
The datasets used and/or analyzed during the current study are available from the corresponding author on reasonable request.
Consent for publication
Ethics approval and consent to participate
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
- 5.Harris PV, Welner D, McFarland KC, Re E, Navarro Poulsen J-C, Brown K, et al. Stimulation of lignocellulosic biomass hydrolysis by proteins of glycoside hydrolase family 61: structure and function of a large, enigmatic family. Biochemistry. 2010;49:3305–16. https://doi.org/10.1021/bi100009p.CrossRefPubMedGoogle Scholar
- 9.Quinlan RJ, Sweeney MD, Lo Leggio L, Otten H, Poulsen JCN, Johansen KS, et al. Insights into the oxidative degradation of cellulose by a copper metalloenzyme that exploits biomass components. Proc Natl Acad Sci USA. 2011;108:15079–84. https://doi.org/10.1073/pnas.1105776108.CrossRefPubMedGoogle Scholar
- 11.Bennati-Granier C, Garajova S, Champion C, Grisel S, Haon M, Zhou S, et al. Substrate specificity and regioselectivity of fungal AA9 lytic polysaccharide monooxygenases secreted by Podospora anserina. Biotechnol Biofuels. 2015;8:90. https://doi.org/10.1186/s13068-015-0274-3.CrossRefPubMedPubMedCentralGoogle Scholar
- 13.Fanuel M, Garajova S, Ropartz D, McGregor N, Brumer H, Rogniaux H, Berrin J-G. The Podospora anserina lytic polysaccharide monooxygenase PaLPMO9H catalyzes oxidative cleavage of diverse plant cell wall matrix glycans. Biotechnol Biofuels. 2017;10:63. https://doi.org/10.1186/s13068-017-0749-5.CrossRefPubMedPubMedCentralGoogle Scholar
- 14.Vaaje-Kolstad G, Bøhle LA, Gåseidnes S, Dalhus B, Bjørås M, Mathiesen G, Eijsink VGH. Characterization of the chitinolytic machinery of Enterococcus faecalis V583 and high-resolution structure of its oxidative CBM33 enzyme. J Mol Biol. 2012;416:239–54. https://doi.org/10.1016/j.jmb.2011.12.033.CrossRefPubMedGoogle Scholar
- 19.Sabbadin F, Hemsworth GR, Ciano L, Henrissat B, Dupree P, Tryfona T, et al. An ancient family of lytic polysaccharide monooxygenases with roles in arthropod development and biomass digestion. Nat Commun. 2018;9:756. https://doi.org/10.1038/s41467-018-03142-x.CrossRefPubMedPubMedCentralGoogle Scholar
- 23.Häkkinen M, Arvas M, Oja M, Aro N, Penttilä M, Saloheimo M, Pakula TM. Re-annotation of the CAZy genes of Trichoderma reesei and transcription in the presence of lignocellulosic substrates. Microb Cell Fact. 2012;11:134. https://doi.org/10.1186/1475-2859-11-134.CrossRefPubMedPubMedCentralGoogle Scholar
- 28.Di Cologna NDM, Gómez-Mendoza DP, Zanoelo FF, Giannesi GC, Guimarães NCDA, Moreira LRDS, et al. Exploring Trichoderma and Aspergillus secretomes: proteomics approaches for the identification of enzymes of biotechnological interest. Enzyme Microbial Technol. 2017. https://doi.org/10.1016/j.enzmictec.2017.08.007.CrossRefGoogle Scholar
- 30.Nekiunaite L, Arntzen MØ, Svensson B, Vaaje-Kolstad G, Abou Hachem M. Lytic polysaccharide monooxygenases and other oxidative enzymes are abundantly secreted by Aspergillus nidulans grown on different starches. Biotechnol Biofuels. 2016;9:187. https://doi.org/10.1186/s13068-016-0604-0.CrossRefPubMedPubMedCentralGoogle Scholar
- 31.Berrin J-G, Navarro D, Lopes-Ferreira N, Margeot A, Coutinho P, Henrissat B. Multi-enzymatic preparation containing the secretome of an Aspergillus japonicus strain (WO2014037925A1); 2015.Google Scholar
- 34.Abarca ML, Accensi F, Cano J, Cabañes FJ. Taxonomy and significance of black aspergilli. Antonie Van Leeuwenhoek. 2004;86:33–49. https://doi.org/10.1023/B:ANTO.0000024907.85688.05.CrossRefPubMedGoogle Scholar
- 40.Loose JSM, Arntzen MØ, Bissaro B, Ludwig R, Eijsink VGH, Vaaje-Kolstad G. Multipoint precision binding of substrate protects lytic polysaccharide monooxygenases from self-destructive off-pathway processes. Biochemistry. 2018;57:4114–24. https://doi.org/10.1021/acs.biochem.8b00484.CrossRefPubMedGoogle Scholar
- 42.Stadtman ER. Oxidation of free amino acids and amino acid residues in proteins by radiolysis and by metal-catalyzed reactions. Annu Rev Biochem. 1993;62:797–821. https://doi.org/10.1146/annurev.bi.62.070193.004053.CrossRefPubMedGoogle Scholar
- 43.Urresti S, Cartmell A, Liu F, Walton PH, Davies GJ. Structural studies of the unusual metal-ion site of the GH124 endoglucanase from Ruminiclostridium thermocellum. Acta Crystallogr F Struct Biol Commun. 2018;74:496–505. https://doi.org/10.1107/S2053230X18006842.CrossRefPubMedPubMedCentralGoogle Scholar
- 45.Selig MJ, Vuong TV, Gudmundsson M, Forsberg Z, Westereng B, Felby C, Master ER. Modified cellobiohydrolase–cellulose interactions following treatment with lytic polysaccharide monooxygenase CelS2 (ScLPMO10C) observed by QCM-D. Cellulose. 2015;22:2263–70. https://doi.org/10.1007/s10570-015-0635-x.CrossRefGoogle Scholar
- 46.Song B, Li B, Wang X, Shen W, Park S, Collings C, et al. Real-time imaging reveals that lytic polysaccharide monooxygenase promotes cellulase activity by increasing cellulose accessibility. Biotechnol Biofuels. 2018;11:41. https://doi.org/10.1186/s13068-018-1023-1.CrossRefPubMedPubMedCentralGoogle Scholar
- 48.Eibinger M, Ganner T, Bubner P, Rošker S, Kracher D, Haltrich D, et al. Cellulose surface degradation by a lytic polysaccharide monooxygenase and its effect on cellulase hydrolytic efficiency. J Biol Chem. 2014;289:35929–38. https://doi.org/10.1074/jbc.M114.602227.CrossRefPubMedPubMedCentralGoogle Scholar
- 54.Gascuel O. BIONJ: an improved version of the NJ algorithm based on a simple model of sequence data. Mol Biol Evol. 1997;14:685–95. https://doi.org/10.1093/oxfordjournals.molbev.a025808.CrossRefPubMedGoogle Scholar
- 57.Couturier M, Haon M, Coutinho PM, Henrissat B, Lesage-Meessen L, Berrin J-G. Podospora anserina hemicellulases potentiate the Trichoderma reesei secretome for saccharification of lignocellulosic biomass. Appl Environ Microbiol. 2011;77:237–46. https://doi.org/10.1128/AEM.01761-10.CrossRefPubMedGoogle Scholar
- 59.Wood TM. Preparation of crystalline, amorphous, and dyed cellulase substrates. In: Methods in enzymology. Academic Press; 1988. p. 19–25. https://doi.org/10.1016/0076-6879(88)60103-0.
- 60.Westereng B, Agger JW, Horn SJ, Vaaje-Kolstad G, Aachmann FL, Stenstrøm YH, Eijsink VGH. Efficient separation of oxidized cello-oligosaccharides generated by cellulose degrading lytic polysaccharide monooxygenases. J Chromatogr A. 2013;1271:144–52. https://doi.org/10.1016/j.chroma.2012.11.048.CrossRefPubMedGoogle Scholar
Open AccessThis article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.