Platelet-membrane-biomimetic nanoparticles for targeted antitumor drug delivery
Nanoscale drug-delivery systems (DDSs) have great promise in tumor diagnosis and treatment. Platelet membrane (PLTM) biomimetic DDSs are expected to enhance retention in vivo and escape uptake by macrophages, as well as minimizing immunogenicity, attributing to the CD47 protein in PLTM sends “don’t eat me” signals to macrophages. In addition, P-selectin is overexpressed on the PLTM, which would allow a PLTM-biomimetic DDS to specifically bind to the CD44 receptors upregulated on the surface of cancer cells.
In this study, porous nanoparticles loaded with the anti-cancer drug bufalin (Bu) were prepared from a chitosan oligosaccharide (CS)-poly(lactic-co-glycolic acid) (PLGA) copolymer. These were subsequently coated with platelet membrane (PLTM) to form PLTM-CS-pPLGA/Bu NPs. The PLTM-CS-pPLGA/Bu NPs bear a particle size of ~ 192 nm, and present the same surface proteins as the PLTM. Confocal microscopy and flow cytometry results revealed a greater uptake of PLTM-CS-pPLGA/Bu NPs than uncoated CS-pPLGA/Bu NPs, as a result of the targeted binding of P-selectin on the surface of the PLTM to the CD44 receptors of H22 hepatoma cells. In vivo biodistribution studies in H22-tumor carrying mice revealed that the PLTM-CS-pPLGA NPs accumulated in the tumor, because of a combination of active targeting effect and the EPR effect. The PLTM-CS-pPLGA/Bu NPs led to more effective tumor growth inhibition over other bufalin formulations.
Platelet membrane biomimetic nanoparticles played a promising targeted treatment of cancer with low side effect.
KeywordsPlatelet membrane Biomimetic Bufalin Nanoparticles Targeted anti-tumor drug delivery
vitamin E polyethylene glycol succinate
Nanoscale drug-delivery systems (DDSs) including inorganic nanoparticles [1, 2], liposomes [3, 4], hydrogels [5, 6, 7], and polymeric nanoparticles [8, 9] (among others) have great promise in tumor diagnosis and treatment. There are often problems with biocompatibility and short systemic circulation times when using these however, and much recent work has focused on using surface modifiers such as poly(ethylene glycol) (PEG) and proteins to ameliorate these issues [10, 11, 12]. Unfortunately, such PEG or protein modification can also impede the uptake of a DDS by cancer cells [13, 14]. Moreover, simple surface functionalization approaches are unable to precisely mimic the complex interfaces present in nature, and ultimately cannot completely vitiate recognition as a foreign body and the subsequent immune response [15, 16].
To overcome this hurdle to clinical translation, cell membrane cloaking has recently attracted significant attention as a route to endow nanoparticles with enhanced biocompatibility, low immunogenicity and active targeting abilities [17, 18]. Gao et al.  designed a set of nanoparticles (NPs) by encapsulating perfluorocarbon within the biocompatible polymer poly(lactic-co-glycolic acid) (PLGA), followed by coating with a red blood cell membrane (RBCM). These NPs were able to prolong the circulation time in the blood compared to uncoated particles, as well providing efficient intratumor penetration. The latter was attributed to the CD47 protein on the RBCM regulating phagocytic uptake by macrophages through interactions with SIRPα. In other work, Martinez et al.  designed leukocyte-based biomimetic nanoparticles as a novel theranostic platform for inflammatory diseases, and demonstrated that their materials have the ability to target the activated vasculature and exhibit superior accumulation in tumors and vascular lesions.
Platelets are components of the blood which exist to help prevent bleeding after blood vessel injuries. They avoid phagocytic uptake by macrophages, target and adhere to injured parts of the vasculature, and display enhanced binding to platelet-adhering pathogens . Platelet membrane (PLTM) biomimetic DDSs thus are expected to enhance retention in vivo and escape uptake by macrophages, as well as minimizing immunogenicity as a result of the CD47 membrane protein sending “don’t eat me” signals to macrophages [21, 22]. In addition, P-selectin is overexpressed on the PLTM, which would allow a PLTM-biomimetic DDS to specifically bind to the CD44 receptors upregulated on the surface of cancer cells .
Materials and methods
PLGA (lactide:glycolide 50:50, Mw ~ 21,000) was purchased from Jinan Daigang Biomaterials Co., Ltd. Chitosan oligosaccharide (pharmaceutical grade, Mw ~ 1200) was procured from Shanghai Xinxi Bio-Tech Co., Ltd, and bufalin from the Baoji Herbest Bio-Tech Co., Ltd. N-hydroxysuccinimide (NHS), 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide hydrochloride (EDC·HCl), dicyclohexylcarbodiimide (DCC), fluoresceinisothiocyanate (FITC), Hoechst 33342, and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazoliumbromide (MTT) were acquired from Sigma-Aldrich. Vitamin E TPGS and cyanine-5,5–carboxylic acid (Cy5.5–COOH, purity 99%) were obtained from J&K Scientific Ltd. H22 cells (a mouse hepatocellular carcinoma cell line) and RAW 264.7 (macrophage-like) cells were sourced from the Institute of Biochemistry and Cell Biology of the Chinese Academy of Sciences. A membrane protein extraction kit and protease inhibitor were procured from Phygene Life Sciences Co., Ltd. A Pierce BCA protein assay kit was procured from Life Technologies Co., Ltd. Mouse P-selectin protein (purity > 95%) was obtained from R&D Systems. Mouse anti-human CD41, mouse anti-human CD47, P-selectin antibody, DMEM medium, fetal bovine serum (FBS), phosphate buffered saline (PBS), penicillin and streptomycin were purchased from the Shanghai Bionove-gene Biomedical Technology Co., Ltd. All other chemicals were reagent grade and used as received.
Synthesis of CS-PLGA copolymer
The CS conjugated PLGA copolymer was synthesized by an EDC coupling method. Briefly, PLGA (105 mg, 5 μmol) was dissolved in 10.0 mL of dimethyl formamide (DMF) and preactivated using EDC·HCl (2.9 mg, 15 μmol) and NHS (1.7 mg, 15 μmol) for 0.5 h in an ice bath. The temperature was allowed to rise to room temperature, after which 9 mg (7.5 μmol) of water-soluble CS was added and the reaction incubated under stirring for 48 h at room temperature, under an N2 stream. Any residual reactive agents and byproducts were removed by dialysis (MWCO 7000 Da) against deionized water for 2 days. The final product was collected after lyophilization, followed by 1H NMR analysis with a Bruker Advance 400 MHz spectrometer.
Preparation and characterization of CS-pPLGA/Bu NPs
Bufalin-loaded non-porous CS-PLGA nanoparticles (CS-PLGA/Bu NPs) were prepared using the same method as above, except that TPGS was not added. Similarly, CS-pPLGA NPs without bufalin were generated following the same protocol but with no bufalin included in the preparation process. All the NP samples were stored at 4 °C until further use. For surface area and pore size measurements, a dry CS-pPLGA NPs powder were prepared after freeze drying. Measurements were performed on an automated area and pore size analyzer (Quantachrome, Autosorb-iQ).
Preparation of PLTM
PLTM was obtained according to the manufacture’s instruction. The anti-coagulated whole blood of mice was added to centrifuge tubes above a separating medium layer (mice peripheral blood platelet separation medium, Tianjin Haoyang Bio-Tech Co., Ltd). The samples were centrifuged at 250–300 g for 15 min at room temperature. The supernatant comprised a platelet rich plasma (PRP). The PRP was diluted with an equal volume of sample diluent, followed by centrifuging at 500 g for 20 min. Platelets were obtained after washing the precipitate with phosphate buffered saline (PBS) buffer three times, and then resuspended in PBS containing 1 mM EDTA and 2 mM of protease inhibitor. The morphology of the platelets was assessed using an optical microscope (Nikon Eclipse E400). The platelet membrane was subsequently obtained by a freeze–thaw process assisted by sonication . Platelet suspensions were frozen at − 80 °C before being thawed to room temperature; this process was repeated three times. Next, centrifugation at 4000 g for 3 min was employed to isolate the platelet membranes. The pellets were suspended in PBS buffer containing 2 mM of protease inhibitor and sonicated for 5 min at 40 kHz and a power of 100 W, resulting in a suspension of platelet membrane fragments.
Preparation and characterization of PLTM biomimetic CS-pPLGA/Bu NPs
To coat PLTM onto CS-pPLGA/Bu NPs, 2 mL PBS containing 4 mg nanoparticles was mixed with PLTM fragments derived from 5 mL of whole blood. The mixture underwent sonication at 40 kHz and a power of 100 W for 5 min, followed by being extruded repeatedly (11 times) through a 200 nm porous membrane using a mini extruder (LiposoFast-Basic, Avanti). This resulted in PLTM-CS-pPLGA/Bu NPs. Zeta potential and particle size were measured at a concentration of 2 mg/mL by DLS (BI-200SM, Brookhaven Instruments), and the morphology was characterized using a transmission electron microscope (TEM; JEOL 2010F instrument). The size distribution of the CS-pPLGA/Bu NPs and PLTM-CS-pPLGA/Bu NPs was calculated from the analysis of around 100 nanoparticles in TEM images, using the Image J software. Blank PLTM-CS-pPLGA NPs were similarly prepared from the drug-free CS-pPLGA NPs.
Western blotting was used to examine the platelet membrane proteins, following a reported procedure with some modifications . Briefly, CS-pPLGA/Bu NPs and PLTM-CS-pPLGA/Bu NPs were normalized to equivalent overall protein concentrations using a Pierce BCA protein assay kit. The membrane proteins were extracted using a specific membrane protein extraction kit. 60 μL of the resultant buffered solution was used for sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) on a 10% SDS-PAGE gel at 100 V, the proteins were then transferred using a semi-dry transfer method to a polyvinylidene difluoride (PVDF) membrane, followed by bathing in 5% skimmed milk (20 mL) for 2 h. Key platelet membrane proteins were identified using mouse anti-human CD41, mouse anti-human CD47, and P-selectin antibodies. The membranes were stored overnight at 4 °C and then washed with 50 mL of PBS containing 0.05% v/v Tween 20 before the addition of goat anti-rat HRP-conjugated secondary antibodies and incubation for another 2 h at room temperature. The membranes were combined with 1 mL of the ECL luminescent reagent followed by scanning (Epson Perfection V370 Photo, Seiko Epson Corporation) and imaging within the ImageJ software (National Institutes of Health) to quantify the amount of proteins present.
In vitro drug release
The drug release profiles of CS-PLGA/Bu, CS-pPLGA/Bu and PLTM-CS-pPLGA/Bu NPs were evaluated by resuspending the NPs in PBS, and employing a dialysis method. 2 mL of a CS-pPLGA/Bu, CS-pPLGA/Bu or PLTM-CS-pPLGA/Bu NP water suspension (2 mg/mL) was loaded into a dialysis bag (MWCO = 7000 Da) and immersed in 18 mL of a release buffer (PBS containing 0.1% w/v Tween 80, pH 5.5 or 7.4). All experiments were performed at 37 °C with shaking (120 rpm) for 48 h. At predetermined time points, 1 mL of the external medium was collected and replaced with an equal volume of fresh pre-heated medium. The concentration of bufalin in the release medium was quantified by UV spectroscopy at 298 nm. Data are reported as mean ± standard deviation (SD), n = 3.
The in vitro cytotoxicity of blank PLTM-CS-pPLGA NPs was studied to evaluate their cytocompatibility. H22 cells were maintained in DMEM medium supplemented with 1% penicillin, 1% streptomycin, and 10% v/v fetal bovine serum. The cells were cultured as a monolayer at 37 °C in a humidified atmosphere containing 5% CO2. For viability experiments, 200 μL of H22 cells were seeded into each well of 96-well plates at a density of 8 × 103 cells/well. After overnight incubation at 37 °C in a humidified 5% CO2 environment, the medium was removed and 200 μL of fresh medium containing different concentrations of blank PLTM-CS-pPLGA NPs (1, 10, 25, 50, 100, 250 and 500 μg/mL) was added. After incubation for another 24 h, 20 μL of MTT solution (10 μg/mL) was added to the wells, and the plates incubated for an additional 4 h. After this, the medium was carefully removed, 200 μL of DMSO added to each well to dissolve the MTT-formazan generated by live cells, and the plate thoroughly shaken for 15 min. The absorbance of the wells was finally measured at 570 nm, using a microplate reader (Multiskan FC, Thermo Scientific).
The anticancer efficacy of the drug-loaded formulations was investigated following a similar protocol as described above, except that media containing free bufalin, CS-pPLGA/Bu NPs and PLTM-CS-pPLGA/Bu NPs (concentration of bufalin: 0.1, 0.5, 1, 5, 10, 20 μg/mL) was added after the initial incubation. Data are reported as mean ± SD, with three independent experiments each containing three replicates having been performed.
Cellular uptake evaluation
In order to track the distribution of the PLTM-CS-pPLGA NPs visually in cells, we used FITC to label the CS-PLGA. Briefly, CS-PLGA (222 mg, 0.01 mmol) and FITC (19.5 mg, 0.05 mmol) were dissolved in 10 mL of dichloromethane, before being stirred for 12 h in the dark at 4 °C. The dichloromethane was removed by rotary evaporation, and 5 mL dimethyl formamide added to dissolve the product. This was followed by dialysis against 1 L of deionized water for 3 days (7000 Da Spectra/Por dialysis tube). Finally, the sample was freeze-dried for 48 h to obtain dry FITC labeled CS-PLGA. FITC labeled NPs (FITC-CS-pPLGA NPs and FITC-PLTM-CS-pPLGA NPs) were prepared using the same protocols as described above.
For cellular uptake evaluation, 200 µL of H22 cells or RAW 264.7 cells were seeded onto sterile coverslips placed in each well of a 24-well culture plate (5 × 104 cells per well). 800 µL of DMEM supplemented with 1% penicillin, 1% streptomycin, and 10% v/v fetal bovine serum was added to each well. After incubation for 24 h, the medium was aspirated and replaced by 450 μL of fresh medium. 50 μL of PBS suspensions of FITC-CS-pPLGA or FITC-PLTM-CS-pPLGA NPs (1 mg/mL) were added. Following a further incubation step for 2 h (37 °C; 5% CO2), the culture medium was removed and the cells rinsed three times with PBS. They were then fixed with 4% paraformaldehyde for 20 min at 4 °C, and washed with PBS three times. The cell nuclei were stained with 0.5 mL of Hoechst 33342 (10 μg/mL) for 15 min at 37 °C and washed three times with PBS. Finally, the cells were studied using a confocal laser-scanning microscope (CLSM, Carl Zeiss LSM 700) with an argon blue laser light at 488 nm and a magnification of 63×. Each experiment was conducted in triplicate, and representative images are shown. For the blocking experiments, H22 cells were pre-incubated with free P-selectin (20 μg/mL) for 1 h. After removing the free P-selectin, the cells were incubated with FITC-PLTM-CS-pPLGA NPs (1 mg/mL) for another 2 h. The cells were then treated and imaged as described above.
Flow cytometry was used to quantify NP uptake by H22 cells. 100 μL of H22 cells were cultured in six-well plates (1 × 106 cells/well) for 24 h. 200 μL of PBS containing FITC-CS-pPLGA or FITC-PLTM-CS-pPLGA NP (1 mg/mL) were added to each well. After incubation at 37 °C for 4 h, the cells were digested by 0.25% w/v trypsin and 0.03% w/v EDTA and centrifuged at 1000 rpm for 5 min. The supernatant culture medium was discarded, and the precipitate dispersed in 500 μL of PBS and incubated for 15 min in the dark. Finally, cellular uptake was determined by flow cytometry using a Becton–Dickinson FACScan analyzer (Frankin, CA). A blocking experiment was also performed to evaluate the active targeting effect mediated by selective blinding between P-selectin and the CD44 receptor. H22 cells were first pre-incubated with free P-selectin (20 μg/mL) for 1 h, after which the free P-selectin was removed and the cells incubated with FITC-PLTM-CS-pPLGA NPs (1 mg/mL) for another 4 h at 37 °C. Cellular uptake was then probed by flow cytometry as detailed above.
Tumor model mice
All animal experiments were undertaken following robust ethical review and in accordance with the procedures authorized by the Committee for Experimental Animal Welfare and Ethics of Yunnan University of Traditional Chinese Medicine. ICR female mice (specific pathogen-free grade, 18–20 g) were procured from Jiangsu KeyGENBioTECH Co. Ltd, and tumors implanted by subcutaneous injection of 1 × 106 H22 cells in 100 μL of PBS (pH = 7.2–7.4) into the right front limb armpit of each mouse. Tumor volume was calculated as width2 × length/2.
In vivo and ex vivo imaging
In vivo fluorescence imaging was performed using an IVIS Lumina LT imaging system (Caliper Life Sciences) to investigate the biodistribution of Cy5.5 labeled PLTM-CS-pPLGA NPs. The latter were prepared according to the literature , with some modifications. 6 mg of Cy5.5–COOH was dissolved in 1 mL DCM containing 2.2 mg DCC, and placed for 30 min in an ice bath. 6.5 mL of a DCM solution containing 320 mg CS-PLGA and 1.3 mg DMAP was then added into the above solution, and the two allowed to react under gentle stirring in the dark overnight. Next, the solvent was evaporated using a rotary evaporator. Unreacted Cy5.5–COOH was removed by washing with ice-cold methanol and recovery of the solid product by centrifugation at 5000 rpm. The washing process was repeated three times, resulting in Cy5.5-CS-PLGA. This was then processed into nanoparticles using the same procedures as described above.
200 μL of Cy5.5 labeled bufalin-free PLTM-CS-pPLGA NPs or Cy5.5 labeled CS-pPLGA NPs in PBS (2 mg/mL) were i.v. injected into each mouse when the tumor volume reached 200 mm3. Fluorescent imaging at various time intervals after the injection was performed using a 60 s exposure time, with excitation at 748 nm and emission at 780 nm. For ex vivo imaging, H22 tumor-bearing mice were sacrificed by cervical vertebra dislocation 6 h after i.v. injection with the Cy5.5 labeled NPs. The tumor and major organs were collected and imaged using the IVIS Lumina LT imaging system.
To further evaluate the targeted effect of PLTM biomimetic NPs to tumor through recognizing CD44 receptor on tumor cells, tumors from mice after treating PLTM coated or uncoated Cy5.5 labeled CS-pPLGA/Bu NPs for 24 h were sectioned into 100 μm sections under frozen conditions. The tumor tissues were fixated with paraformaldehyde, and then incubated with primary antibody (rat anti-mouse CD44, Servicebio) against CD44 at 4 °C overnight followed by the incubation with secondary antibody (goat anti-rat IgG, DyLight 488, Servicebio) at 37 °C for 50 min. The nuclei of the cells were stained with DAPI. The obtained slices were scanned by an imaging system (Nikon DS-U3).
In vivo antitumor efficacy
Mice bearing H22 tumors were treated after their tumors reached approximately 120 mm3 in size. The mice were randomly divided into four groups (5 mice per group) and given 200 μL of PBS, free bufalin, CS-pPLGA/Bu NPs, or PLTM-CS-pPLGA/Bu NPs (bufalin dose: 2 mg/kg) intravenously every 2 days. Tumor sizes and body weights were monitored and recorded every 2 days for 16 days, after which the experiment was halted. After this time, the mice were sacrificed by cervical vertebra dislocation. The tumors and major organs of each group were extracted. The tissues were fixed with 4% paraformaldehyde solution and embedded in paraffin. 4 mm slices were taken, mounted on glass slides, stained by hematoxylin and eosin (H&E), and imaged with a digital microscope (Nikon DS-U3 microscope). The tumors tissues were further stained with terminal deoxynucleotidyl transferase UTP nick end labeling (TUNEL) to study the extent of apoptosis in the tumors.
In order to exclude PLTM effects on tumor growth inhibition and evaluate the biosafety after the administration of PLTM-CS-pPLGA NPs, mice bearing H22 tumors (~ 120 mm3 in size) were randomly divided into two groups (5 mice per group) and given 200 μL of PBS or a suspension of the PLTM-CS-pPLGA NPs (at the same dose as the therapeutic group) intravenously every 2 days. Tumor sizes were monitored and recorded every 2 days for 16 days. On day 16, 0.5 mL of blood was withdrawn for blood biochemistry analysis. The blood samples were centrifuged at 3500 rpm for 15 min at 4 °C to obtain serum. The serum concentrations of alanine aminotransferase (ALT), aspartate aminotransferase (AST), creatinine (CREA) and urea nitrogen (BUN) were then analyzed using an automatic biochemistry analyzer (7600, Hitachi). The liver and kidney were removed for histological assessment by H&E staining.
Differences between two groups were analyzed by Student’s t test and mean values were compared via one-way ANOVA; The significance level was defined as P < 0.05, and the data were marked with (*) P < 0.05, (**) P < 0.005 and (***) P < 0.001.
Results and discussion
Synthesis and characterization of CS-PLGA
In order to construct nanoparticles with a positive surface charge for absorbing negative charged PLTM by L-B-L assembly, a water-soluble chitosan oligosaccharide was initially conjugated to PLGA. 1H-NMR spectra (Additional file 1: Figure S1) showed that a new resonance peaks at δ = 7.9(m) appeared after the conjugation. This can be ascribed to the amide bond (–CO–NH–). All other hydrogen signals from CS and PLGA are also visible in the CS-PLGA spectrum, demonstrating successful conjugation. Zeta potential data confirmed this. When the carrier phase pH was adjusted from 8.6 to 5.0, the zeta potential of CS-PLGA went from a negative to a positive value (Additional file 1: Figure S2), ascribed to the increased protonation of the CS segments under acidic conditions. In contrast, the zeta potential of CS and PLGA show much more modest changes in response to pH variation; CS has an increasingly negative zeta potential as the pH goes up, while PLGA becomes less positively charged.
Preparation of PLTM-coated biomimetic NPs
Platelets (PLTs) were successfully extracted from fresh whole blood (Additional file 1: Figure S4) by gradient centrifugation, and then subjected to repeated freeze–thaw process to obtain the empty platelets. After PLTM coating by sonicating and extruding the mixture of CS-pPLGA NPs and empty platelets, a cell-membrane structure can be clearly observed around the CS-pPLGA NPs, with an outer shell ≈ 15 nm in thickness (Fig. 1d), and the particles have a mean size of ~ 192 nm (Fig. 1e). FESEM images of PLTM-CS-pPLGA NPs (Fig. 1f) also demonstrate the nanoparticles to be wrapped by an external layer. The zeta potential of the nanoparticles after PLTM coating decreased to ~ − 28 mV (cf. ~ − 5 mV for CS-PLGA; Additional file 1: Figure S5); the PLTM-CS-pPLGA NPs thus possess the same surface charge as the PLTM, consistent with the existence of the latter on the surface of the NPs.
Platelet membrane proteins
The presence of key platelet membrane proteins, including the platelet-specific CD41, immunomodulatory CD47, and the cancer-targeted P-selectin on the nanoparticles was examined by Western blotting. It was observed that the PLTM-CS-pPLGA NPs have an exterior protein environment very similar to the platelet membrane source (Additional file 1: Figure S6).
Drug loading and release behavior
The results of encapsulation efficiency and loading content of the bufalin-loaded porous CS-pPLGA NPs are summarized in Additional file 1: Table S1. Although, the highest LC (11.5 ± 2.1%) was achieved when the mass ratio of Bu: CS-PLGA was 1:5, the EE was only 65.4 ± 4.2%, leading to wastage of bufalin. When the ratio reached to 1:20, the low LC (only 4.6 ± 1.3%) rendered the NPs non-viable for further exploitation. The 1:10 ratio offers a good balance between these two extremes, with an LC and EE of 8.5 ± 1.9% and 92.8 ± 3.5%, respectively.
Cellular uptake of nanoparticles
The CLSM results for RAW 264.7 cells treated with FITC-PLTM-CS-pPLGA NPs are rather different to those obtained with H22 cells (Additional file 1: Figure S7). The NPs are mainly located around the cell membranes, demonstrating that the biomimetic nanoparticles contained “self-recognized” proteins (CD47). These inherently mimic the surface properties of the host cells and thus can escape uptake by macrophages and send “don’t eat me” signals to the host .
A hemolysis assay was performed to evaluate the biocompatibility of PLTM-CS-pPLGA NPs with RBCs. Microscopic observations (Additional file 1: Figure S8) showed that no morphological changes and no significant lysis were observed after RBCs were treated with a high concentration of PLTM-CS-pPLGA NPs (500 μg/mL). The amount of hemoglobin released from RBCs into solution permits the degree of hemolysis to be quantified: spectroscopic results showed only ~ 3.85% RBC lysis (Additional file 1: Table S2). The results indicated that the PLTM-CS-pPLGA NPs are blood-compatible biomaterials according to the ISO/TR 7406 standard .
In vivo biodistribution in H22 tumor-bearing mice
In contrast, low fluorescence signals were observed at the tumor site for the uncoated Cy5.5 labeled CS-pPLGA NPs during whole treatment time (Additional file 1: Figure S9a). Ex vivo imaging results (Additional file 1: Figure S9b) showed weaker fluorescence signals in the tumor tissue, but stronger fluorescence in the liver and kidney. Quantitative ROI analysis result (Additional file 1: Figure S9c) showed the fluorescence intensity in the liver and kidney were 6.2-fold and 3.2-fold higher than that in tumor respectively. Collectively, these in vivo findings confirm that the nanoparticles coated with the PLTM could inhibit uptake by the reticuloendothelial system and achieve active targeting to the tumor.
In vivo antitumor efficacy
Off-target toxicity is always a concern with cancer therapies. Histological analyses of major organs post-sacrifice were thus conducted (Additional file 1: Figure S10). The images obtained from untreated mice and the PLTM-CS-pPLGA/Bu NPs are very similar, and hence it is clear that the NPs do not cause any significant systemic toxicity.
Biosafety in vivo
To investigate the feasibility of the PLTM biomimetic CS-pPLGA NPs for clinical translation, we further evaluated the biosafety in vivo. H22-tumor bearing ICR mice were i.v. injected with PBS or PLTM-CS-pPLGA NPs. No death or discomfort was observed during the experiment. The mice treated with PLTM-CS-pPLGA NPs showed no significant tumor volume difference compared to the control group (Additional file 1: Figure S11a), indicating that the PLTM biomimetic NPs can’t cause tumor growth inhibition. Histology analysis of the liver and kidney (Additional file 1: Figure S11b) showed no inflammation or lesions. The sections from NP-treated mice are very similar to the negative control group, indicating that the NPs do not cause systemic toxicity.
As shown in Additional file 1: Figure S11c and 11d, hepatic function markers (ALT and AST) and renal function markers (CREA and BUN) were determined to be normal and again very similar to the control group, suggesting no obvious hepatic or kidney disorders were induced by the PLTM-CS-pPLGA NPs in vivo. Collectively, these results demonstrated that the repeated administration of the PLTM cloaked NPs has a low risk of off-target toxicity.
Compared to other PLGA-based nanoscale delivery systems, the PLTM-modified materials prepared in this work have a number of advantages. For example, Xu et al.  aimed to improve the biocompatibility of PLGA by modifying it with poly(ethylene glycol) (PEG); they prepared a monomethoxy poly(ethylene glycol)-b-PLGA-b-poly(l-glutamic acid) (mPEG-PLGA-PGlu) nanoparticles. Although the PEG segment improved the formulation’s biocompatibility, the synthetic procedure was complicated and did not allow for any active targeting. Other biomimetic delivery systems, for example red blood cell membrane (RBCM) cloaked nanoparticles , have excellent biocompatibility, low immunogenicity and prolonged circulation times in vivo and have been suggested to have enhanced anti-tumor efficacy. However, the lack of active targeting to tumor cells by the RBCM limits its use for preparing biomimetic cancer therapeutics. The use of the PLTM overcomes this issue, and provides enhanced efficacy through specific binding of P-selectin to the CD44 receptors overexpressed on the surface of H22 cells.
In this study, we developed platelet membrane (PLTM)-functionalized porous nanoparticles (NPs) which permit active-targeting mediated delivery of bufalin to tumor sites. These nanoparticles comprised a PLGA-chitosan conjugate, and were able to achieve a bufalin loading of ~ 8.5%. The PLTM coating led to particles providing pH-dependent sustained drug release over 2 days. The carrier was found to be biocompatible with H22 cells, while the drug-loaded analogue could effectively kill cancer cells in vitro. A high level of uptake of PLTM-coated NPs by cancer cells was observed by confocal microscopy and flow cytometry analysis. In vivo imaging showed accumulation of the NPs in the tumor site, demonstrating their active targeting ability as a result of targeted binding of P-selectin to the CD44 receptors overexpressed on the surface of H22 cells. The PLTM-coated NPs were also found to be effective in reducing tumor growth in vivo, and did not cause off-target effects on the major organs. Therefore, the novel PLTM biomimetic formulations reported in this work have significant potential as anti-cancer drug carriers. Furthermore, platelets have the ability to selective adhere to injured blood vessels , so the PLTM-coated material could also be used to deliver vascular disrupting agents or combined with photothermal therapy  to damage tumor blood vessels, and thus achieve enhanced anti-tumor activity.
This investigation was supported by grant 16410723700 from the Science and Technology Commission of Shanghai Municipality, the Biomedical Textile Materials “111 Project” of the Ministry of Education of China (No. B07024), and the UK-China Joint Laboratory for Therapeutic Textiles (based at Donghua University).
HJW prepared and characterized the PLTM-CS-pPLGA NPs, HJW and GRW analysed the data and drafted the manuscript. HJW, JZW and QF performed the in vitro and in vivo experiments. TTX, SWN and JRW assisted with the functionalization of the nanocomposite. LMZ designed the experiment and wrote the respective procedures and results related to it in the manuscript. All authors read and approved the final manuscript.
Ethics approval and consent to participate
All animal experiments were undertaken following robust ethical review and in accordance with the procedures authorized by the Committee for Experimental Animal Welfare and Ethics of Yunnan University of Traditional Chinese Medicine.
The authors declare that they have no competing interests.
- 3.Rizzitelli S, Giustetto P, Faletto D, Delli Castelli D, Aime S, Terreno E. The release of doxorubicin from liposomes monitored by MRI and triggered by a combination of US stimuli led to a complete tumor regression in a breast cancer mouse model. J Control Release. 2016;230:57–63.CrossRefGoogle Scholar
- 20.Martinez JO, Molinaro R, Hartman KA, Boada C, Sukhovershin R, De Rosa E, Kirui D, Zhang S, Evangelopoulos M, Carter AM, et al. Biomimetic nanoparticles with enhanced affinity towards activated endothelium as versatile tools for theranostic drug delivery. Theranostics. 2018;8:1131–45.CrossRefGoogle Scholar
- 37.Song Y, Huang Z, Liu X, Pang Z, Chen J, Yang H, Zhang N, Cao Z, Liu M, Cao J, et al. Platelet membrane-coated nanoparticle-mediated targeting delivery of rapamycin blocks atherosclerotic plaque development and stabilizes plaque in apolipoprotein E-deficient (ApoE(−/−)) mice. Nanomedicine. 2018;15:13–24.CrossRefGoogle Scholar
Open AccessThis article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.