Towards creating an extended metabolic model (EMM) for E. coli using enzyme promiscuity prediction and metabolomics data
Metabolic models are indispensable in guiding cellular engineering and in advancing our understanding of systems biology. As not all enzymatic activities are fully known and/or annotated, metabolic models remain incomplete, resulting in suboptimal computational analysis and leading to unexpected experimental results. We posit that one major source of unaccounted metabolism is promiscuous enzymatic activity. It is now well-accepted that most, if not all, enzymes are promiscuous—i.e., they transform substrates other than their primary substrate. However, there have been no systematic analyses of genome-scale metabolic models to predict putative reactions and/or metabolites that arise from enzyme promiscuity.
Our workflow utilizes PROXIMAL—a tool that uses reactant–product transformation patterns from the KEGG database—to predict putative structural modifications due to promiscuous enzymes. Using iML1515 as a model system, we first utilized a computational workflow, referred to as Extended Metabolite Model Annotation (EMMA), to predict promiscuous reactions catalyzed, and metabolites produced, by natively encoded enzymes in Escherichia coli. We predict hundreds of new metabolites that can be used to augment iML1515. We then validated our method by comparing predicted metabolites with the Escherichia coli Metabolome Database (ECMDB).
We utilized EMMA to augment the iML1515 metabolic model to more fully reflect cellular metabolic activity. This workflow uses enzyme promiscuity as basis to predict hundreds of reactions and metabolites that may exist in E. coli but may have not been documented in iML1515 or other databases. We provide detailed analysis of 23 predicted reactions and 16 associated metabolites. Interestingly, nine of these metabolites, which are in ECMDB, have not previously been documented in any other E. coli databases. Four of the predicted reactions provide putative transformations parallel to those already in iML1515. We suggest adding predicted metabolites and reactions to iML1515 to create an extended metabolic model (EMM) for E. coli.
KeywordsMetabolic engineering Enzyme promiscuity Extended metabolic model Systems biology Enzyme activity prediction
The engineering of metabolic networks has enabled the production of high-volume commodity chemicals such as biopolymers and fuels, therapeutics, and specialty products [1, 2, 3, 4, 5]. Producing such compounds requires transforming microorganisms into efficient cellular factories [6, 7, 8, 9]. Biological engineering has been aided via computational tools for constructing synthesis pathways, strain optimization, elementary flux mode analysis, discovery of hierarchical networked modules that elucidate function and cellular organization, and many others (e.g. [10, 11, 12, 13, 14]). These design tools rely on organism-specific metabolic models that represent cellular reactions and their substrates and products. Model reconstruction tools [15, 16] use homology search to assign function to Open Reading Frames obtained through sequencing and annotation. Once the function is identified, the corresponding biochemical transformation is assigned to the gene. Additional biological information such as gene–protein-reaction associations is utilized to refine the models. Exponential growth in sequencing has resulted in an “astronomical”, or better yet, “genomical”, number of sequenced organisms . There are now databases (e.g. KEGG , BioCyc , and BiGG ) that catalogue organism-specific metabolic models. Despite progress in sequencing and model reconstruction, the complete characterizing of cellular activity remains elusive, and metabolic models remain incomplete. One major source of uncatalogued cellular activity is attributed to orphan genes. Because of limitations of homology-based prediction of protein function, there are millions of protein sequences that are not assigned reliable functions . Integrated strategies that utilize structural biology, computational biology, and molecular enzymology continue to address assigning function to orphan genes .
We focus in this paper on another major source of uncatalogued cellular activity–promiscuous enzymatic activity, which has recently been referred to as ‘underground metabolism’ [23, 24, 25]. While enzymes have widely been held as highly-specific catalysts that only transform their annotated substrate to product, recent studies show that enzymatic promiscuity—enzymes catalyzing reactions other than their main reactions—is not an exception but can be a secondary task for enzymes [26, 27, 28, 29, 30, 31]. More than two-fifths (44%) of KEGG enzymes are associated with more than one reaction . Promiscuous activities however are not easily detectable in vivo since, (i) metabolites produced due to enzyme promiscuity may be unknown, (ii) product concentration due to promiscuous activity may be low, (iii) there is no high-throughput way to relate formed products to specific enzymes, and (iv) it is difficult to identify potentially unknown metabolites in complex biological samples. Outside of in vitro biochemical characterization studies to predict promiscuous activities, there are few resources that record details about promiscuous enzymes such as MINEs Database , and ATLAS . Despite the current wide-spread acceptance of enzyme promiscuity, and its prominent utilization to engineer catalyzing enzymes in metabolic engineering practice [35, 36, 37, 38], promiscuous enzymatic activity is not currently fully documented in metabolic models. Advances in computing and the ability to collect large sets of metabolomics data through untargeted metabolomics provide an exciting opportunity to develop methods to identify promiscuous reactions, their catalyzing enzymes, and their products that are specific to the sample under study. The identified reactions can then be used to complete existing metabolic models.
We describe in this paper a computational workflow that aims to extend preexisting models with reactions catalyzed by promiscuous native enzymes and validate the outcomes using published metabolomics datasets. We refer to the augmented models as extended metabolic models (EMMs), and to the workflow to create them as EMMA (EMM annotation). Each metabolic model is assumed to have a set of reactions and their compounds and KEGG reaction IDs. Each reaction, and thus transformation, is assumed to be reversible unless indicated otherwise. EMMA utilizes PROXIMAL , a method for creating biotransformation operators from KEGG reactions IDs using RDM (Reaction Center, Difference Region, and Matched Region) patterns , and then applying the operators to given molecules. While initially developed to investigate products of Cytochrome P450 (CYP) enzymes, highly promiscuous enzymes utilized for detoxification, the PROXIMAL method is generic. To create an EMM for a known metabolic model, PROXIMAL generates biotransformation operators for each reaction in the model and then applies the operators to known metabolites within the model. The outcome of our workflow is a list of putative metabolites due to promiscuous enzymatic activity and their catalyzing enzymes and reactions. In this work, we apply EMMA to iML1515, a genome-scale model of Escherichia coli MG1655 . EMMA predicts hundreds of putative reactions and their products due to promiscuous activities in E. coli. The putative products are then compared to measured metabolites as reported in Escherichia coli Metabolome Database, ECMDB [42, 43]. We identify 23 new reactions and 16 new metabolites that we recommend adding to the E. coli model iML1515. Four of these reactions have not been catalogued prior for E. coli or other organisms, suggesting novel undocumented promiscuous transformations, while five other reactions are catalogued for species other than E. coli. Further, there were ten reactions that were cataloged in other E. coli databases (e.g. EcoCyc , and KEGG), but not in iML1515. These 19 reactions led to the addition of the 16 metabolites that are new to iML1515. Additionally, there were four new reactions that present putative transformation routes that are in parallel to existing reactions in E. coli. No new metabolites are added due to these four reactions.
The application of PROXIMAL to iML1515 yielded a lookup table with 1875 biotransformation operator entries. The operators were applied on two sets of metabolites. One set consisted of 106 iML1515 metabolites with predicted or measured concentration values above 1 µM . We focused on these metabolites as the assumption is that high concentration metabolites are more likely to undergo transformation by promiscuous enzymatic activity and form detectible derivatives. When applied to this set, the operators predicted the formation of 1423 known (with PubChem IDs) metabolites of which 57 were identified to exist in E. coli per ECMDB. After manual curation (per Step 1 in the “Methods” section), our workflow recommended 16 new metabolites and 23 reactions that can be used to augment the iML1515 model. The second set of metabolites consisted of the non-high concentration metabolites in iML1515. Our workflow predicted the formation of 3694 known (with PubChem IDs) metabolites. Out of the predicted metabolites of the second set 210 derivatives are found in ECMDB. We provide a listing of all derivatives in Additional file 1. For the remainder of the “Results” section, we focus on detailed analysis of derivative products due to high-concentration metabolites. Results of flux balance analysis and flux variability analysis for the added EMMA reactions are reported in Additional file 2.
If a predicted metabolite is not one of the known metabolites in iML1515, the decision tree determines whether the predicted metabolite and reaction are associated with E. coli in other databases (KEGG and EcoCyc). If the biotransformation is present in KEGG or EcoCyc, then the predicted metabolite is classified into Category 2 (C2), reflecting a curation issue where some reactions were not included in the iML1515 model. If the predicted metabolite is not in iML1515 and not associated with E. coli in KEGG nor listed in EcoCyc, then the decision tree determines if the same chemical transformation (same substrate and same product) is documented to occur in other organisms. Predicted biotransformations documented in KEGG for organisms other than E. coli are classified in Category 3 (C3). While biotransformations not found in KEGG are classified as Category 4 (C4).
List of C1 reactions predicted by EMMA and their parallel reactions in E. coli iML1515
EC number (gene)
Cytosine + 5-phospho-α-d-ribose-1-diphosphate ⇋ CMP + diphosphate
Cytosine + d-ribose-5-phosphate ⇋ CMP + H2O
2-Oxoglutarate + NADPH + H+ ⇋ 2-hydroxyglutarate + NADP+
2-Oxoglutarate + NADH + H+ ⇋ 2-hydroxyglutarate + NAD+
22.214.171.124 (b0032 or b0033)
Bicarbonate + orthophosphate ⇋ carboxyphosphate + H2O
Bicarbonate + ATP ⇋ carboxyphosphate + ADP
126.96.36.199 (b2221 and b2222 or b1694) or 188.8.131.52 (b2221 and b2222)
Acetoacetyl-CoA + citrate ⇋ acetoacetate + (3S)-citryl-CoA
Acetoacetyl-CoA + acetate ⇋ acetoacetate + acetyl-CoA
C2 consists of 10 reactions known to be in E. coli but missing from the iML1515 model. The first predicted reaction is the aminoacyltransferase reaction between l-glutamate and γ-glutamyl-β-cyanoalanine due to EC 184.108.40.206 (γ-glutamyltransferase) (Fig. 3a). The second is a predicted ligase reaction between l-glutamic acid and THF to form/consume THF-l-glutamic acid by EC 220.127.116.11 (tetrahydrofolate synthase) (Fig. 3b). The third is an acyltransferase transformation between propanoyl-CoA and 2-methylacetoacetyl-CoA catalyzed by EC 18.104.22.168 (acetoacetyl-CoA thiolase) (Fig. 3c). Fourth, PROXIMAL predicted the phosphotransferase reaction between of d-ribulose-5-phosphate and d-ribulose-1,5-bisphosphate by EC 22.214.171.124 (phosphoribulokinase) (Fig. 3d). The fifth predicted reaction known to be in E. coli is the redox transformation of d-gluconic acid to 2-keto-d-gluconic acid by EC 126.96.36.199 (gluconate 2-dehydrogenase) (Fig. 3e). The workflow also predicted glycosyltransferase transformation of 5-amino-4-imidazolecarboxamide to/from 1-(5′-phosphoribosyl)-5-amino-4-imidazolecarboxamide by EC 188.8.131.52 (AMP pyrophosphorylase) (Fig. 3f). The seventh predicted reaction is the transformation between pyruvate and 4-hydroxy-2-oxoglutarate by EC 184.108.40.206 (Fig. 3g). The eighth reaction is catalyzed by EC 220.127.116.11 to transform guanine to/from GMP (Fig. 3h). Also, PROXIMAL predicted the transformation between glycerate and tartrate by EC 18.104.22.168 (Fig. 3i). Lastly, bicarbonate is transformed to/from carboxyphosphate by EC 22.214.171.124 (Fig. 3j).
Current practices for reconstructing genome-scale metabolic models, which are derived using sequencing and functional annotation, can be improved by utilizing metabolomics data. However, directly utilizing metabolomics measurements to augment existing models is challenging. Not every metabolite is measurable due to limited resolution and fidelity of mass spectrometry instruments. Further, assigning chemical identities to measured metabolites remains a challenge. Even if new metabolites are identified, their formation cannot be easily assigned to enzymes without significant experimental effort involving either genetic or biochemical screens. Additionally, metabolomics data alone cannot differentiate reactions catalyzed by different enzymes yet between the same substrates–product pairs without additional experimental efforts. Computational tools and workflows, as presented in this paper, can significantly guide such studies and aid in metabolic model construction and augmentation based on metabolomics data.
The workflow we developed here is designed to identify metabolites that can form due to promiscuous enzymatic activity within a specific model organism. Further, the workflow provides balanced reactions to document such enzymatic activities. We utilized PROXIMAL , which first identifies patterns of structural transformations associated with enzymes in the biological sample and then applies these transformations to known sample metabolites to predict putative metabolic products. Using PROXIMAL in this way allows attributing putative metabolic products to specific enzymatic activity and deriving balanced biochemical reactions that capture the promiscuous activity. Using PROXIMAL offers an additional advantage—the derived promiscuous transformations are specific to the sample under study and are not limited to hand-curated biotransformation operators as in prior works [33, 34]. PROXIMAL therefore allows exploration of a variety of biotransformations that are commensurate with the biochemical diversity of the biological sample. The EMMA workflow, which utilized PROXIMAL, was previously developed to engineer a candidate set from a metabolic model for metabolite identification . EMMA did not aim to augment existing metabolic models or derive balanced reactions as utilized in this study.
Future experimental and computational efforts can further advance this work. Experimentally, the list of putative products generated by PROXIMAL but not documented in any metabolomics databases can be used as a resource to identify as yet unidentified metabolites. Experimental validation of reactions in the C1, C3 and C4 categories would provide further evidence of the suggested reactions, and would provide a means for expanding existing databases such as KEGG and EcoCyc. Computationally, PROXIMAL can be upgraded to consider enzymes that act on more than one Reaction Center (R) within a metabolite (e.g. transketolase). This would produce multiple operators per reaction and generate a more comprehensive list of putative reactions and products. When applying PROXIMAL, we did not consider whether products of promiscuous reactions can themselves act as new substrates for promiscuous reactions. This is due to the large number of putative products. We are currently developing machine learning techniques to improve the prediction accuracy of PROXIMAL.
This study investigates creating extended metabolic models (EMMs) through the augmentation of existing metabolic models with reactions due to promiscuous enzymatic activity. Our workflow, EMMA, first utilizes PROXIMAL to predict putative metabolic products, and then compares these products against metabolomics data. EMMA was applied to iML1515, the genome-scale model of E. coli MG1655. PROXIMAL generated 1875 biochemical operators based on reactions in iML1515 and predicted 1423 derivatives of 106 high-concentration metabolites. To validate these products, EMMA compared the set of putative derivatives with the set of metabolites documented in ECMDB as part of E. coli metabolism. For the overlapping set, we generated corresponding atom-balanced reactions by adding suitable cofactors and/or co-substrates to the substrate-derivative pair suggested by PROXIMAL. The balanced reactions were compared with data recorded in EcoCyc and KEGG. Our workflow generated a list of 23 new reactions that should be utilized to extend the iML1515 model, including parallel reactions between existing metabolites, novel routes to existing metabolites, and new paths to new metabolites. Importantly, this study is foundational in providing a systemic way of coupling computational predictions with metabolomics data to explore the complete metabolic repertoire of organisms. The described workflow can be applied to any organism utilizing its metabolic model to predict sample-specific promiscuous enzymatic byproducts. Applying this workflow to other biological samples and their metabolomics data promise to enhance our understanding of natural, synthetic, and xenobiotic metabolism.
Step 1—Predict promiscuous products using PROXIMAL
EMMA used PROXIMAL to predict putative products that can be added to the model. PROXIMAL utilizes RDM patterns  specific to the model’s reactions to create lookup tables that map reaction centers to structural transformation patterns. An RDM pattern specifies local regions of structural similarities/differences for reactant–product pairs based on a given biochemical reaction. An RDM pattern consists of three parts: (i) A Reaction Center (R) atom exists in both the substrate and reactant molecule and is the center of the molecular transformation. (ii) Difference Region (D) atoms are adjacent to the R atom and are distinct between substrate and product. (iii) Matched Region (M) atoms are adjacent to the R atom but remain unmodified by the transformation. All atoms are labelled using KEGG atom types . PROXIMAL constructs a lookup table of all possible biotransformations that can occur due to promiscuous activity of enzymes based on the RDM patterns of reactions catalyzed by enzymes associated with genes in the iML1515 gene list. The “key” in the lookup table consisted of the R and M atom(s) in the reactant, while the “value” is the R and D atom(s) in the product. The biotransformation operators in the lookup table were then applied to model metabolites. The outcome of this step is a list of predicted products due to putative enzymatic activity.
Step 2—Compare predicted products with metabolomics dataset
Metabolites predicted by PROXIMAL were compared with measured metabolic data in ECMDB. ECMDB contains 3760 metabolites detected in E. coli strain K-12 and related information such as reactions, enzymes, pathways, and other properties. This information was either collected from resources and databases such as EcoCyc, KEGG, EchoBase , UniProt [56, 57], YMDB , and CCDB , or from literature, or validated experimentally by the creators of ECMDB. Partial information about metabolites such as KEGG compound IDs, metabolites cell location, and chemical formulas is provided in ECMDB.
For each putative product, a mol file was generated and then converted to a SMILES string using Pybel , a python wrapper for the chemical toolbox Open Babel . Based on the SMILES string, we initially retrieved the corresponding PubChem ID and InchiKey from PubChem using Pybel. To ensure consistency, we confirmed that retrieved PubChem IDs and InchiKeys of PROXIMAL predicted metabolites matched the corresponding entries in ECMDB. During this process, we noted some discrepancies. In some cases, the information retrieved from PubChem, such as InchiKeys did not match those in ECMDB. In cases of a mismatch, we sought additional information to confirm metabolite identities of ECMDB products. We utilized the values of the CAS ID, BioCyc ID, Chebi ID and KEGG ID fields to retrieve PubChem IDs using Pybel. The retrieved PubChem IDs are used to determine the ID through a majority vote. For example, if the PubChem ID associated with InchiKey, KEGG ID and CAS ID matched, but did not match the PubChem ID provided in ECMDB, then we considered the one retrieved by Pybel as the correct PubChem ID. Out of 3760 metabolites in ECMDB, we identified 3397 metabolites with consistent information with data retrieved from PubChem. Once PubChem IDs were identified for ECMDB metabolites, we compared our predicted metabolites against ECMDB metabolites using PubChem IDs.
Step 3—Curation of stoichiometric reactions
If a metabolite predicted by PROXIMAL was in ECMDB, then steps 1 and 2 resulted in the identification of a verifiable predicted promiscuous transformation of an E. coli metabolite. Each predicted transformation was manually examined and compared against the RDM pattern causing the transformation. Transformations were discarded if the they seemed infeasible, if the substrate was a cofactor, or if the RPAIR entry associated with the PROXIMAL operator required the presence of more than one Reaction Center (R). For each valid verifiable predicted transformation by PROXIMAL, we developed a new reaction by examining the reaction(s) template associated with the enzymatic transformation and adding suitable cofactors to the reactant and product of the biotransformation identified. The set of developed balanced reactions, where the added cofactors to a reaction caused the number of atoms of reactants and products to match on both sides of the reaction, are then compared to reactions recorded in EcoCyc, KEGG, or the literature.
The outcomes were divided into four categories. C1 reactions consisted of metabolites predicted by PROXIMAL that are already in iML1515 but catalyzed by different enzymes than the ones already listed in the model. These reactions reflect promiscuous activity that enabled the same biotransformation catalyzed by a different gene in the model. C2 reactions already existed in EcoCyc and/or KEGG but not in iML1515. This reflected a curation problem where some reactions were not included in the iML1515 model. C3 reactions were not in EcoCyc but documented in KEGG for other organisms. C4 reactions did not exist in either EcoCyc nor in KEGG. These reactions were thus novel reactions that have not been reported in the literature.
SH conceived the EMMA concept. SA developed the EMMA workflow. EC curated the results. VP verified the analysis. NN and SH supervised the work done through the development of the workflow and data curation. Manuscript was written by SA and EC, reviewed by VP, and revised by NN and SH. All authors read and approved the final manuscript.
This work is funded under NSF Grant #1421972 and NIH Grants 1DP2HD091798 and 1R03CA211839-01.
Ethics approval and consent to participate
Consent for publication
The authors declare that they have no competing interests.
- 7.Furusawa C, Horinouchi T, Hirasawa T, Shimizu H. Systems metabolic engineering: the creation of microbial cell factories by rational metabolic design and evolution. In: Zhong JJ, editor. Future trends in biotechnology. Berlin: Springer; 2012. p. 1–23.Google Scholar
- 52.Rakus JF, Kalyanaraman C, Fedorov AA, Fedorov EV, Mills-Groninger FP, Toro R, et al. Computation-facilitated assignment of the function in the enolase superfamily: a regiochemically distinct galactarate dehydratase from Oceanobacillus iheyensis. Biochemistry. 2009;48(48):11546–58.PubMedPubMedCentralCrossRefGoogle Scholar
- 53.Hassanpour N. Computational methods to advance directed evolution of enzymes and metabolomics data analysis. Tufts University; 2018.Google Scholar
- 59.Sundararaj S, Guo A, Habibi-Nazhad B, Rouani M, Stothard P, Ellison M, et al. The CyberCell Database (CCDB): a comprehensive, self-updating, relational database to coordinate and facilitate in silico modeling of Escherichia coli. Nucleic Acids Res. 2004;32(suppl_1):D293–5.PubMedPubMedCentralCrossRefGoogle Scholar
Open AccessThis article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.