Abstract
This paper proposes two cyclostationarity-inducing transmission methods that enable the receiver to distinguish among different systems that use a common orthogonal frequency division multiplexing- (OFDM-) based air interface. Specifically, the OFDM signal is configured before transmission such that its cyclic autocorrelation function (CAF) has peaks at certain preselected cycle frequencies. The first proposed method inserts a specific preamble where only a selected subset of subcarriers is used for transmission. The second proposed method dedicates a few subcarriers in the OFDM frame to transmit specific signals that are designed so that the whole frame exhibits cyclostationarity at preselected cycle frequencies. The detection probabilities for the proposed cyclostationarity-inducing transmission methods are evaluated based on computer simulation when optimum and suboptimum detectors are used at the receiver.
Similar content being viewed by others
Publisher note
To access the full article, please see PDF
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 2.0 International License (https://creativecommons.org/licenses/by/2.0), which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.
About this article
Cite this article
Maeda, K., Benjebbour, A., Asai, T. et al. Cyclostationarity-Inducing Transmission Methods for Recognition among OFDM-Based Systems. J Wireless Com Network 2008, 586172 (2008). https://doi.org/10.1155/2008/586172
Received:
Revised:
Accepted:
Published:
DOI: https://doi.org/10.1155/2008/586172